SANDA 3008 Dual Display Sport Watch User Manual

1. Introduction

Thank you for choosing the SANDA 3008 Dual Display Sport Watch. This manual provides essential information for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and longevity of your timepiece.

2. Safety Information and Precautions

• **Water Resistance:** The watch is rated for 50 meters (5ATM) water resistance, suitable for washing hands, washing face, and cold baths. It is NOT suitable for hot water, warm water bathing, or showering, as water vapor can enter the watch.
• **Chemical Exposure:** Do not expose the watch to chemical-containing cosmetics or corrosive daily necessities. These substances can corrode the plating and finish of the watch surface.
• **Impact:** The watch is shock resistant, but excessive force or impact should be avoided to prevent damage.
• **Temperature Extremes:** Avoid exposing the watch to extreme temperatures (very hot or very cold) for prolonged periods.

3. Product Overview

3.1 Key Features

• Analog-Digital Dual Display
• LED Display with Luminous Effect (Night Vision Cold Light)
• Shock Resistant
• Chronograph (Stopwatch)
• Alarm Clock Mode
• Complete Calendar (Week Display, Date Display)
• Multiple Time Zone
• 50 Meters Water Resistance (5ATM)
• Resin Strap for comfort and durability
• High Hardness Mineral Tempered Glass Mirror
• Stainless Steel Bottom Cover

3.2 Components

4. Setup and Operating Instructions

Your SANDA 3008 watch features both analog and digital displays, offering multiple functions. Refer to the 'Function Introduction' diagram for button identification.

4.1 Setting the Analog Time

1. Pull out the crown (the adjustable knob on the side, typically on the right) to the first click position.
2. Turn the crown to adjust the hour and minute hands to the desired time.
3. Push the crown back in to secure the time.

4.2 Setting the Digital Time, Date, and Week

The digital display offers various modes including time, date, week, alarm, and stopwatch. Use the 'Button to convert mode' (typically bottom-left) to cycle through modes.

1. **Enter Setting Mode:** In the normal time display mode, press and hold the 'Noctilucent light/Added value button' (typically top-left) until the digits start flashing.
2. **Adjust Values:** Use the 'Stop watch reset button' (typically bottom-right) to increase the flashing value.
3. **Select Item to Adjust:** Use the 'Button to convert mode' (typically bottom-left) to move between hours, minutes, 12/24-hour format, month, date, and day of the week.
4. **Confirm Settings:** Once all settings are adjusted, press the 'Noctilucent light/Added value button' (top-left) again to exit the setting mode.

4.3 Using the Alarm Clock Mode

1. Cycle to the Alarm mode using the 'Button to convert mode'.
2. Press and hold the 'Noctilucent light/Added value button' until the alarm time digits flash.
3. Adjust the alarm hour and minute using the 'Stop watch reset button' and cycle between them with the 'Button to convert mode'.
4. Press the 'Noctilucent light/Added value button' to confirm.
5. To activate/deactivate the alarm, briefly press the 'Noctilucent light/Added value button' in alarm mode. An alarm icon will appear/disappear.

4.4 Using the Chronograph (Stopwatch)

1. Cycle to the Stopwatch mode using the 'Button to convert mode'.
2. Press the 'Stop watch reset button' to start the stopwatch.
3. Press the 'Stop watch reset button' again to pause/resume.
4. To reset, press the 'Noctilucent light/Added value button' while the stopwatch is paused.

4.5 Activating Luminous Display

Press the 'Noctilucent light/Added value button' (top-left) briefly to activate the LED backlight for improved visibility in low-light conditions. This feature is referred to as 'Night Vision Cold Light'.

5. Maintenance

5.1 Cleaning

Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Avoid using harsh chemicals or abrasive materials.

5.2 Water Resistance Care

While your watch is water resistant to 50 meters, it is crucial to adhere to the following:

• Do not operate any buttons or the crown while the watch is wet or submerged.
• Avoid exposure to hot water, steam, or sudden temperature changes, as this can compromise the seals.
• If the watch is exposed to saltwater, rinse it with fresh water and dry thoroughly.

5.3 Battery Replacement

The watch uses a MAXELL Japan original battery (CR2016). When the digital display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.

6. Troubleshooting

• **Digital Display Blank/Dim:** The battery may be low. Replace the battery.
• **Incorrect Time/Date:** Re-adjust the time and date settings as per Section 4.2.
• **Water Inside Watch:** If condensation or water appears inside the watch, stop using it immediately and seek professional service. This indicates a compromised water seal.
• **Buttons Not Responding:** Ensure the watch is dry. If the issue persists, contact customer service.

7. Specifications

8. User Tips

• **Initial Setup:** Take your time when setting the digital display. If you encounter difficulties, refer to Section 4.2 or contact customer service for assistance.
• **Water Exposure:** Always remember the distinction between cold water resistance and hot water vulnerability. Avoid steam rooms or hot showers with the watch on.
• **Strap Comfort:** The resin strap is designed for comfort. Ensure it's not too tight or too loose for optimal wear.
• **Battery Life:** To maximize battery life, avoid excessive use of the LED backlight.

9. Warranty and Support

For any questions regarding the operation, maintenance, or troubleshooting of your SANDA 3008 watch, please contact the seller's customer service. They can provide detailed guidance and support.

Please note that the watch does not come with a retail box unless specified at the time of purchase.