Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your BESDER Mini WiFi NVR (Network Video Recorder). Please read this guide thoroughly before use and keep it for future reference.
The BESDER Mini WiFi NVR is an 8-channel H.265 Onvif Network Video Recorder featuring face detection, email alerts, and compatibility with XMEYE and iCSee mobile applications. It supports both 3MP and 5MP camera inputs, offering comprehensive surveillance capabilities for your home or business.
Package Contents
Please check the package for the following items:
- 1x Mini WiFi NVR (8-channel)
- 1x 12V Power Supply
Note: The Hard Disk Drive (HDD) is optional and may not be included depending on your purchase.
Setup Guide
1. Hardware Connection
- Power on the camera(s) and the NVR through their respective power adapters.
- Connect the NVR to your router using a Twisted-Pair Ethernet cable.
- Connect the NVR to a monitor via the HDMI port for local viewing and configuration.
- If installing an HDD (not included), refer to the diagram below for proper installation. The NVR supports up to a 4TB HDD.
The NVR will boot up and display "WIFI NVR" on the monitor. After a short waiting period, a startup wizard will appear.
Video: Demonstrates the initial power-on sequence, NVR boot-up, and basic menu navigation.
2. Mobile App Installation (iCSee)
To monitor your cameras remotely, install the iCSee app on your mobile device:
- Search for "iCSee" in the App Store (iOS) or Google Play Store (Android).
- Alternatively, scan the QR codes below to download and install the app.
Important Notes for App Connection:
- This camera only supports 2.4GHz WiFi networks. Ensure your mobile device is connected to a 2.4GHz network.
- For a stable network connection, place the camera and your mobile device close to the router during setup.
- Avoid using special characters (e.g., @!#$&*) in your WiFi network name (SSID) or password, as this may cause connection issues.
- Turn on location services and WiFi on your mobile device, and grant necessary permissions to the iCSee app.
- If connecting for the first time or experiencing issues, reset the camera (long-press the RESET button for 8s) and try the connection steps again.
3. Registering an iCSee Account
To use the iCSee app, you need to register an account:
- Open the iCSee App and tap the "Sign Up" button.
- Choose your login area, then enter your email/mobile phone number and a password.
- The app will indicate "Waiting for mailbox validation". Check your email for a verification link.
- Click "Verify Now" in the email to activate your account. Once activated, you can log in.
4. Linking the Camera to Your Phone
Follow these steps to add your NVR and cameras to the iCSee app:
- On your mobile phone, go to "Phone Settings" and ensure both Bluetooth and WiFi are turned ON.
- Open the iCSee App. Tap the "+" icon in the center or upper right corner to add a device.
- When prompted for Bluetooth connection confirmation, tap "Confirm".
- The app will automatically search for Bluetooth equipment. Once found, tap "Confirm".
- Confirm your WiFi network and enter your WiFi password.
- Wait for the device to connect to the app.
- Once connected, pick a name for your camera (e.g., "Living Room") and tap "Save".
- Select "Alarm" for recording mode (to record only alarm videos) and tap "Next".
- Open the "Alarm Push Switch" and tap "Done".
- The setup is now successful.
Note: The NVR supports "SYNC" Wireless coding. Press the Reset button on the NVR to perform SYNC wireless code matching for convenient setup.
Operating Instructions
NVR Local Interface
The NVR features a 16-bit true-color graphic menu operation interface, supporting mouse operation for easy navigation.
The NVR supports up to 8 channels of 3MP camera playback or preview, or 4 channels of 5MP camera playback or preview. You can select the channel type from the menu.
Recording and Playback
The NVR supports various recording modes:
- 7x24 Hours Loop Recording: Continuous recording that overwrites the oldest footage when storage is full.
- Motion Detection Recording: Records only when motion is detected, saving storage space.
- Other recording modes can be configured.
You can easily playback recorded footage through the NVR's interface.
Advanced AI Features
- Face Detection and Capture: When used with compatible customized cameras, the NVR can detect and capture faces.
- AI Humanoid Motion Detection: Smart AI technology detects human shapes, sending notifications to your app and recording a short video when abnormal motion is detected.
Remote Viewing (P2P)
You can view your camera feeds remotely using the NVR's serial number:
- Mobile App: Use the XMeye or iCSee app on your smartphone (iOS/Android).
- PC Client: Use the CMS client software on your computer (Windows XP, macOS).
Maintenance
Storage Management
The NVR offers flexible storage options:
- Local Storage: Supports a Micro SD card (up to 128GB) and a 2.5" HDD (up to 4TB). When local storage is full, older footage is automatically overwritten (loop recording).
- Cloud Storage: Supports cloud storage for alarm recordings (subscription may be required).
- Network Storage: Additional network storage options are available.
Resetting the Device
To restore the NVR to its default factory settings, press and hold the Reset button for more than 3 seconds. The device will then restore its default configuration.
Troubleshooting & FAQ
Q1: Where can I find the serial number of the camera?
A: For security reasons, the serial number is not printed on the package. After setting up the camera, you can find it in the NVR's interface under 'Camera Setting' > 'About'.
Q2: Why did I fail to connect the camera to my phone?
A:
- Ensure the camera is connected to a 2.4GHz WiFi network. 5GHz WLAN is not supported.
- Place the camera and your mobile device near the router during the setup process.
- Avoid using special characters (e.g., @!#$&*) in your WiFi network name or password. Adjust if necessary.
- If using a dual-band router, ensure you are connecting to the 2.4GHz band. Contact your router manufacturer for support if needed.
- If connection fails, reset the camera (long-press the RESET button for 8s) and try the connection steps again.
Q3: Why can't the camera recognize the Micro SD Card?
A:
- The camera does not support hot-plugging. Always insert the Micro SD Card before powering on the camera, or reboot the camera after inserting the card.
- Use a high-quality Micro SD Card from a reliable brand.
- Ensure the Micro SD Card is installed correctly.
Q4: Why am I not receiving app alarm notifications?
A:
- Make sure you have enabled 'Smart security' and set it to 'Open' within the app.
- Verify that 'Human detection' is set to 0.6S (or your desired sensitivity) in the app settings.
- Ensure 'No-disturb Settings' is disabled in the app.
- Confirm you are logged into the iCSee app with your registered iCSee account.
- Check your phone's operating system settings to ensure the iCSee app is allowed to send push notifications.
Specifications
| Feature | Specification |
|---|---|
| Model Number | WN1 |
| Brand Name | BESDER |
| Processor | Hi3536E |
| System | Embedded Linux |
| Video Input | 8ch 3M / 4ch 5M |
| Playback | 8ch 3M / 4ch 5M |
| Decode | H.265AI / H.265+ (compatible H.265/H.264) |
| Audio | Voice broadcast, Configure alert tone |
| Inquire Mode | App |
| Storage Mode | HDD, Network, Cloud |
| WiFi Bands | 2.4GHz |
| WiFi Standard | IEEE802.11b/g/n |
| HDMI Output | 1*HDMI (MAX:1080P) |
| SD Card Slot | 1*SD |
| Ethernet Port | 1*RJ45 10/100/1000Mbps |
| USB Port | 2*USB2.0 ports |
| HDD Interface | 1*SATA interface |
| Operating Temperature | 0 °C - +55 °C |
| Operating Humidity | 10% - 90% RH |
| Power Supply | DC12V |
| Power Consumption | <5W |
| Weight | Around 120g |
| Dimensions (L*W*H) | 171mm * 136mm * 37mm |
| Supported Operating Systems | Microsoft Windows XP, macOS |
| Supported Mobile Systems | iPhone OS, Android |
| Video Standard | NTSC, PAL |
| Certification | CE |
User Tips
- The NVR is generally easy to operate, making setup and daily use straightforward.
- For optimal WiFi signal and connection stability, ensure your NVR and cameras are within reasonable range of your 2.4GHz router, especially during initial setup.
- Regularly check your app settings to ensure alarm notifications are enabled and configured to your preference for timely alerts.
- Consider using a high-quality, reliable brand Micro SD card for local storage to ensure consistent recording performance.
Warranty and Support
For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. You can also refer to the official user manual PDF for more detailed information: BESDER Mini WiFi NVR User Manual (PDF).