1. Introduction
The LUFI New Fourth Generation X7 is a multifunctional On-Board Diagnostics (OBD) gauge designed to provide real-time monitoring of various vehicle parameters. This device offers a plug-and-play solution for displaying critical information such as water temperature, exhaust temperature, turbo pressure, and more, enhancing driving safety and performance awareness. It features a dual OBD&GPS system, allowing for comprehensive data acquisition from both the vehicle's ECU and satellite positioning.
2. Key Features
- Multifunctional Display: Monitors water temperature, exhaust temperature, turbo pressure, engine RPM, speed, voltage, and many other parameters.
- Dual System: Supports both OBD and GPS data acquisition.
- IPS Screen: Features a 3.5-inch IPS tempered glass display for clear visibility.
- Customizable Interfaces: Offers 7 display interfaces to switch freely, with adjustable font colors and data types.
- Data Logging: Includes a LOG recording function for tracking vehicle performance.
- Performance Testing: Capable of 0-100km/h, 0-200km/h, and 0-400m acceleration tests.
- G-Meter: Measures G-value acceleration (horizontal and longitudinal) for analyzing vehicle handling and performance.
- Gyroscope Function: Real-time monitoring of roll and pitch angles with alarm prompts for driving safety.
- Powerful Alarm Function: Allows users to preset alarm values for various parameters (e.g., speed, water temperature, voltage).
- User Data Customization: Supports 16 customizable data points.
- Plug and Play: Easy installation via the vehicle's OBD port.
3. Package Contents
Please check the package for the following items:
- LUFI X7 Multifunctional OBD Gauge Unit
- OBD Connection Cable
- Mounting Bracket
- Suction Cup Mount
- Allen Key (for adjustments)
- User Manual (this document)

4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SDAO (also marketed as LUFI) |
| Model | X7 |
| Origin | Mainland China |
| Display Screen | 3.5 inch IPS Tempered Glass |
| Dimensions (Unit) | Width: 110mm, Height: 73mm |
| Dimensions (Base) | Width: 62mm, Height: 60mm |
| Data Types Supported | 50+ (e.g., RPM, Speed, Water Temp, Voltage, Fuel Pressure, Exhaust Temp, Turbo Pressure, Altitude, Latitude, Longitude, Pitch, Roll) |
| Customizable Data Points | 16 |
| Alarm Functions | Speed, Shift Speed, Voltage, Water Temperature, Machine Oil Temperature, Turbine/Intake Pressure, Oil Pressure, Fuel Pressure, Exhaust Temperature, Transmission Oil Temperature, Pitch Angle, Roll Angle |

5. Installation
The LUFI X7 is designed for easy plug-and-play installation. Follow these steps:
- Locate OBD-II Port: Identify your vehicle's OBD-II diagnostic port, usually located under the dashboard on the driver's side.
- Mount the Device: Attach the LUFI X7 to your dashboard or windshield using the provided mounting bracket or suction cup mount. Ensure it is securely positioned and does not obstruct your view. The device supports both inverted and standard installations.
- Connect OBD Cable: Plug one end of the OBD connection cable into the LUFI X7 unit and the other end into your vehicle's OBD-II port.
- Route Cable: Carefully route the cable to avoid interference with driving controls and to maintain a tidy appearance.
- Start Vehicle: Turn on your vehicle's ignition. The LUFI X7 should power on automatically.

6. Setup and Configuration
After installation, you may need to configure the device to your preferences. The LUFI X7 offers extensive customization options.
6.1 Initial Data Settings (User Data Customization)
The product comes with user-defined data for most car models. If you need to retrieve or customize data, follow these steps:
- Step 1: Enter User Data Settings
Navigate to the main menu and select "other settings", then "User data settings".
Image: Menu screen showing "User data settings" selection. - Step 2: Select Data Display and PID Command
Within "User Data Settings Menu", choose "Data display and PID command 1" (or other relevant options). The device supports selection of 16 custom data display examples.
Image: Menu screen showing options for "Data display and PID command". - Step 3: Configure and Read Description
Select the desired configuration. Instructions will be displayed. If red letters appear, it indicates no support for that specific profile. You may need to switch to other profiles. To return to the previous level catalog, select the appropriate option.
Image: Screen showing configuration selection and description, with a note about red text indicating no support. - Step 4: Test Data Reading
Test whether the data reading is successful. If successful, proceed to Step 5.
Image: Screen indicating a successful PID instruction test. - Step 5: Synchronize to Internal Data (Optional)
If you synchronize to internal data, the device will perform background reading and consider internal alarm value parameters. If synchronization is not set up, data will be displayed in User Data 1. This can be accessed via "Setting Menu -> Alarm Value Setting".
Image: Screen showing options for data synchronization and alarm value settings.
6.2 Display Settings
- Step 6: Enter Display Settings
From the main menu, click to enter "display settings".
Image: Menu screen showing "display settings" selection. - Step 7: Enter Instrument Type Settings
Within the display settings, click to enter "instrument type settings". Here you can modify the master type and other display preferences.
Image: Menu screen showing "instrument type setting" selection. - Step 8: Adjust Display Areas
Use the up/down buttons to switch to "User Data 1" or other display areas. You can then set the desired parameters for these areas.
Image: Screen showing how to switch and set display areas using up/down buttons.
6.3 Alarm Value Settings
You can customize alarm thresholds for various parameters. If an instrument data exceeds the preset alarm value, the system will provide a reminder or pop-up display.

7. Operating Instructions
7.1 Navigating Display Interfaces
The LUFI X7 offers 7 different display interfaces. Use the navigation buttons on the device to cycle through these interfaces and find the one that best suits your needs. Each interface can display a combination of vehicle data, performance metrics, or GPS information.

7.2 Understanding Displayed Data
The device can display over 50 types of data. Here is a partial list of common data types:
| Category | Data Type |
|---|---|
| Engine Performance | TACHO/RPM, Engine Oil P., Engine Oil T., Water T., Exhaust T., Turbo A/B, Intake Air Temp (IAT), Air/Fuel Ratio |
| Vehicle Speed | Speed, Average Speed, Instant Vehicle Speed |
| Electrical System | VOLT (Battery Voltage) |
| Fuel System | Fuel P., Fuel Quantity, Fuel C. AVG (Average Fuel Consumption) |
| GPS Data | Altitude, Latitude, Longitude, Heading, GPS Time, Total Mileage (ODO), Subtotal Mileage (TRIP) |
| Driving Dynamics | G METER (G-value), ROLL (Roll Angle), PITCH (Pitch Angle) |
| Other | Clock, Running Time after Engine Start |

7.3 G-Meter Function
The G-Meter measures G-value acceleration. During the G-value test, both horizontal and vertical G-values are displayed. The horizontal G-value represents the car's left and right turns and indicates the vehicle's handling performance. The longitudinal G-value represents the acceleration and deceleration of the car, reflecting the vehicle's overall performance. Generally, a larger centripetal G-value (total G-value) indicates better power and stronger acceleration performance.
Calibration: After the instrument is placed, it must be calibrated once. Enter the G-value/gyroscope calibration menu and select "zero position calibration".

7.4 Gyroscope Function
The gyroscope function improves sensitivity and provides real-time monitoring of roll and pitch angles. If these angles exceed preset default values, alarm prompts will be triggered to ensure driving safety. The pitch angle range is -45° to +45°, and the roll angle range is -45° to +45°.

7.5 Performance Tests
The device can conduct various performance tests, including 0-100km/h, 0-200km/h, and 0-400m tests. Access these tests through the performance test menu.

8. Troubleshooting
- Device Not Powering On: Ensure the OBD cable is securely connected to both the LUFI X7 and the vehicle's OBD-II port. Check if the vehicle's ignition is on.
- No Data Displayed (OBD Function): Verify that your vehicle supports the OBD-II protocol. Some older vehicles or specific models might not be fully compatible. Ensure the OBD function is enabled in the device settings. If the OBD function is turned off, GPS-related data will be displayed as fixed values or horizontal bars.

Image: Text indicating that if the OBD function is off, GPS OBD items will show fixed or horizontal bar data. - Inaccurate GPS Data: GPS signals can be affected by interference factors such as driving recorders or windshield protectors with isolated radiation. Ensure the device has a clear view of the sky for optimal GPS reception.
- Alarm Prompts Not Working: Check the "Alarm value setting" menu to ensure that alarm thresholds are correctly configured and enabled.
- Display Issues: If the display is unclear or unresponsive, try restarting the device by disconnecting and reconnecting the OBD cable.
- Fault Code Processing: The device has a fault code processing menu. You can read current fault codes and clear them if necessary.

9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the display screen and device body. Avoid using abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Ensure the OBD cable is not kinked or pinched, as this can damage the internal wiring.
- Software Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and compatibility.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.