Ridstar H26 Pro

Contents

Ridstar H26 Pro Electric Bicycle User Manual

Your guide to safe and efficient operation of your H26 Pro E-bike.

1. Important Safety Warnings

⚠️ Disclaimer: Please be aware of potential fire risks and strictly follow this instruction manual for charging and storage. When using the product, always wear appropriate protective equipment and fully comply with all applicable laws and regulations.

  • Always wear a helmet and other protective gear (gloves, knee pads) when riding.
  • Familiarize yourself with local traffic laws and regulations regarding electric bicycles.
  • Perform a pre-ride inspection before each use.
  • Do not operate the e-bike under the influence of alcohol or drugs.
  • Avoid riding in extreme weather conditions.

2. Product Overview

The Ridstar H26 Pro is a powerful and versatile folding electric mountain bike designed for adult riders. It features a 1500W brushless motor, a 48V 23AH removable lithium battery, and 26-inch fat tires suitable for various terrains. Its foldable design allows for convenient storage and transport.

Ridstar H26 Pro Electric Bicycle overview
Figure 2.1: Ridstar H26 Pro Electric Bicycle
Front-side view of the Ridstar H26 Pro Electric Bicycle
Figure 2.2: Front-side view of the H26 Pro

3. Setup and Assembly

3.1 Unfolding the Bicycle

Your H26 Pro electric bicycle comes partially folded. Follow these steps to unfold it:

  1. Place the bicycle on a flat, stable surface.
  2. Locate the main frame hinge (usually in the middle of the frame).
  3. Release the safety latch and unfold the frame until it locks into place. Ensure the latch is securely fastened.
  4. Adjust the handlebars and seat post to your preferred riding height. Secure all quick-release levers.
  5. Attach the pedals if they are not already installed.
Detail of the folding mechanism of the e-bike
Figure 3.1: Folding mechanism detail

3.2 Initial Battery Charge

Before your first ride, fully charge the battery. Refer to the 'Battery Charging' section for detailed instructions.

4. Operating Instructions

4.1 Intelligent Control Instrument (LCD Display)

The high-definition LCD display provides accurate information about your ride, including power display, speed, and riding mileage.

Close-up of the intelligent control instrument (LCD display)
Figure 4.1: Intelligent Control Instrument (LCD Display)
Intelligent control instrument (LCD display) showing electricity, speed, and current gear
Figure 4.2: LCD Display showing Electricity, Speed, and Current Gear

4.2 Riding Modes

The H26 Pro offers three types of power support, providing a versatile riding experience:

Diagram illustrating the three riding modes: Bike Mode, Assisted Riding, and Throttle Mode
Figure 4.3: Three Riding Modes
  • Bike Mode: No power assistance. Ride like a traditional bicycle with zero power consumption.
  • Assisted Riding (PAS Mode): Turn on the power and gently pedal. The motor will provide assistance, making pedaling easier. No need to twist the throttle.
  • Throttle Mode: Turn on the power and twist the throttle to move forward without pedaling.

4.3 Lighting System

  • LED Night Light: The front LED light ensures clear visibility of road conditions at night, enhancing riding safety.
  • LED night light for clear visibility during night riding
    Figure 4.4: LED Night Light
  • Smart Rear Lights: When you apply the brake, the rear taillights will increase in brightness, promptly warning vehicles behind you to slow down.
  • Smart rear lights feature, illuminating when braking
    Figure 4.5: Smart Rear Lights

5. Maintenance

5.1 Battery Charging

The H26 Pro is designed for two convenient charging modes:

Illustration of the two charging modes: direct and detachable battery charging
Figure 5.1: Two Charging Modes
  • Direct Charging: Plug the charger directly into the charging port on the bicycle frame.
  • Detachable Charging: The battery can be easily removed from the frame for charging indoors or separately.

A full charge typically takes approximately 6 hours, providing a pure electric cruising range of up to 80km and an electric power assisting range of up to 120km.

Illustration of the 23AH Lithium Battery, showing range and charging time
Figure 5.2: 23AH Lithium Battery Performance

5.2 General Care

  • Regularly clean your e-bike with a damp cloth. Avoid high-pressure washing directly on electrical components.
  • Check tire pressure before each ride. The 26"x4.0 fat tires are designed for all terrain.
  • 26"x4.0 fat tire adapting to all terrain
    Figure 5.3: 26"x4.0 Fat Tire
  • Inspect brakes (oil brake system) for proper function and wear.
  • Ensure all bolts and fasteners are tight.
  • Lubricate the chain regularly.

5.3 Suspension System

The H26 Pro features both front and rear suspension for a comfortable ride:

  • Rear Hydraulic Suspension: Lightweight material with a strong shock absorber, rebound, and lock function, suitable for all kinds of terrain.
  • Rear hydraulic suspension system
    Figure 5.4: Rear Hydraulic Suspension
  • Buffer Air Hydraulic Shock Absorber: The front fork utilizes a scientific and effective reinforced shock absorption method for a distinct shock absorption effect.
  • Buffer air hydraulic shock absorber on the front fork
    Figure 5.5: Buffer Air Hydraulic Shock Absorber

6. Troubleshooting

If you encounter issues with your H26 Pro, consider the following common solutions:

  • No Power: Check if the battery is properly inserted and charged. Ensure the power switch is on.
  • Motor Not Assisting: Verify that the PAS (Pedal Assist System) level is set correctly on the display. Check for loose connections to the motor or controller.
  • Brakes Not Responsive: Inspect brake pads for wear and ensure brake levers are properly adjusted. For hydraulic brakes, check fluid levels if you suspect a leak (professional service recommended).
  • Display Not Working: Check battery connection and ensure the display cable is securely plugged in.

For persistent issues, please contact customer support.

7. Specifications

Detailed specifications and dimensions diagram for the H26 Pro
Figure 7.1: H26 Pro Dimensions and Key Specifications
Ridstar H26 Pro Electric Bicycle Specifications
FeatureSpecification
Model NumberH26 Pro Urban Travel E-bicycle 1500W Motor 48V23AH
MotorBrushless 1500W motor
Battery48V 23AH Lithium Battery (Removable)
Max Speed30 - 50 KM/H (approx. 18.6 - 31 MPH)
Range per Power> 60 km (Pure Electric: up to 80km, Assisted: up to 120km)
Charging TimeApprox. 6 hours
Wheel Size26 inches (26"x4.0 Fat Tire)
Frame MaterialAluminum alloy
FoldedYes
Rated Passenger CapacityTwo Seat
Max Payload330 LBS (approx. 150 KG)
E-Bike Weight70 LBS (approx. 31.75 KG)
Recommended Height5'7" - 6'7" ft (approx. 170 - 200 cm)
CertificationCE
StyleMultifunctional Type

8. User Tips

  • Regularly check all quick-release levers and folding mechanisms to ensure they are securely fastened before each ride.
  • For optimal battery life, avoid completely draining the battery and store it in a cool, dry place when not in use.
  • Familiarize yourself with the intelligent control instrument to effectively monitor your speed, battery level, and riding mode.
  • Adjust the suspension settings to match the terrain for a more comfortable and controlled ride.

9. Warranty and Support

9.1 Warranty Information

The Ridstar H26 Pro Electric Bicycle comes with a three-year warranty. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.