Jonsbo MOD-3 Mini White

Contents

Jonsbo MOD-3 Mini White PC Gaming Case

Instruction Manual

Model: MOD-3 Mini White | Brand: Jonsbo

1. Introduction

Thank you for choosing the Jonsbo MOD-3 Mini White PC Gaming Case. This manual provides essential information for the proper assembly, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure optimal performance and longevity of your system.

2. Product Overview

The Jonsbo MOD-3 Mini White is a distinctive middle tower PC case designed for gaming enthusiasts. It features a unique aesthetic, support for various cooling solutions, and ample space for high-performance components. The case is constructed with durable materials, including stalinite, and offers a clear view of your internal components.

Jonsbo MOD-3 Mini White PC case with internal components and RGB lighting

Figure 1: Jonsbo MOD-3 Mini White PC Case with Components

Jonsbo MOD-3 Mini White PC case, side view with clear panel

Figure 2: Side View of the PC Case

Video 1: Jonsbo MOD-3 Mini PC Case 360-degree View

3. Specifications

FeatureSpecification
Model NameMOD-3 Mini White
Case TypeMiddle Tower
Motherboard SupportITX / M-ATX
Case MaterialStalinite
Fan SupportTop: 2x 120/140mm fan, Rear: 2x 120mm Fan
Graphics Card Length Limit360mm
Front I/O Ports1x USB 3.0, 1x USB Type-C (20PIN), Audio Jacks
PSU SupportATX (Length less than 165mm)
CPU Cooler Height Limit165mm
Drive Bays1x 3.5" HDD, 1x 2.5" SSD
Water Cooling Support240 / 280 / 360mm Radiators
Case Dimensions (W x D x H)251mm x 569mm x 535mm
Expansion Slots4
Gross Weight8.2KG

4. Setup and Installation

Before starting, ensure you have all necessary components and tools (screwdriver, zip ties, etc.). Refer to the exploded view for component placement.

Exploded view diagram of the Jonsbo MOD-3 Mini White PC case components

Figure 3: Exploded View of Case Components

4.1 Component Installation Order

  1. Motherboard: Install your ITX or M-ATX motherboard into the designated standoffs. Secure with screws.
  2. CPU Cooler: Install your CPU cooler. Ensure it does not exceed the 165mm height limit.
  3. Memory (RAM): Install RAM modules into the motherboard slots.
  4. Power Supply Unit (PSU): Install your ATX PSU. Ensure its length is less than 165mm.
  5. Storage Drives: Install one 3.5" HDD and/or one 2.5" SSD into the dedicated drive bays.
  6. Graphics Card (GPU): Install your graphics card into the PCIe slot. The case supports GPUs up to 360mm in length.
  7. Fans/Radiators: Install additional cooling fans (2x 120/140mm at top, 2x 120mm at rear) or liquid cooling radiators (240/280/360mm) as desired.

4.2 Cable Management

Utilize the cable routing options and tie-down points behind the motherboard tray to manage cables effectively. This improves airflow and aesthetics.

4.3 Front Panel Connections

Connect the front panel cables (Power, Reset, USB 3.0, USB Type-C, Audio) to their respective headers on your motherboard. Refer to your motherboard manual for exact header locations.

5. Operation

Once all components are installed and connected, close the side panels. Connect your monitor, keyboard, mouse, and power cable to the system. Press the power button on the front panel to start your PC.

The case supports RGB lighting (implied by product name). If your components or fans include RGB, ensure they are properly connected to your motherboard's RGB headers or a dedicated controller for customization.

6. Maintenance

  • Dust Cleaning: Regularly clean dust from the case, especially from fan filters and internal components, to maintain optimal airflow and cooling performance. Use compressed air or a soft brush.
  • Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid harsh chemicals that may damage the finish or clear panels.
  • Cable Check: Periodically check internal cable connections to ensure they are secure and not obstructing airflow.

7. Troubleshooting

  • PC Not Powering On: Double-check all power connections, including the PSU to the wall, PSU to motherboard, and front panel power switch cable to the motherboard.
  • Fans Not Spinning: Ensure all fan cables are correctly connected to the motherboard or fan controller. Check BIOS settings for fan control.
  • USB Ports Not Working: Verify that the front panel USB cables are securely connected to the motherboard's USB headers.
  • No Display Output: Ensure your graphics card is properly seated and connected to power. Check monitor connections.

8. User Tips

  • Plan Your Build: Due to the unique design, plan your component layout, especially for larger GPUs and liquid cooling, before installation.
  • Airflow Optimization: Consider the direction of your fans to create an optimal airflow path (e.g., intake from bottom/front, exhaust from top/rear).
  • RGB Synchronization: If using multiple RGB components, ensure they are compatible with a single control software (e.g., motherboard software) for synchronized lighting effects.

9. Warranty and Support

For warranty information, please refer to the documentation provided by your retailer or the manufacturer's official website. If you encounter any issues or require technical assistance, please contact the seller or Jonsbo customer support.

This product is covered by a free returns policy within 90 days. Your security and privacy are protected; personal details are not shared with third parties without consent, and secure payments are ensured.

© 2024 Jonsbo. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.