Introduction
Thank you for choosing the SANDA 6196 Electronic Watch. This multi-functional digital watch is designed for sports enthusiasts and daily wear, featuring a durable construction, water resistance, and various useful functions. This manual provides detailed instructions to help you get the most out of your watch.
Figure 1: SANDA 6196 Electronic Watch (Black)
Button Functions
Figure 2: Watch Button Functions
- LIGHT Button (Top Left): Activates the backlight for illumination in low-light conditions.
- MODE Button (Bottom Left): Cycles through different functions (Time, Alarm, Stopwatch, Dual Time).
- START Button (Top Right): Used to start/pause functions (e.g., stopwatch) and increment values during settings.
- RESET Button (Bottom Right): Used to reset functions (e.g., stopwatch) and enter/exit setting modes (long press).
Setup Instructions
Setting Time and Date
- In normal time display mode, press and hold the RESET button until the seconds start flashing. This indicates you are in setting mode.
- Press the MODE button to cycle through the settings: Seconds → Hours → Minutes → Year → Month → Day.
- Use the START button to adjust the flashing value.
- Once all settings are adjusted, press the RESET button again to exit the setting mode.
12/24 Hour System
While setting the hours, pressing the START button will toggle between 12-hour and 24-hour display formats.
Operating Instructions
Using the Backlight
Press the LIGHT button (top left) to illuminate the display. The backlight will remain on for a few seconds.
Figure 3: Watch with Backlight Activated
Stopwatch Function (Chronograph)
- Press the MODE button repeatedly until you reach the stopwatch mode (indicated by 'CHRONO' or similar on the display).
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to clear the stopwatch to zero.
Alarm Clock
- Press the MODE button repeatedly until you reach the alarm mode.
- Press and hold the RESET button until the alarm hours start flashing.
- Use the START button to adjust the alarm hours.
- Press the MODE button to switch to alarm minutes and adjust with the START button.
- Press the RESET button to exit alarm setting mode.
- To turn the alarm ON/OFF, in alarm mode, press the START button. An alarm icon will appear/disappear.
Dual Time (Second Time Display)
The watch supports a second time display function. Navigate to this mode using the MODE button. The setting procedure is similar to the main time setting.
Water Resistance (50M)
The SANDA 6196 watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for:
- Washing hands
- Cold showers
- Being exposed to rain
Important: Do not press any buttons while the watch is wet or submerged. Not suitable for hot water activities, diving, or prolonged submersion.
Figure 4: Water Resistance Demonstration
Product Demonstration Video
Video 1: SANDA 6196 Watch Features and Operation Overview
Maintenance
- Cleaning: Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
- Avoid Chemicals: Do not expose the watch to strong chemicals, solvents, or detergents, as these can damage the case, strap, or internal components.
- Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and display performance.
- Battery Replacement: When the battery runs low, the display may become dim or functions may malfunction. It is recommended to have the battery replaced by a qualified watch technician to ensure water resistance is maintained.
Troubleshooting
- Display is blank or dim: Check if the battery is low. If the watch is old, the battery may need replacement.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a feature on this model). Try pressing buttons firmly. If still unresponsive, a soft reset (removing and reinserting the battery, if comfortable doing so, or seeking professional help) might be needed.
- Time is inaccurate: Re-set the time and date following the 'Setting Time and Date' instructions. If the inaccuracy persists, the watch may require servicing.
- Alarm not sounding: Ensure the alarm is set correctly and the alarm icon is displayed, indicating it is active. Check the volume settings if applicable (this model has a standard beep alarm).
If you encounter persistent issues not covered here, please contact the seller or a professional watch repair service.
Specifications
Figure 5: SANDA 6196 Watch Specifications
| Feature | Specification |
|---|---|
| Brand Name | SANDA |
| Model Number | 6196 |
| Item Type | Digital Wristwatches |
| Movement | Digital |
| Display Type | DIGITAL / Analog-Digital |
| Case Material | Resin |
| Case Shape | Rectangle |
| Case Thickness | 13mm |
| Case Diameter | 40mm |
| Case Height | 42.5mm |
| Dial Window Material Type | Hardlex |
| Band Material Type | Silicone |
| Band Type | Sport Band |
| Band Width | 18-24mm |
| Band Length | 25cm |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50 meters) |
| Features | Back Light, Shock Resistant, LED Display, Repeater, Chronograph, DIVER, Alarm |
| Battery Included | Yes (Maxell original battery) |
| Weight | 39g |
| Origin | Mainland China |
| Certification | CE |
User Tips
- Regular Use: For optimal battery life, avoid excessive use of the backlight.
- Button Feel: The buttons are designed to be firm to prevent accidental presses, especially during sports activities.
- Time Synchronization: Periodically check and synchronize your watch's time with a reliable source to ensure accuracy.
Warranty and Support
For warranty information, please refer to the terms and conditions provided by your original point of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
If you require technical support or have questions about your SANDA 6196 watch, please reach out to the seller or manufacturer's customer service channels.