01) Safety Information
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SANE INSTRUCTIONS.
- To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.
- All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less".
- The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor.
- Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
- Do not place objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.
- Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- All setscrews must be checked and re-tightened where necessary before installation.
WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
WARNING: To avoid possible electrical shock, make sure that the electricity is turned off at the main power box before starting work. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting bracket is supported directly from the building structure or the outlet box marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less". Use only the screws provided with the outlet box.
03) Pre-installation: Tools Required
- Phillips screwdriver
- Flat blade screwdriver
- Step ladder
- Drill
- Wrench
04) Pre-installation: Package Contents
The following components are included in your package. Please verify all parts are present and undamaged.
| Item | Description | Quantity |
|---|---|---|
| AA | Tapping Screws | 4 |
| BB | Expansion Bolts | 2 |
NOTE: Hardware not shown to actual size.
| Item | Description | Quantity |
|---|---|---|
| A | Fan-motor assembly | 1 |
| B | Pin cover | 1 |
| C | Canopy | 1 |
| D | Downrod | 1 |
| E | Inside canopy | 1 |
| F | Decorative cover | 1 |
| G | Remote control unit | 1 |
| H | Controller | 1 |
| I | Installation instruction | 1 |
05) Assembly Instruction
1. Install the Downrod
For Wooden Ceiling:
- Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Self Tapping Screws (B) will be drilled.
- Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, install the mounting bracket onto wooden ceiling with the 4 Self Tapping Screws (B).
▲ IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG

Image: Mounting bracket (A) and Tapping Screws (B) for wooden ceiling installation.
For Concrete Ceiling:
- Use the Mounting Bracket (A) as a guide, mark the spots where the 2 Expansion Bolts (B) will be drilled.
- Remove the Mounting Bracket (A). Drill 2 holes for 8MM diameter and insert 2 Expansion Bolts (B) into the concrete ceiling, install the mounting bracket and secure with Flat Washers (C), Spring Washers (D) and Nuts (E).
▲ IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG

Image: Mounting bracket (A), Expansion Bolts (B), Flat Washers (C), Spring Washers (D), and Nuts (E) for concrete ceiling installation.
06) Assembly Instruction (continued)
1. Install the Downrod
- Insert the canopy and the Bolt & Pin cover onto the downrod. Carefully feed motor wires through the downrod assembly.
- Slide the ball down the downrod.
- Put the round latch in.
- Replace the hanger ball at its normal position.
- Secure the two screws.

Image: Visual guide for downrod assembly, showing the sequence of parts and securing screws.
07) Assembly - Hanging the Fan
- Thread the suspender through the suspended clock and coupling cover.
- Then insert the tail of the suspender from the liing head of the motor.
- Remove the lateral pin out from the suspended head posion, secure with R type pin (Clevis pin).
- Tighten the liing head screws. Tighten the 2 Set Screws on the Coupling to serve as a clamping force on the Downrod to prevent fan shaking during operaon.
- Route the Coupling cover, Canopy Ring, Canopy and Hanger Ball through the Downrod in turn, and then install the Lock pin through the hole on the Downrod. Fix it by Screw, then slip down the Coupling Cover in correct posion.
Installing Remote Control Receiver
Once wiring step has been completed, slide the wired remote receiver in between the mounting bracket and the top of the downrod ball for downrod fans.

Image: Illustration of how to install the remote control receiver between the mounting bracket and downrod ball.
Install the Canopy
- Carefully push the canopy to the bottom of the mounting bracket, make two sliding holes aligned to the two prominent screws on the mounting bracket, and then turn clockwise until tight.
- Push the canopy ring to the bottom of the canopy, slide the inner holes aligned to the two prominent screws on the mounting bracket again, and turn the canopy ring clockwise until tight.

Image: Visual guide for installing the canopy and canopy ring onto the mounting bracket.
08) Operating Instructions
Remote Control Functions

Image: Diagram of the remote control with each button numbered and described below.
- NO/OFF: Turns the fan/light on or off.
- Wind speed 1-6 gear: Adjusts fan speed from 1 (low) to 6 (high).
- Increased brightness: Increases the light brightness.
- Reduced brightness: Decreases the light brightness.
- Fan forward/reverse switch: Changes the direction of fan rotation (for summer/winter mode).
- General (turn off all functions): Turns off all active functions.
- Turn off the fanCode: Disables fan control.
- Increased color temperature: Adjusts light to a cooler color temperature.
- Lower color temperature: Adjusts light to a warmer color temperature.
- Natural Wind: Activates natural wind mode.
- 2-hour time: Sets a 2-hour timer for operation.
- Night light: Activates night light mode.
Note: The remote control must match the same code receive.
11) Instruction of APP Control
- Step 1: Scan the QR Code to download the app and install it on your phone.
- Step 2: Turn on the light and search for the light in the app, then pair them.
- The buttons 1-6 on the app control the power of the fan.
- To pair, turn on the light and press the pairing button in the app immediately.
- The app allows changing the color temperature.
- There are separate power switches for the lamp and the fan within the app.

Image: Screenshot of the mobile application interface for controlling the fan and light, showing fan speed, light settings, and pairing instructions.
Video: Demonstration of the IRALAN Ceiling Fan with Light, showcasing its adjustable light colors, fan speeds, and invisible blade design in various room settings.
12) Remote Control Wiring Diagram
WARNING: Turn off the electric power during installation and making wire connection.
- Connect the wire which from ceiling fan into the receiver.
- Connect the wire from receiver with the wire from house.

Image: Detailed wiring diagram showing connections from the ceiling fan to the receiver and from the receiver to the house wiring (Live, Neutral, Ground).
13) Care and Cleaning
WARNING: Make sure the power is off before cleaning your fan.
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
- Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
- You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
- You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.
14) Troubleshooting
| Problem | Solution |
|---|---|
| The fan will not start |
|
| The fan is noisy |
|
Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | CY01-FAN |
| Item Type | Ceiling Fans |
| Style | Modern Style |
| Installation Method | Assembly |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Power Source | AC |
| Nominal Voltage | 120V-240V (220V specified in description) |
| Body Material | ABS, iron (ABS+iron+PMMA specified in description) |
| Light Source | LED bulbs |
| Is Bulbs Included | No (implies integrated LED, not separate bulbs) |
| Is Dimmable | No (Stepless dimming specified in description) |
| Number of Lights | 1 pcs |
| Luminous Flux | 2000-82000 (4400LM for 42 inch, 4800LM for 48 inch specified in description) |
| Finish | None |
| Features | Invisible Fan Lamps |
| Is Batteries Included | No |
| Certification | CCC, CE |
| Base Type | Wedge |
| Origin | Mainland China |
| Weight | 5.435kg (Product package weight: 5.66kg) |
| Warranty | 2 years |
| 42 inch Dimensions | 105 x 105 x 35 cm |
| 42 inch Power | 55W |
| 42 inch Lumen | 4400LM |
| 48 inch Dimensions | 121 x 121 x 35 cm |
| 48 inch Power | 60W |
| 48 inch Lumen | 4800LM |
| Application Space | 10-20㎡ |
02) Warranty & Support
To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and re-installing the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of "wobble" is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hereby disclaims any and all warranties, including but not limited to those of merchant ability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.
For after-sales support, please contact: sxdsltd@163.com
User Tips
- Some users have noted that the remote control's lamp button and fan operation button might be swapped in function. If you experience this, try pressing the other button to achieve the desired action.
- The mobile app control feature may not be compatible with all smartphone models or operating systems. Ensure your device meets the app's requirements for optimal functionality.