1. Introduction
Thank you for choosing the Skydroid S12-8G Drone Detector. This handheld device is designed for efficient and accurate detection of unmanned aerial vehicles (UAVs) across a wide frequency spectrum. With its advanced features and portable design, it serves as a crucial tool for safeguarding airspace and enhancing security. This manual provides essential information for the proper setup, operation, and maintenance of your S12-8G detector.
2. Product Overview
2.1. Package Contents
Upon unpacking, please ensure all the following items are present:
- Skydroid S12-8G Drone Detector Unit
- Detachable Antennas (2 units)
- Type-C Charging Cable
- User Manual (this document)
2.2. Key Features
- Ultra-Wide Detection Range: The S12-8G boasts an ultra-wide detection range of 0-8GHz, capable of accurately identifying and distinguishing various frequency bands of drones.
- Ultra-Long-Range Detection and Identification: Utilizing the latest wireless technology, the device can detect drones from 3 to 5 kilometers away under ideal conditions, with accurate identification of drone types.
- Frequency Band Selection and Filtering: Users can enable/disable specific frequency bands for detection, modify band range values, and filter out interference from certain bands (e.g., walkie-talkie frequencies), offering practical flexibility in configuration.
- Compact and Portable: Weighing only 180g, the S12-8G allows for easy single-handed grip and comes with a detachable clip, enhancing portability for outdoor use.
- Sound and Vibration Modes: The alarm supports switching between sound and vibration modes. Sound mode emits audible alerts. The intensity and speed of the sound may vary with signal strength. Vibration mode provides tactile alerts through high-frequency vibrations, ideal for discreet operation or noisy environments.
- 15-Hour Long Battery Life: Equipped with a 6000mAh battery, the device offers approximately 15 hours of continuous operation. It features a Type-C charging interface for convenient and fast charging.
- Multi-language Support: Supports Russian and English interfaces.
3. Specifications
The following table details the technical specifications of the Skydroid S12-8G Drone Detector:
| Parameter | Value |
|---|---|
| Display screen | 1.5 inches |
| Size | 59*40*298mm |
| Battery | 6000mAh |
| Antenna | 0-8GHz |
| Charging interface | TYPE-C |
| Power consumption | 0.8W |
| Weight | 180g |
| Battery life | approximately 15 hours |
| Working temperature | -10°C~55°C |
| Detection distance | 3~5km |
4. Setup
4.1. Charging the Battery
- Locate the Type-C charging port on the device.
- Connect the provided Type-C charging cable to the device and a compatible USB power source (e.g., wall adapter, computer USB port).
- The device's display will indicate charging status. Ensure the battery is fully charged before first use for optimal performance.
4.2. Attaching the Antennas
- Carefully screw the two detachable antennas into their respective ports on the top of the S12-8G unit.
- Ensure they are securely fastened but do not overtighten.
- For optimal detection, ensure antennas are fully extended and positioned vertically during operation.
4.3. Powering On/Off
- Power On: Press and hold the power button (usually located on the side or front panel) for a few seconds until the display illuminates.
- Power Off: Press and hold the power button again until the device powers down.
5. Operating Instructions
5.1. Basic Detection
Once powered on, the S12-8G will automatically begin scanning for drone signals. The display will show real-time information regarding detected frequencies and signal strength.
5.2. Alarm Modes (Sound & Vibration)
The device supports both sound and vibration alarms. Refer to the device's on-screen menu or dedicated buttons to switch between these modes:
- Sound Mode: Emits audible alerts. The intensity and speed of the sound may vary with signal strength.
- Vibration Mode: Provides tactile alerts through high-frequency vibrations, ideal for discreet operation or noisy environments.
5.3. Frequency Band Management
The S12-8G allows for advanced management of detection frequencies:
- Navigate to the "Frequency Settings" or "Band Management" menu on the device.
- From here, you can:
- Enable or disable specific frequency bands (e.g., 2.4GHz, 5.8GHz).
- Adjust the detection range within a band.
- Filter out known interference sources to reduce false alarms.
5.4. Language Selection
The device supports Russian and English. To change the display language:
- Access the "System Settings" or "Language" menu.
- Select your preferred language from the available options.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
- Antennas: Handle antennas with care. Avoid bending or applying excessive force, which could damage them.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted. | Charge the device using the provided Type-C cable. |
| No drone detection. | Antennas not properly attached or damaged. Incorrect frequency settings. Drone out of range. | Ensure antennas are securely attached and extended. Check frequency band settings. Move closer to the suspected drone location. |
| Short battery life. | Battery not fully charged. Old battery. Extreme operating temperatures. | Ensure full charge. If battery is old, consider replacement (contact support). Operate within recommended temperature range. |
| False alarms. | Interference from other devices. Overly sensitive settings. | Adjust frequency filtering settings to exclude known interference sources. Reduce sensitivity if adjustable. |
8. User Tips
Based on available information, no specific user tips from reviews or Q&A were provided. However, general best practices for drone detectors include:
- Always ensure antennas are correctly installed and oriented for optimal signal reception.
- Regularly check battery levels, especially before critical operations.
- Familiarize yourself with the frequency filtering options to minimize false positives in environments with other wireless devices.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.
