1. Introduction
Thank you for choosing the ETENWOLF ZEPHYR S3C Portable Air Compressor. This device is a versatile and powerful tool designed for inflating tires on cars, SUVs, motorcycles, and bicycles, as well as sports equipment like basketballs and swimming laps. Featuring a 7800mAh battery, 160 PSI maximum pressure, and a 100% duty cycle, it ensures efficient and continuous inflation. This manual provides essential information for safe and effective use, maintenance, and troubleshooting.
2. Package Contents
Please check the package carefully to ensure all items are present:
- ETENWOLF ZEPHYR S3C Portable Air Compressor x1
- User Manual x1
- USB A to C Charging Cable x1
- 15W Charger x1
- Pressure Hose x1
- T-shaped Quick Connector (Air Chuck) x1
- Presta Valve Adapter (French Copper Adapter) x1
- Ball Needle (Inflation Needle) x1
- High-Pressure Tapered Nozzle (Cone Shaped Blowing Nozzle) x1
3. Setup
3.1 Charging the Device
Before first use, fully charge the air compressor. Connect the provided USB A to C charging cable to the 15W charger and plug it into a power outlet. Connect the USB-C end to the charging port on the air compressor. The display will indicate charging status. A full charge ensures optimal performance and standby time.
3.2 Attaching the Inflation Hose and Nozzles
- Screw the pressure hose securely onto the air compressor's output port.
- Select the appropriate nozzle for your item (e.g., T-shaped quick connector for car tires, ball needle for sports balls, Presta valve adapter for specific bicycle valves, or high-pressure tapered nozzle for inflatables).
- Attach the selected nozzle to the free end of the pressure hose.
4. Operating Instructions
4.1 Power On/Off
To power on the device, long press the power button for three seconds. The display will light up. To power off, long press the power button again.
4.2 Selecting Inflation Mode and Pressure Unit
- Press the 'MODE' button to cycle through the four output modes: Car, Bike, Balls, and Custom.
- Press the 'UNIT' button to switch between pressure units: BAR, PSI, and KPA.
- In 'Custom' mode, you can manually set the desired pressure using the '+' and '-' buttons.
4.3 Starting and Stopping Inflation
- Remove the valve cap from the item to be inflated and connect the appropriate nozzle.
- Long press the power button for three seconds to start the device.
- Press the 'MODE' button to select the desired inflation mode (Car, Bike, Balls, Custom).
- Adjust the target pressure using the '+' and '-' buttons if necessary.
- Press the start button (often indicated by a play/pause icon) to begin inflating. The device will automatically stop when the preset pressure is reached.
- To manually stop inflation, press the start button again.
4.4 LED Lighting Modes
The device features three LED modes for various situations:
- Illumination: Provides a steady light for visibility in dark conditions.
- Slow Strobe: A flashing light for signaling or attracting attention.
- SOS: A distress signal pattern (three short, three long, three short flashes).
4.5 Power Bank Function
The 7800mAh battery can also function as a power bank to charge other devices. Connect your device to the USB-A output port on the air compressor using a compatible charging cable.
5. Maintenance
5.1 Cleaning
Wipe the exterior of the air compressor with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is powered off and disconnected from any power source before cleaning.
5.2 Storage
Store the air compressor in a cool, dry place away from direct sunlight and extreme temperatures. The device is designed to be idle for up to a year without significant power loss, but it is recommended to periodically check the battery level and recharge if necessary to prolong battery life.
5.3 Cooling System
The ZEPHYR S3C features a built-in multi-blade rotating fan and external penetrating cooling air holes to dissipate heat quickly, ensuring uninterrupted inflation. Keep the air vents clear of obstructions to maintain optimal cooling performance.
6. Troubleshooting
The ETENWOLF ZEPHYR S3C is equipped with more than 8 integrated safety features to ensure secure operation. If you encounter any issues, please refer to the following:
6.1 Safety Protection Features
- AI-software protection: Intelligent monitoring to prevent operational errors.
- High-temperature protection: Automatically shuts off if internal temperature exceeds safe limits.
- Low-temperature protection: Ensures safe operation in cold environments.
- Over-charge protection: Prevents battery damage from excessive charging.
- Over-current protection: Safeguards against excessive electrical current.
- Over-voltage protection: Protects components from voltage spikes.
- Short-circuit protection: Prevents damage from electrical shorts.
- Over-load protection: Shuts down if the motor is overloaded.
6.2 Common Issues
- Device does not power on: Ensure the battery is charged. If not, connect to the charger.
- Inflation is slow or not starting: Check that the hose and nozzle are securely attached and there are no leaks. Verify the target pressure is set correctly and is higher than the current pressure.
- Device stops unexpectedly: This could be due to one of the built-in safety protections (e.g., high-temperature, over-load). Allow the device to cool down before attempting to use it again.
- Inaccurate pressure reading: Ensure the nozzle is firmly connected to the valve stem without air leakage.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | ZEPHYR S3C (also known as ZEPHYR S3SE) |
| Brand Name | ETENWOLF |
| Item Type | PUMPS |
| Material | Plastic |
| Battery Capacity | 7800mAh |
| Maximum Operating Pressure | 160 PSI (11 bar) |
| Inflation Speed | 22L/Min @ 0PSI (0.75CFM @ 0PSI) |
| Duty Cycle | 100% |
| Maximum Power | 132 W |
| Charging | 15W PD Fast Charging (USB A to C) |
| Output Modes | Car, Bike, Balls, Custom |
| Pressure Units | BAR, PSI, KPA |
| LED Modes | Illumination, Slow Strobe, SOS |
| Item Weight | 1.3kg |
| Item Dimensions (L x W x H) | 6.18inch x 4.8inch x 7.8inch (approx. 15.7cm x 12.2cm x 19.8cm) |
| Package Dimensions (L x W x H) | 19cm x 16cm x 12cm |
| Package Weight | 1.262kg |
| High-concerned chemical | None |
| Origin | Mainland China |
8. User Tips
- Pre-set Pressure: Always pre-set your desired pressure before starting inflation to avoid over-inflation and ensure safety.
- Check Battery: For optimal performance, ensure the device is adequately charged, especially before inflating multiple items or larger tires.
- Correct Nozzle: Using the correct nozzle for each item ensures an airtight seal and efficient inflation.
- Cool Down: While designed for 100% duty cycle, for very prolonged use or in hot environments, allowing brief cool-down periods can extend the device's lifespan.
- Hands-Free Operation: The 100% duty cycle allows for continuous inflation without needing to hold the device, providing convenience for larger tasks.
9. Warranty and Support
For any after-sales inquiries, technical support, or warranty claims, please contact our customer service team:
Email: support@etenwolf.com
We are committed to providing you with professional and efficient service.