ASOMETECH 810C

Contents

ASOMETECH 140W GaN Desktop Charging Station

Model: 810C

1. Introduction

Thank you for choosing the ASOMETECH 140W GaN Desktop Charging Station. This intelligent multi-port charger is designed to provide efficient and fast charging for a wide range of devices, including laptops, tablets, and smartphones, all from a single compact unit. Featuring advanced GaN technology, multiple USB-C Power Delivery (PD) ports, and a wireless charging pad, it offers a powerful and versatile charging solution for your desktop.

2. Package Contents

  • ASOMETECH 140W GaN Desktop Charging Station (Model 810C)
  • 1.2M AC Power Cable (EU/US/UK/KR/AU/BR Plug type, depending on region)
  • User Manual

3. Product Overview

The ASOMETECH 140W GaN Desktop Charging Station features a sleek design with multiple charging outputs to accommodate all your devices.

ASOMETECH 140W Fast USB Charging Station with 5 Type-C ports and wireless charger.
Figure 1: ASOMETECH 140W GaN Desktop Charging Station with 5 USB-C ports and a wireless charging pad.

3.1. Port Layout

  • PD1 (USB-C): High-power output, up to 100W.
  • PD2, PD3, PD4, PD5 (USB-C): Standard power output, up to 30W each.
  • Wireless Charging Pad: Located on the top surface, supports up to 15W.
  • LED Indicator: Illuminates when the charger is powered on.
All-in-one design, 140W total power output, charging 6 devices simultaneously (laptop, tablet, phone).
Figure 2: The charging station in use, powering multiple devices simultaneously.

4. Setup

  1. Connect Power Cable: Insert the provided 1.2M AC power cable into the AC input port on the back of the charging station.
  2. Plug into Wall Outlet: Plug the other end of the AC power cable into a standard wall power outlet (AC 100-240V, 50/60Hz).
  3. Power On: The LED indicator on the charging station will light up, indicating that the device is powered on and ready for use.
  4. Placement: Place the charging station on a stable, flat surface, ensuring adequate ventilation around the unit.

5. Operating Instructions

This charging station intelligently distributes power based on the connected devices and the number of ports in use. For optimal performance, refer to the power distribution guidelines below.

5.1. USB-C Port Charging

  1. Connect Device: Use a compatible USB-C to USB-C cable (or other appropriate USB-C cable) to connect your device to any of the PD1-PD5 ports.
  2. Fast Charging: The charger supports various fast charging protocols including PD2.0, PD3.0, PPS, QC, SCP, FCP, BC1.2, Samsung Adaptive Fast Charge, Huawei FCP, USB PD, and Qualcomm Quick Charge. Your device will negotiate the optimal charging speed.

5.2. Wireless Charging

  1. Place Device: Place your Qi-compatible device (e.g., smartphone, earbuds) directly onto the wireless charging pad located on the top of the station.
  2. Alignment: Ensure the device is centered on the pad for efficient charging. Charging will begin automatically.
  3. Output: The wireless charger supports 5W, 7.5W, 10W, and 15W outputs, adapting to your device's capabilities.
Image showing fast wireless charging in action, compatible with 5W/7.5W/10W/15W.
Figure 3: Fast wireless charging in progress.

5.3. Power Distribution Guidelines

The charging station intelligently manages power output across its ports. The maximum output for each port changes when multiple ports are in use. Refer to the diagram and table below for detailed power distribution scenarios.

Diagram showing various power distribution scenarios for 1, 2, 3, 4-5 ports use, and wireless charging.
Figure 4: Power distribution diagram for various port usage scenarios.
Table 1: Power Distribution Scenarios
Ports in UsePower Output
Single Port (PD1)PD1: 100W
Single Port (PD2/3/4/5)PD2/3/4/5: 30W
PD1 + PD2PD1: 100W, PD2: 30W
PD1 + PD3PD1: 100W, PD3: 30W
PD1 + PD4PD1: 100W, PD4: 30W
PD1 + PD5PD1: 100W, PD5: 30W
PD2 + PD3PD2: 30W, PD3: 30W
PD1 + PD2 + PD3PD1: 65W, PD2: 20W, PD3: 20W
PD2 + PD3 + PD4PD2: 30W, PD3: 30W, PD4: 30W
PD1 + PD2 + PD3 + PD4PD1: 65W, PD2: 20W, PD3: 20W, PD4: 20W
PD2 + PD3 + PD4 + PD5PD2: 20W, PD3: 20W, PD4: 20W, PD5: 20W
PD1 + PD2 + PD3 + PD4 + PD5PD1: 45W, PD2: 20W, PD3: 20W, PD4: 20W, PD5: 20W
Wireless ChargingUp to 15W (independent)

6. Maintenance

  • Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Ventilation: Ensure the bottom of the charger is unobstructed during operation to allow for proper heat dissipation.

7. Troubleshooting

7.1. Charger Not Working (LED Indicator Off)

  • Power Connection: Ensure the AC power cable is securely plugged into both the charger and the wall outlet. Try re-plugging or using a different outlet.
  • Input Voltage: Verify that the input voltage from your wall outlet (AC 100-240V) matches the charger's requirements.
  • Cable Issue: If the LED is still off, try replacing the AC power cable.

7.2. Slow Charging Speed or Port Not Charging

  • Charging Cable Quality: Use high-quality USB-C cables that support fast charging (e.g., 1A-3A rated cables). Thin or low-quality cables can limit charging speed.
  • Cable Length: Shorter cables generally perform better. Try using a shorter USB-C cable (preferably within 1 meter).
  • Cable/Port Contact: Ensure the charging cable is fully inserted into both the charger port and your device. Check for any debris or damage in the ports or on the cable connectors.
  • Power Distribution: Refer to Section 5.3 (Power Distribution Guidelines). If many devices are connected, the power to individual ports may be reduced. Disconnect some devices to see if charging speed improves for critical devices.
  • Device Compatibility: Ensure your device supports the fast charging protocols offered by the charger.

8. Specifications

Table 2: Technical Specifications
FeatureSpecification
Model810C (WLX-810C)
InputAC 100-240V, 50/60Hz, 1.5A
Total Output Power140W Max
USB-C Output (PD1)5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W Max)
PPS: 3.3V-21V/5A
USB-C Output (PD2/3/4/5)5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A (30W Max each)
PPS: 3.3V-11V/3A
Wireless Charging Output15W / 10W / 7.5W / 5W
Fast Charge ProtocolsPD2.0, PD3.0, PPS, QC, SCP, FCP, BC1.2, Samsung Adaptive Fast Charge, Huawei FCP, USB PD, Qualcomm Quick Charge, Huawei Quick Charge
MaterialAnti-Fire PC+ABS
Dimensions (L x W x H)124mm x 62mm x 51mm (4.88in x 2.44in x 2.00in)
AC Cable Length1.2M
Safety ProtectionsOver-current, Over-voltage, Over-load, Short-circuit, Over-temperature, Battery Safety
CertificationsCE, ROHS, FCC, EMC
Wide compatibility chart for Laptops, iPhone series, Android mobile phones, and Game Consoles. Includes dimensions and basic specifications.
Figure 5: Device compatibility and dimensions.

9. User Tips

  • Prioritize Devices: If you need maximum power for a specific device (e.g., a laptop), connect it to the PD1 (100W) port first, especially when other high-power devices are also charging.
  • Cable Management: Use cable ties or clips to keep your charging cables organized around the station for a tidy desktop.
  • Travel Companion: Its compact size and multi-plug options make it a versatile travel charger, reducing the number of adapters you need to carry.
  • Check Device Charging Status: Always verify that your device is actively charging (indicated by its charging icon or LED) when placed on the wireless pad or connected via USB-C.

10. Safety Information

Please read and follow these safety instructions carefully to prevent injury or damage to the product.

  • Input Voltage: Always connect the charger to a power source that matches the specified input voltage (AC 100-240V). Operating outside this range may cause malfunction or damage.
  • Disassembly: Do not attempt to disassemble, modify, or repair the charger. It contains high voltage components and should only be serviced by qualified personnel.
  • Heat Dissipation: The charger will generate heat during operation, which is normal. Ensure proper ventilation by keeping the bottom of the unit unobstructed.
  • Environmental Conditions: Do not expose the product to rain, moisture, high humidity, or extreme temperatures. Avoid direct sunlight and placement near heat sources or open flames.
  • Children: Keep the charging station out of reach of children.
  • Overloading: Do not use the charger with electronic products that exceed its charging specifications. This can lead to overheating, damage to the charger, or damage to your devices.
  • Physical Damage: Avoid dropping, hitting, or subjecting the charger to strong impacts.
Multiple protection layers for devices: Over-current protection, Battery Safety, Prevent Overcurrent, Protection System, Prevent Overvoltage, Prevent Overload.
Figure 6: Built-in multiple protection features for device safety.

11. Warranty and Support

ASOMETECH products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your retailer/seller directly. Please retain your proof of purchase for warranty claims.

For further assistance, you may also refer to the official ASOMETECH website or contact their customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.