FGHGF ZL190PLUS

Contents

FGHGF ZL190PLUS High Precision Handheld GPS Land Meter

User Manual

1. Introduction

The FGHGF ZL190PLUS is a high-precision handheld GPS land meter designed for efficient and accurate surveying of various terrains, including farmland, gardens, parking lots, mountains, and mining areas. It supports multiple global satellite systems (GPS, BEIDOU, GLONASS, QZSS) for strong signal reception and minimal measurement errors.

Equipped with a 3.2-inch TFT backlit display, the device ensures measurements are easily readable in diverse lighting conditions. Its durable, portable design features IP67 waterproofing and dust-proof functionality, making it suitable for outdoor use. The ZL190PLUS offers various measurement modes, including 'Collect Point Area' and 'Auto-track Area', and can measure distance and slope in addition to area.

2. Package Contents

Please check the package for the following items:

  • 1 x Handheld GPS Land Meter (ZL190PLUS)
  • 1 x USB Cable
  • 1 x Lanyard
  • 1 x English Instruction Manual

3. Specifications

FeatureDescription
Brand NameFGHGF
ModelZL190PLUS
OriginMainland China
ColorBlack
Display3.2 inch TFT backlit display
Satellite SystemsGPS + BEIDOU + GLONASS + QZSS
Area Measurement Error< 0.002 acres
Distance Measurement Error< 5 ft
Horizontal Accuracy FactorThe smaller the value, the higher the precision.
Battery4000mAh Li-ion Rechargeable Battery
Charging Time2 Hours (Fast Charge)
Operating TimeUp to 24 hours
Waterproof RatingIP67 (strong dust-proof function)
MaterialPlastic

4. Setup

4.1 Initial Power On

To power on the device, long press the Power button. To power off, long press the Power button again.

4.2 Satellite Signal Acquisition

Before starting any measurement, ensure the device is in an outdoor open area to search for satellite signals. Begin measuring only when the accuracy value displayed on the screen is below 1 meter. The device's satellite signal strength ranges from 0 (no positioning) to 5 (excellent positioning). It is recommended to start measurements when the signal reaches level 3 or higher for optimal accuracy.

4.3 Basic Settings

Press the Setting button to configure various parameters:

  • Unit price
  • Slope
  • Area unit
  • Length unit
  • LCD brightness
  • Time (UTC)
  • Measurement methods
  • Factory reset

Use the Plus and Minus buttons to increase or decrease screen brightness, respectively.

Diagram of ZL190PLUS device controls and display information
Figure 1: Device Controls and Display Information. This diagram illustrates the functions of the OK, Minus, Setting, Record, Measure, Plus, Back, and Power buttons, along with information on Satellite Signal Strength and Horizontal Accuracy Factor.

5. Operating Instructions

5.1 Measurement Modes

The ZL190PLUS supports multiple measurement modes for various applications:

  • Collect Point Area: Suitable for measuring smaller, well-defined areas by marking specific points.
  • Auto-track Area: Ideal for larger or irregularly shaped areas. Simply walk around the perimeter of the desired area, and the device will automatically track and calculate the area.
Comparison of Collect-Poi Area and Auto-track Area measurement methods
Figure 2: Collect-Poi Area vs. Auto-track Area. This image demonstrates the application of different measurement modes for varying land sizes and shapes.

5.2 Performing a Measurement

  1. Ensure you have a strong satellite signal (level 3 or higher) in an open outdoor area.
  2. Press the Measure button to enter the measurement interface.
  3. Select the appropriate measurement method (e.g., Collect Point Area, Auto-track Area) from the settings.
  4. Press the OK button to start the measurement.
  5. For 'Auto-track Area', walk along the perimeter of the area you wish to measure. For 'Collect Point Area', follow the on-screen prompts to mark points.
  6. Press the OK button again to end the measurement. The calculated area, track, and distance will be displayed.
Example of precise and efficient 19-acre land measurement with the GPS meter
Figure 3: Precise and Efficient Measurement. This image illustrates the ZL190PLUS measuring a 19-acre field, highlighting its efficiency compared to traditional methods.

5.3 Reviewing and Exporting Data

Press the Record button to review previously recorded measurements or to export the recorded data. The device supports data export, allowing you to transfer your measurement results for further analysis.

Battery life and data export features of the ZL190PLUS
Figure 4: Battery and Data Features. This image highlights the 24-hour usage time, 4000mAh Li-ion rechargeable battery, 2-hour fast charge capability, and data export function.

6. Maintenance

6.1 Charging the Battery

The ZL190PLUS is equipped with a 4000mAh Li-ion rechargeable battery, providing up to 24 hours of usage time. Use the provided USB cable to charge the device. A full fast charge takes approximately 2 hours.

6.2 Cleaning and Storage

  • Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ensure the USB port cover is securely closed to maintain IP67 water and dust resistance.

7. Troubleshooting

7.1 Inaccurate Measurements

  • Weak Satellite Signal: Ensure you are in an open outdoor area with a clear view of the sky. The device requires a satellite signal strength of level 3 or higher for accurate measurements.
  • Starting Measurement Too Soon: Always wait until the accuracy value displayed on the screen is below 1 meter before initiating a measurement.
  • Environmental Factors: Dense foliage, tall buildings, or severe weather conditions can interfere with GPS signals. Try moving to a more open location.

7.2 Device Not Powering On

  • Low Battery: Connect the device to a power source using the provided USB cable and allow it to charge for at least 30 minutes before attempting to power on again.
  • Power Button Issue: Ensure you are long-pressing the Power button correctly.

7.3 Screen Readability Issues

  • Low Brightness: Use the Plus button to increase screen brightness.
  • Direct Sunlight: While the screen is backlit, extreme direct sunlight can still affect visibility. Try to shade the screen if possible.

8. User Tips

  • For optimal accuracy, always ensure a clear line of sight to the sky when operating the GPS land meter.
  • Before undertaking critical measurements, it is advisable to perform a small test measurement in a known area to verify the device's accuracy and your chosen settings.
  • Regularly export your recorded data to a computer or other storage device to prevent accidental loss.
  • Familiarize yourself with the different measurement modes (Collect Point Area, Auto-track Area) to select the most appropriate one for your specific surveying needs.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official FGHGF website. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.