1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TF-100 LED Display Throttle Instrument. Designed for electric scooters, particularly compatible with models like the Kugoo M4 Pro, this instrument provides essential ride information and control. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: TF-100 LED Display Throttle Instrument
2. Safety Information
- Always ensure your electric scooter is powered off before performing any installation or maintenance.
- Verify that the voltage of your scooter matches the specifications of the TF-100 display.
- Use appropriate tools, such as an Allen wrench, for secure installation.
- Ensure all connections are secure and waterproofed to prevent short circuits and damage.
- Avoid severe impacts or dropping the display, as this can cause screen damage or internal component failure.
- Do not operate buttons frequently while riding; if mode changes are needed, stop safely first.
- Regularly inspect the display's fastening screws and wire plugs for any looseness.
3. Package Contents
Please check the package for the following items:
- TF-100 LED Display Throttle Instrument (5-pin or 6-pin variant)
- Mounting Bracket
- Connecting Cable
- Fixing Screws
- Allen Wrench (may be included)
Figure 2: TF-100 Display with 5-pin waterproof plug
Figure 3: TF-100 Display with 6-pin and 5-pin connector options
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | TF-100 (For KUGOO M4 Pro Electric Scooter) |
| Type | LED Display Throttle Instrument |
| Voltage | 48V |
| Connector Type | 5 Pin or 6 Pin (Waterproof plug) |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 19 cm, Width: 14 cm, Height: 4 cm |
| Package Weight (approx.) | 0.117 kg |
5. Setup and Installation
Before beginning installation, ensure your electric scooter is turned off and the battery is disconnected for safety.
5.1 Preparation
- Confirm that your electric scooter matches the interface and voltage (48V) of the TF-100 dashboard.
- Gather necessary installation tools, such as an Allen wrench.
5.2 Fixed Bracket Installation
- Insert the clamping bracket of the dashboard onto the handlebar tube of your scooter.
- Align the screw holes on the bracket with the corresponding holes on the handlebar.
- Use an Allen wrench to tighten the fixing screws on the bracket. Ensure the bracket is stable and does not shake.
Figure 4: Mounting bracket detail
5.3 Dashboard Body Installation
- Align the positioning buckle of the dashboard body with the installed bracket.
- Insert the dashboard body onto the bracket.
- Tighten the fixing screws on the side of the dashboard body after insertion. Ensure the dashboard is securely attached and will not loosen or fall off during use.
Figure 5: TF-100 display mounted on a scooter handlebar
5.4 Connection Line
- Securely plug the connecting cable plug of the dashboard into the corresponding interface of the scooter controller.
- Ensure that the plug is fully inserted and not loose.
- Verify the connector type (5-pin or 6-pin) matches your scooter's wiring.
Figure 6: TF-100 display cable and connector
6. Operating Instructions
6.1 Functional Testing
- After installation, reconnect the scooter battery and press the power button on the TF-100 display.
- Check if the dashboard lights up normally.
- Test the mode switching and other functions (e.g., throttle response, gear changes).
- Confirm that all displays (speed, ODO, battery level, gear) and button functions are normal.
Video 1: Demonstration of the TF-100 display's functionality and button operation.
6.2 Button Operation
The TF-100 features a power button and a mode button. Specific functions may vary slightly based on the scooter's controller, but generally:
- Power Button: Press to turn the display on/off.
- Mode Button: Used to cycle through display modes (e.g., Odometer, Trip Distance) or adjust settings.
- Throttle: The thumb throttle controls acceleration.
Caution:
- During riding, avoid frequently operating the buttons.
- If you need to switch modes or adjust settings, always come to a safe stop first to prevent distraction and potential danger.
7. Maintenance
7.1 Waterproof Protection
- Before riding, ensure the connecting plug is properly waterproofed. This prevents rainwater or water from seeping into the interface, which could cause short circuits and damage to the equipment.
7.2 Fall Protection
- Protect the dashboard from severe impacts or drops. Such incidents can shatter the display screen or damage internal components.
7.3 Regular Inspection
- Periodically check the fastening status of the bracket screws and connecting wire plugs, ideally once a month.
- If any looseness is detected, tighten the screws or secure the plugs immediately to prevent accidents or damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not turn on | Loose connection, incorrect voltage, damaged cable, scooter battery off/low. | Check all cable connections, ensure battery is charged and on, verify voltage compatibility. |
| Display shows incorrect speed/ODO | Incorrect settings in the scooter controller, sensor issue. | Consult your scooter's main manual for display calibration or sensor troubleshooting. |
| Buttons unresponsive | Internal fault, water damage. | Ensure no water ingress. If problem persists, contact support. |
| Display loose on handlebar | Mounting screws are loose. | Tighten the bracket and dashboard fixing screws with an Allen wrench. |
9. User Tips
- Compatibility Check: Always double-check the pin configuration (5-pin or 6-pin) and voltage (48V) to ensure compatibility with your specific electric scooter model before purchase and installation.
- Performance Boost: Some users have reported an increase in maximum speed after installing this display, suggesting potential optimization with certain scooter controllers.
- Installation Ease: While no instruction manual was provided with some units, installation is generally straightforward for those familiar with scooter maintenance. Ensure all connections are firm.
- Cable Length: If you have concerns about cable length for your specific scooter, measure your existing cable or handlebar setup before purchasing.
10. Frequently Asked Questions (FAQ)
- Q: Is this display compatible with the Ausom L1 ABE scooter?
- A: Compatibility with specific scooter models like the Ausom L1 ABE should be verified by checking the required voltage (48V) and connector pin configuration (5-pin or 6-pin) against your scooter's specifications. It is primarily designed for Kugoo M4 Pro and similar models.
- Q: What is the length of the 6-pin cable?
- A: The exact cable length is not specified in the product details. It is recommended to measure the required length on your scooter or contact the seller for precise dimensions if this is a critical factor for your installation.
11. Warranty and Support
For detailed warranty information, please refer to the official product documentation or contact your retailer. For technical support or further inquiries, please reach out to the seller or manufacturer.
A user manual in PDF format is available for additional information: View User Manual (PDF)