1. Introduction
Thank you for choosing the MicroData T2161 Mini Portable Tire Inflator. This intelligent digital display air compressor is designed for convenient and precise inflation of tires for bicycles, motorcycles, and various balls. Its compact size, high-speed brushless motor, and accurate pressure control make it an essential tool for on-the-go inflation needs. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Safety Information
- Keep the device away from children.
- Do not use the inflator in wet conditions or near flammable liquids or gases.
- Avoid prolonged continuous operation to prevent overheating. If the device becomes hot, allow it to cool down before further use.
- Do not point the air nozzle at people or animals.
- Ensure the air hose is securely connected to both the inflator and the item being inflated to prevent air leakage or detachment.
- Always check the recommended pressure for the item you are inflating to avoid over-inflation, which can cause damage or injury.
- Use only the provided charging cable and a compatible 5V/2A power adapter.
3. Package Contents
Please check the package contents upon unboxing:

- MicroData T2161 Tire Inflator Unit
- Storage Pouch
- USB Type-C Charging Cable
- Air Hose
- Presta Valve Adapter
- Ball Needle
- General Nozzle Adapter
- User Manual (this document)
4. Product Overview and Features
The T2161 inflator is designed for efficiency and ease of use. Its compact form factor makes it highly portable, while its advanced features ensure accurate and quick inflation.

Key Features:
- Precise Air Pressure: Achieves ±1 PSI accuracy for optimal inflation.
- Micro Vibration Design: Ensures a smooth and quiet operation.
- High-Speed Brushless Motor: Provides powerful and efficient inflation.
- Max Pressure 150PSI: Capable of inflating a wide range of items.
- Multiple Quick Connect Air Nozzles: Versatile for various inflation needs.
- High Voltage Direct Start: Allows immediate inflation without pre-charging.
- Intelligent Chip & Mesh Heat Dissipation: Prevents overheating during extended use.
- Mini Portable Design: Lightweight and easy to carry.

5. Specifications
| Feature | Specification |
|---|---|
| Product Model | T2161 |
| Product Name | Bicycle Wireless Inflator Pump |
| Product Size | 76 x 61 x 35 mm |
| Battery Capacity | 480mAh * 2 / 7.4V |
| Rated Voltage | 7.4V |
| Rated Current | 6A |
| Rated Power | 45W |
| Inflation Pressure Range | 3-150 PSI |
| Continuous Duration | 5 minutes |
| Cylinder Specification | 16 cylinders |
| Working Noise | 80 dB |
| Airflow Rate | 12 L/min |
| Charging Interface | Type-C |
| Inflation Accuracy | ± 1 PSI |
| Charging Parameters | 5V / 2A |

6. Setup and Initial Use
6.1 Charging the Device
- Connect the provided USB Type-C charging cable to the charging port on the inflator.
- Plug the other end of the cable into a 5V/2A USB power adapter (not included) or a compatible USB port.
- The digital display will indicate the charging status. Ensure the device is fully charged before first use for optimal battery life.
6.2 Attaching the Air Hose and Nozzle
- Screw the air hose securely onto the air outlet port of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate:
- Presta Valve Adapter: For Presta bicycle valves.
- Ball Needle: For sports balls.
- General Nozzle Adapter: For other inflatable items.
- Attach the selected nozzle adapter firmly to the other end of the air hose.
7. Operating Instructions
7.1 Power On/Off
- Power On: Press and hold the power button (U symbol) for 2-3 seconds. The digital display will light up.
- Power Off: Press and hold the power button for 2-3 seconds again. The display will turn off. The device will also automatically power off after a period of inactivity.
7.2 Mode Selection
The T2161 offers three preset inflation modes:

- After powering on, press the 'S' button to cycle through the modes: Motorcycle, Bicycle, and Ball.
- Each mode has a default pressure value:
- Motorcycle Mode: Default 2.0 Bar
- Bicycle Mode: Default 45 PSI
- Ball Mode: Default 8 PSI
7.3 Setting Target Pressure
- Once a mode is selected, the default pressure will be displayed.
- Use the '+' and '-' buttons to adjust the target pressure to your desired value. The display will show the current setting.
7.4 Starting and Stopping Inflation

- Connect the air hose with the appropriate nozzle to the item you want to inflate.
- Press the power button (U symbol) briefly to start inflation. The display will show the real-time pressure.
- The inflator will automatically stop when the target pressure is reached.
- To manually stop inflation, press the power button again.
7.5 Switching Pressure Units (BAR/PSI)
While the device is powered on, briefly press the 'S' button to switch between BAR and PSI units on the digital display.

8. Maintenance
8.1 Cleaning
- Wipe the exterior of the inflator with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure no liquids enter the device, especially the air vents or charging port.
8.2 Storage
- Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures.
- Use the provided storage pouch to protect the device and its accessories.
- For long-term storage, charge the battery to about 50-70% every 3-6 months to maintain battery health.
8.3 Battery Care
- Avoid completely draining the battery frequently.
- Do not leave the device charging for excessively long periods after it's full.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery Power button not pressed correctly | Charge the device fully Press and hold the power button for 2-3 seconds |
| Inflator not inflating | Air hose or nozzle not securely attached Target pressure already reached Blocked air inlet/outlet | Ensure all connections are tight Check current pressure on display Inspect for any obstructions |
| Inaccurate pressure reading | Loose connection Sensor malfunction | Ensure air hose is tightly connected Contact customer support if issue persists |
| Device overheats and stops | Prolonged continuous use | Allow the device to cool down for at least 10-15 minutes before resuming use. Avoid continuous operation beyond 5 minutes. |
| Slow inflation | Low battery Air leakage | Recharge the device Check all connections for tightness |
10. User Tips
- Always verify the recommended pressure for your tires or balls before inflating. This information is usually printed on the tire sidewall or the item itself.
- For bicycle tires, especially road bikes, ensure the Presta valve adapter is used correctly and the valve core is open before attaching the inflator.
- When inflating balls, moisten the ball needle before inserting it to prevent damage to the valve.
- Keep the inflator charged, especially before long rides or trips, to ensure it's ready when you need it.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.