1. Introduction and Overview
The ZIBOO 15B PRO and 17B PRO are advanced True RMS Digital Multimeters designed for a wide range of electrical applications. These multimeters feature a two-color protective cover, a hand-held non-slip ergonomic design, and a large LCD display, offering multi-functionality, high precision, high performance, and robust safety features. They are essential tools for professional electricians, electronic technicians, DIY enthusiasts, and for use in homes and factories.
These meters can accurately measure AC/DC voltage, AC/DC current, frequency, continuity, diode, resistance, capacitance, and include features like high voltage alarm, battery load testing, Non-Contact Voltage (NCV), and Live wire detection. Built-in misoperation circuit protection ensures safety and reliability during use.
ZIBOO 17B PRO Digital Multimeter
ZIBOO 15B PRO Digital Multimeter
2. Safety Information
This product strictly adheres to the safety standards of European Electrotechnical Commission EN61010-1 and China GB T 13978. Always read and follow these safety guidelines before operation.
General Safety Guidelines:
- Always operate the instrument in strict accordance with the provisions of this manual.
- Measure only within the specified range for each function. Do not rotate the gear during measurement to prevent damage from misoperation.
- To avoid potential electrical shock, do not touch live conductors exceeding 30V AC or 60V DC during measurement.
- When measuring AC and DC over 599V, the meter will display a high voltage lightning symbol and emit a buzzer sound. Exercise extreme caution.
- Do not use the multimeter in flammable or explosive environments.
- To avoid measurement errors, replace the battery immediately when the low battery symbol () is displayed.
- Before each measurement, inspect the test leads and wires for any damage or leakage. Do not use if any damage is found.
- Comply with all national regulations and measurement safety standards. Wear insulating gloves or other flame-retardant personal protective equipment when measuring hazardous voltages.
Safety Codes and Standards:
- Safety Level: CAT III 600V, CAT II 1000V
- Pollution Grade: 2
- Safety Codes: CE EN61010-1-2-030
- Electromagnetic Environment: EN61326-1-2
- Double Insulation:
Double insulation or enhanced insulation protection.
3. Package Contents
Upon opening the package, please verify that all items listed below are present and undamaged:
- Multimeter x1 (ZIBOO 15B PRO or 17B PRO)
- User Manual x1
- Test Probe Set x1
- Thermocouple x1 (for temperature measurement, typically included with 17B PRO)
Typical package contents for ZIBOO 15B PRO
4. Key Features
- True RMS Measurement: Provides accurate readings for non-sinusoidal waveforms.
- High Count Display: 6000 counts for precise measurements.
- Wide Measurement Ranges:
- AC/DC Voltage: Up to 1000V (15B PRO), up to 1500V (17B PRO).
- AC/DC Current: Up to 10A.
- Resistance: Up to 60MΩ.
- Capacitance: Up to 60mF.
- Frequency: Up to 400kHz (17B PRO).
- Temperature: Up to 1000°C (17B PRO).
- Non-Contact Voltage (NCV) Detection: Buzzer alarm and on-screen display for live wire detection without physical contact.
- Live Wire Detection: Identifies live electrical lines.
- Continuity Test: With green LED flash and buzzer for quick circuit checks.
- Diode Test: For checking diode functionality.
- VFD (Variable Frequency Drive) AC Voltage: Measures AC voltage in variable frequency environments (up to 600V).
- Data Hold Function: Freezes the displayed reading for easy recording.
- Backlight Function: Bright white backlight for clear visibility in all lighting conditions.
- Auto Power Off: Automatically shuts down after approximately 15 minutes of inactivity to save battery.
- Overload Protection: Built-in double fuse with overload protection to prevent damage from operational errors.
- Optional Current Clamp: Supports AC current measurement up to 600A with an optional clamp accessory.
Key measurement functions and features
Sensitive NCV (Non-Contact Voltage) detection
Intelligent anti-burning protection with internal fuses
5. Technical Specifications
Below are the detailed technical specifications for the ZIBOO 15B PRO and 17B PRO digital multimeters.
General Specifications:
- Maximum Display: 6000 counts
- Sampling Rate: 3 times/second
- Overload Display: "OL"
- Auto Power Off: Approximately 15 minutes
- Operating Temperature: 0°C to 40°C
- Precision: 23°C ± 5°C (18-28°C; Humidity <75%); 1 year
- Storage Temperature: -10°C to 60°C; Storage Humidity ≤80%
- Altitude: 0-2000m
- Power: AA 1.5V x 3 batteries
- Dimensions: 183 x 91 x 45 mm (7.2 x 3.58 x 1.77 inches)
- Weight: 402g (inclusive of battery)
Product Dimensions
Measurement Ranges and Accuracy:
| Function | 15B PRO Range | 17B PRO Range | Resolution | Accuracy |
|---|---|---|---|---|
| DC Voltage (DCV) | 60.00mV, 600.0mV, 6.000V, 60.00V, 600.0V, 1000V | 60.00mV, 600.0mV, 6.000V, 60.00V, 600.0V, 1500V | 0.01mV to 1V | ±(0.5%+3) to ±(0.8%+5) |
| AC Voltage (ACV) | 6.000V, 60.00V, 600.0V, 1000V | 6.000V, 60.00V, 600.0V, 1000V | 0.001V to 1V | ±(0.8%+5) to ±(1.2%+5) |
| Frequency (Hz) | 10.00Hz to 60KHz | 10.00Hz to 1.000KHz | 0.01Hz to 0.01KHz | ±(0.5%+5) |
| Resistance (Ω) | 600.0Ω to 60.00MΩ | 600.0Ω to 60.00MΩ | 0.1Ω to 0.01MΩ | ±(1%+5) to ±(2.5%+5) |
| DC Current (DCA) | 600.0uA to 10.00A | 600.0uA to 10.00A | 0.1uA to 0.01A | ±(0.8%+5) to ±(2%+5) |
| AC Current (ACA) | 600.0uA to 10.00A | 600.0uA to 10.00A | 0.1uA to 0.01A | ±(1%+5) to ±(2%+5) |
| Capacitance | 6.000nF to 6000uF | 6.000nF to 60000uF | 0.001nF to 0.1mF | ±(1.5%+5) to ±(8%+5) |
| Temperature (°C/°F) | N/A | -50°C to 1000°C (-58°F to 1832°F) | 1°C / 1°F | ±(1.5%+4) to ±(2%+5) |
| Continuity | Buzzer beeps | N/A | N/A | |
| Diode | 0.500V-0.800V | 0.001V | N/A | |
| NCV | 50V-1000V (0-5cm non-contact induction) | N/A | N/A | |
| LIVE | 50V-1000V (Measure the live line) | N/A | N/A | |
| Current Clamp (Optional) | 60.0A (AC/DC), 600.0A (AC/DC) | 0.1A | ±(3%+5) | |
6. Initial Setup
6.1. Battery Installation
The ZIBOO multimeter requires three AA 1.5V batteries (LR06-AA). Batteries are not included. To install or replace batteries:
- Ensure the multimeter is turned OFF and disconnect all test leads from the meter and any circuits.
- Locate the battery cover on the back of the multimeter.
- Unscrew the battery cover.
- Insert three AA 1.5V batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
- Replace the battery cover and securely screw it back into place. The meter can only be used normally after the battery cover is tightly screwed.
Back of the multimeter with battery compartment
6.2. Connecting Test Leads
Always connect the test leads correctly to the appropriate input jacks for the desired measurement function.
- COM Jack (Black): This is the common ground input. Always connect the black test lead to this jack.
- VΩHz Jack (Red): Connect the red test lead to this jack for measuring voltage, resistance, frequency, capacitance, diode, and continuity.
- mAμA Jack (Red): Connect the red test lead to this jack for measuring small DC/AC currents (up to 600mA).
- 10A Jack (Red): Connect the red test lead to this jack for measuring large DC/AC currents (up to 10A).
WARNING: Never input AC 220V when measuring current in series circuit. Ensure correct lead connection before applying power.
Connecting test leads to the multimeter
7. Operating Modes and Functions
The ZIBOO multimeter features a rotary dial switch for selecting primary measurement functions and several function keys for additional settings.
7.1. Rotary Dial Switch Functions:
Rotate the central dial to select the desired measurement mode:
- OFF: Turns the multimeter off.
- mV: DC millivolt measurement.
- V~Hz: AC voltage and frequency measurement.
- Ω: Resistance measurement.
- Continuity/Diode: For continuity testing (with buzzer) and diode testing.
- Capacitance: Capacitance measurement.
- NCV/LIVE: Non-Contact Voltage and Live wire detection.
- μA/mA/A: DC/AC current measurement (select appropriate jack for range).
- Temperature (°C/°F): Temperature measurement (17B PRO only, requires thermocouple).
7.2. Function Keys:
- HOLD: Short press to freeze the current reading on the display. Press again to release.
- RANGE: Switches between auto-ranging and manual ranging.
- MAX/MIN: Displays the maximum or minimum measured value.
- MODE/VFD: Short press to switch between sub-functions within a main mode (e.g., AC/DC, Continuity/Diode). Press and hold for 3 seconds to activate VFD (Variable Frequency Drive) measurement mode.
- Backlight Button (*): Activates the display backlight. The backlight typically stays on for 30 seconds.
7.3. Measurement Examples:
- DC Voltage Test: Connect red lead to VΩHz, black lead to COM. Select DCV on the dial. Apply probes to the DC source (e.g., battery, automotive system).
- AC Voltage Test: Connect red lead to VΩHz, black lead to COM. Select V~Hz on the dial. Apply probes to the AC source (e.g., wall outlet).
- Resistance Test: Connect red lead to VΩHz, black lead to COM. Select Ω on the dial. Apply probes across the component.
- Capacitance Test: Connect red lead to VΩHz, black lead to COM. Select Capacitance on the dial. Apply probes across the capacitor.
- NCV (Non-Contact Voltage) Test: Select NCV/LIVE on the dial. Bring the top of the meter near a live AC source. The meter will flash a red light and buzz.
- Short-Circuit Test (Continuity): Connect red lead to VΩHz, black lead to COM. Select Continuity/Diode on the dial. Touch probes together; a green LED will flash and a beeping sound will occur.
- AC Current Test (with optional clamp): Connect the current clamp to the meter. Select the current clamp function on the dial. Clamp around the conductor.
Product demonstration video showing various measurement functions.
Multimeter in various usage scenarios
8. Maintenance
8.1. Replacing Fuses
WARNING: Disconnect all test leads from the circuit and the meter before replacing fuses to avoid electric shock.
The ZIBOO multimeters are equipped with two fuses for protection:
- F1: 500mA/1000V, 6.3x31.5mm (for mA/μA range)
- F2: 10A/1000V, 6.3x31.5mm (for 10A range)
To replace a fuse, open the battery compartment (as described in Section 6.1) and then carefully access the fuse holders. Replace only with fuses of the specified type and rating.
8.2. Replacing Batteries
Refer to Section 6.1 for detailed instructions on battery installation and replacement. Always ensure the meter is OFF and leads are disconnected before opening the battery compartment.
8.3. Repair and Service
For repairs, the multimeter cover should only be opened by an approved and professionally experienced technician. If a fault cannot be resolved, please contact ZIBOO official after-sales service. Non-professionals should not attempt repairs to avoid damage to the instrument or risk of electric shock due to improper maintenance.
9. Troubleshooting
- Display shows "OL": This indicates an overload or out-of-range measurement. Ensure your measurement is within the meter's capabilities for the selected range.
- Low Battery Symbol () Displayed: The batteries are low and need to be replaced. Refer to Section 6.1 for battery replacement instructions.
- No Reading or Incorrect Reading:
- Check if the test leads are securely connected to the correct input jacks and the circuit.
- Ensure the rotary dial is set to the appropriate function for your measurement.
- Verify that the test leads are not damaged or broken.
- If measuring current, check if the fuses are intact (refer to Section 8.1).
- Meter does not turn on: Check battery installation and ensure batteries are fresh.
10. User Tips
- Test Leads: While the included test leads are decent, consider investing in a higher-quality silicone test lead set for improved flexibility and durability, especially for frequent use.
- Fuse Replacement: Be aware that finding exact replacement 10A Fast fuses for 1000V that match the internal size can be challenging. It's advisable to have spares on hand if possible.
- Backlight Behavior: The backlight automatically turns off after approximately 30 seconds to conserve battery. This is a fixed behavior and not user-configurable.
- Stand Stability: Some users have noted that the kickstand on the back can be a bit loose. Exercise caution when relying on it for stability.
- Battery Type: The multimeter can be powered by three rechargeable NiMh AA batteries.
- Measurement Speed: The meter is generally praised for its fast measurements, particularly for capacitance and continuity.
11. Warranty and Support
The ZIBOO 15B PRO / 17B PRO Digital Multimeter typically comes with a 1-year guarantee.
For technical support, warranty claims, or any inquiries, please contact ZIBOO customer service:
- Telephone: +86-532-88900998
- E-Mail: sales-support@ziboo.online