1. Introduction
This manual provides instructions for the FGHGF SI4732 Modified Radio and Bluetooth Stereo Transmitter Module, an upgrade designed for Quansheng UV-K5 and UV-K6 intercom radios. This module enhances your radio's capabilities by adding Bluetooth stereo transmission and support for multi-system operating software, significantly improving its versatility and playability.
2. Package Contents
- 1 x SI4732 Module Kit (includes main PCB, 2x2M expansion chip, and associated components)
Note: The Quansheng UV-K5 or UV-K6 radio is not included and must be purchased separately.

Figure 1: Contents of the SI4732 Module Kit, showing the main PCB and various components.
3. Setup and Installation
Installation of this module requires technical proficiency and careful handling of electronic components. It involves opening your Quansheng UV-K5 or UV-K6 radio and connecting the module to its internal circuitry. If you are not comfortable with such modifications, it is recommended to seek professional assistance.
3.1 Installation Steps (General Guide)
- Prepare your radio: Ensure your Quansheng UV-K5 or UV-K6 radio is powered off and the battery is removed.
- Open the radio casing: Carefully open the radio's casing to access its internal mainboard.
- Locate connection points: Identify the designated connection points on the radio's mainboard for the SI4732 module. These typically include power, data, and antenna interfaces.
- Connect the module: Securely connect the SI4732 module to the radio's mainboard. This may involve soldering or using existing connectors, depending on the specific radio model and module design. Pay close attention to the antenna interface connection.
- Install expansion chip: The 2x2M expansion chip should be installed as per the specific instructions for flashing multi-system operating software.
- Secure the module: Ensure the module is securely placed within the radio casing to prevent movement or short circuits.
- Close the casing: Carefully reassemble the radio casing.

Figure 2: Diagram illustrating the connection points of the SI4732 module to the Quansheng UV-K5/K6 radio's mainboard, highlighting the antenna interface and module placement.

Figure 3: The SI4732 module installed inside a Quansheng UV-K5/K6 radio, showing internal wiring and connections.
4. Operating Instructions
4.1 Bluetooth Stereo Transmission
Once the SI4732 module is successfully installed, your Quansheng radio gains Bluetooth stereo transmission capabilities. This allows you to connect to external Bluetooth audio devices.
- Activate Bluetooth: Refer to your Quansheng UV-K5/K6 radio's updated firmware or menu options to activate the Bluetooth function.
- Pairing Mode: Put your desired Bluetooth audio device (e.g., speaker, headphones) into pairing mode.
- Connect: On your radio, search for available Bluetooth devices and select your audio device to pair and connect.
- Audio Output: Audio from the radio (e.g., FM radio, received transmissions) will now be transmitted to the connected Bluetooth device in stereo (FM-HiFi stereo transmission).

Figure 4: Illustration of a Quansheng K6 radio (with SI4732 module) connected to a Bluetooth speaker and Bluetooth headphones, demonstrating FM-HiFi stereo transmission.
4.2 Multi-System Software Support
The 2x2M expansion chip allows for flashing multi-system operating software. This feature enables advanced users to install different firmware versions or custom operating systems, similar to installing various OS on a PC. Consult community resources or the module manufacturer's documentation for specific instructions on flashing and compatible software.
5. Maintenance
The SI4732 module is an internal component and generally requires no routine maintenance. To ensure its longevity and proper function:
- Avoid exposing your radio to extreme temperatures, moisture, or dust.
- Do not attempt to modify the module itself.
- If the radio requires servicing, ensure it is performed by qualified personnel to avoid damaging the module or other components.
6. Troubleshooting
- No Bluetooth connection: Ensure the module is correctly installed, Bluetooth is enabled on the radio, and your audio device is in pairing mode and within range. Try restarting both devices.
- No audio output: Check the volume levels on both the radio and the connected Bluetooth device. Ensure the Bluetooth connection is stable.
- Module not recognized: Verify all internal connections are secure. If issues persist, re-check the installation steps or consult the seller for support.
- Software flashing issues: Ensure you are using compatible software and following the flashing instructions precisely. Incorrect flashing can lead to device malfunction.
7. Specifications
| Feature | Description |
|---|---|
| Brand Name | FGHGF |
| Origin | Mainland China |
| Model Name | SI4732 Modified Module |
| Key Functionality | SI4732 Bluetooth Modified Module, SI4732 Module with Bluetooth |
| Compatibility | For Quansheng UV K5 K6 |
| Expansion Chip | 2x2M (4M total) for multi-system software support |
| Material | PCB |
| Package Weight | 0.017 kg |
| Package Dimensions | 10cm x 8cm x 1cm |
8. User Tips
- Firmware Updates: Regularly check for updated firmware for your Quansheng radio, as these may include enhancements or bug fixes related to module compatibility.
- Community Support: For advanced modifications or multi-system software, engage with online communities dedicated to Quansheng radios. They often share valuable insights and custom firmware.
- Static Discharge: When installing the module, take precautions against static electricity to protect sensitive electronic components.
9. Warranty and Support
For any questions regarding the installation, operation, or troubleshooting of your SI4732 module, please contact the seller or manufacturer directly. Keep your purchase records for any potential warranty claims.