1. Introduction
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Santos Large Format Inkjet Printer. Designed for commercial applications, this printer offers high-quality, high-speed printing for various media types. It features advanced technologies for precise control, efficient movement, automatic cleaning, and reliable ink supply.
The Santos printer is available in 1.6m and 1.8m widths, utilizing Epson XP600, i1600, or i3200 print heads for resolutions up to 1440dpi (3200dpi with i3200 head).

2. Key Features
- New type and high-quality 4-color (CMYK) printing, with options for 6 or 8 colors (CMYK LM LC / CMYK LMLC LLK).
- Max resolution up to 1440dpi (3200dpi with i3200 print head).
- Upgraded and advanced technologies in printer control, movement, auto clean & protect, and ink supply systems.
- Elegant appearance and simple structure for convenient operation and easy maintenance.
- Hiwin branded guide rail and high-quality motors ensure stable operation and lower noise.
- Printhead is adjustable to accommodate various media thicknesses.
- Control program built into Maintop RIP software for easy operation and high compatibility.
- Error code hints system for quick problem identification.
3. Setup Instructions
Proper installation is crucial for optimal performance. It is recommended to have professional assistance for initial setup.
3.1 Unpacking and Placement
- Carefully unpack the printer and its components.
- Place the printer on a stable, level surface in an environment with a temperature range of 15°C-30°C and relative humidity of 40-60%.
- Ensure adequate space around the printer for operation and maintenance.
3.2 Component Overview


3.3 Power Connection
Connect the printer to a single-phase 110V/220V, 50Hz/60Hz power supply.
3.4 Software Installation
Install the Maintop RIP software. ONYX/Photoprint are optional RIP software choices. Refer to the dedicated software installation video for detailed steps.

3.5 Ink Loading
Fill the 1500ml ink tanks with compatible Eco-solvent, water-based, or sublimation ink for each color (CMYK, or CMYK LM LC, CMYK LMLC LLK depending on model).
3.6 Media Loading
Load the roll media onto the standard media loading and take-up system. Ensure the media is properly aligned for accurate feeding.
4. Operating Instructions
4.1 Preparing a Print Job
- Design or prepare your print file using appropriate graphic software.
- Import the file into the Maintop RIP software (or ONYX/Photoprint).
- Configure print settings such as resolution (e.g., 1440dpi, 3200dpi), color profile, and media type. Adjust printhead height if necessary for media thickness.
4.2 Starting the Print Process
- Ensure the printer is powered on and connected via Gigabit Ethernet.
- Verify that sufficient ink is available in all tanks.
- Confirm the media is correctly loaded and tensioned.
- Initiate the print job from the RIP software.
4.3 Monitoring Printing
Monitor the printing process for any issues. The printer features an intelligent head protector that automatically stops if material warping is detected. The heating system (inside automatic smart micro control heating system and infrared drying system with fans) ensures proper ink curing.
4.4 Compatible Media Types
The printer supports a wide range of media:
- Water-based materials: PP, Bakelit film, Photo paper, Movable self-adhesive vinyl, Pictorial cloth, Sublimation Transfer Paper.
- Eco-solvent materials: Car sticker, Lamp cloth, Face film, Coated banner, Flag cloth.
- Printings: Thermal transfer paper, Pure cotton.
- Special materials: Wall paper, Canvas, Chinese art paper, Grid cloth.
5. Maintenance
Regular maintenance ensures the longevity and consistent performance of your printer.
- Automatic Cleaning System: The printer is equipped with an automatic cleaning system. Ensure it is functioning correctly and perform routine checks as per the software instructions.
- Print Head Protection: The intelligent head protector helps prevent damage. Keep the print area clear of obstructions.
- General Cleaning: Regularly clean the exterior of the printer and the media path to prevent dust and debris accumulation.
- Ink System: Monitor ink levels and refill tanks promptly to avoid air entering the system.
6. Troubleshooting
This section provides guidance on common issues. For complex problems, refer to the error code hints system or contact technical support.
- Print Quality Issues: If prints show banding, color shifts, or missing nozzles, perform a nozzle check and head cleaning cycle through the RIP software. Ensure correct media profiles are selected.
- Media Feeding Problems: Check for proper media loading and tension. Ensure the thickened paper feed shaft is clean and free of debris.
- Printer Not Responding: Verify power connections and Ethernet cable connection. Restart the printer and computer.
- Error Codes: The printer's control system provides error code hints. Consult the software manual or technical support with the specific code for diagnosis.
7. Specifications
| Feature | ST-1601/1602 | ST-1801/1802 |
|---|---|---|
| Print Head | Epson XP600 / DX5 / i1600 / i3200 | |
| Print Head Number | 1 / 2 | |
| Print Resolution | 1440dpi (i3200 head: 3200 dpi) | |
| Feeding Width | 1620mm | 1890mm |
| Print Width | 1600mm | 1850mm |
| Print Speed (Production 4 Pass) | 24sqm/h (one i3200 head speed) | 42sqm/h (two i3200 heads) |
| Print Speed (Precision 6 Pass) | 16.8sqm/h (one i3200 head speed) | 32.8sqm/h (two i3200 heads) |
| Ink Type | Eco solvent ink / water-based ink / Sublimation ink / UV ink | |
| Color | CMYK 4 Colors / CMYK LM LC 6 Colors / CMYK LMLC LLK 8 Colors | |
| Ink Tank Volume | 1500ml tank for each color | |
| Supply Type | Negative Pressure CISS | |
| Print Media | PP self-adhesive vinyl, Bakelit film, Photo paper, Movable PP self-adhesive vinyl, Pictorial cloth, Sublimation Transfer Paper, Car sticker, Lamp cloth, Face film, Coated banner, Flag cloth, Thermal transfer paper, Pure cotton, Wall paper, Canvas, Chinese art paper, Grid cloth | |
| Heating System | Inside automatic smart micro control heating system | |
| Drying System | Infrared heating system with fans | |
| Media Loading & Take up System | Standard | |
| Cleaning System | Automatic cleaning | |
| Data Transmission | Gigabit Ethernet port | |
| Software | Maintop / Photoprint (optional) | |
| Power Supply | Single Phase 110V/220V, 50Hz/60Hz | |
| Operating Temperature | 15°C - 30°C | |
| Relative Humidity | 40-60% | |
| Power Consumption | Min: 32W, Max: 2300W | |
| Package Size | 230kg / 2850*766*665mm | 270kg / 2950*766*665mm |
8. User Tips
- For Fine Details: When printing small graphics or text (e.g., 1mm text on stickers), ensure you select the highest possible print resolution in your RIP software and use media optimized for fine detail printing.
- Media Compatibility: Always verify that your chosen media is compatible with the ink type (Eco-solvent, water-based, sublimation, UV) being used to prevent print quality issues and potential damage to the print heads.
- Regular Cleaning: Utilize the automatic cleaning system regularly to maintain print head health and prevent clogs.
- Environmental Control: Maintain the recommended operating temperature and humidity to ensure stable printing performance and ink consistency.
9. Warranty and Support
Your Santos Large Format Inkjet Printer comes with comprehensive support:
- Warranty: One-year warranty for the mainboard and head board.
- Technical Service: Lifetime technical service is provided to assist with any operational or technical queries.
- Installation Support: Access to printer installation videos and software installation videos. Remote installation assistance is also available for safety and convenience.
For support, please refer to the contact information provided by your seller or the manufacturer.