Introduction
This manual provides instructions for the RONGYIN USB Programming Cable with a Type-C interface. This cable is designed to connect compatible two-way radios to a computer, enabling users to program settings and frequencies using appropriate software.
Product Overview
Image: The USB Programming Cable features a standard USB-A connector on one end and a Type-C connector on the other, with an inline module containing the CH340 chip.
Image: The cable has an approximate length of 102.5 cm (40.35 inches).
Image: Detail of the Type-C interface, which connects to the walkie-talkie.
Setup
1. Driver Installation
Before connecting the cable, ensure that the necessary drivers for the CH340 chip are installed on your computer. If the cable is not recognized, driver installation is typically required. Drivers are generally available from the chip manufacturer's website or can be provided by the seller upon request.
The cable supports the following operating systems:
- Windows XP
- Windows 7
- Windows 8
- Windows 10
- Windows 11
Image: The CH340 chip supports Windows XP, 7, 8, 10, and 11.
2. Connecting the Cable
- Connect the Type-C end of the programming cable to the compatible port on your walkie-talkie.
- Connect the USB-A end of the programming cable to an available USB port on your computer.
- Once connected, verify the assigned COM port in your computer's Device Manager (under "Ports (COM & LPT)"). This information is crucial for the programming software.
Image: A walkie-talkie connected to a laptop via the USB programming cable, illustrating a typical setup for programming.
Operating Instructions
This cable facilitates communication between your walkie-talkie and your computer for programming purposes. You will need specific programming software for your walkie-talkie model.
- Obtain Programming Software: If you do not have the frequency writing software for your specific walkie-talkie model, please contact the seller for assistance.
- Launch Software: Open the programming software on your computer.
- Select COM Port: Within the software settings, select the correct COM port identified in the Setup section.
- Read/Write Data: Follow the software's instructions to read existing settings from your walkie-talkie or write new frequency and configuration data to it.
Maintenance
- Store the cable in a dry place away from direct sunlight and extreme temperatures.
- Avoid bending or kinking the cable sharply to prevent internal damage.
- Keep connectors clean and free from dust or debris.
- Do not pull the cable by the wire; always grasp the connector when plugging or unplugging.
Image: The cable is designed for durability and resistance, ensuring a long lifespan with proper care.
Troubleshooting
Cable Not Recognized
- Driver Check: Ensure the CH340 driver is correctly installed. If not, install it from a reliable source.
- COM Port Verification: Check Device Manager to confirm the cable is assigned a COM port and that the programming software is configured to use the correct port.
- Re-plug: Disconnect and reconnect the cable to both the computer and the walkie-talkie.
- Try Different USB Port: Test the cable with another USB port on your computer.
- Restart Computer: A system restart can sometimes resolve connectivity issues.
Programming Errors
- Software Compatibility: Ensure you are using the correct programming software version for your specific walkie-talkie model.
- Radio Power: Make sure your walkie-talkie is powered on and has sufficient battery.
- Cable Connection: Double-check that the cable is securely connected to both devices.
Specifications
| Feature | Detail |
|---|---|
| Item Type | Programming Cable |
| Brand Name | RONGYIN |
| Chip Name | CH340 |
| Connector A Type (To Connect Walkie Talkie) | Type-C Interface |
| Connector B Type (To Connect PC or Mobile Phone) | USB |
| Adapted System | WinXP, Win7, Win8, Win10, Win11 |
| Length | 102.5cm / 40.35inch |
| Battery Included | No |
| Material | ABS |
Compatible Walkie Talkie Models:
- Iradio UV-98 PLUS
- Iradio UV-99
- Iradio R5000
- Iradio R6000
- Iradio R4900
- Iradio R80
- RT-880
- RT-880G
User Tips
- Driver Verification: Always ensure the correct drivers are installed for the CH340 chip. If the cable isn't recognized, driver issues are the most common cause.
- COM Port Check: After connecting, confirm the COM port in your computer's Device Manager and ensure your programming software is set to use that specific port.
- Secure Connection: While the Type-C connection is generally robust, some users have noted that the USB-A port might feel slightly loose. Ensure all connections are firm before attempting to program.
- Software Support: If you encounter difficulties or need the programming software, reach out to the seller for support.
Warranty and Support
The product comes with a ONE YEAR WARRANTY for the radio and THREE MONTHS for accessories like batteries and chargers. For specific warranty claims or technical support, please contact the seller directly.
If you require frequency writing software for your walkie-talkie model, please contact the seller, and they will provide it.