AULA S6

Contents

AULA S6 Wireless Bluetooth Headphone User Manual

Model: S6 | Brand: AULA

Introduction

The AULA S6 is a versatile tri-mode wireless headphone designed for gaming and general use with desktops and laptops. Featuring an ultra-lightweight design, long battery life, and an embedded beamforming microphone, it offers seamless connectivity via 2.4G wireless, Bluetooth 5.3, or a wired connection. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your AULA S6 headphones.

Package Contents

Please check the box for the following items:

  • AULA S6 Headphones (1)
  • 2.4G Wireless Transmitter (1)
  • USB Type-C Charging Cable (1)
  • 3.5mm Audio Cable (1)
  • User Manual (This document)

Specifications

Feature Specification
Product NameAULA S6
Brand NameAULA
ModelS6
CommunicationWireless (2.4G, Bluetooth) + Wired (3.5mm)
Bluetooth Version5.3
Wireless Range≤ 10m
Frequency Response Range20Hz-20KHz
Speaker Diameter40mm
Speaker Impedance30 Ω ±15% at 1KHz (DC)
Speaker Sensitivity121dB at 1kHz 1mW
Rated Power10mW
Maximum Input Power20mW
Microphone TypeEmbedded Beamforming, Omni-directional
Microphone Size40*15mm
Microphone Sensitivity-38 ±2dB
Microphone Frequency Range100Hz-8KHz
Microphone Operating Voltage Range1.1-10V
Microphone Current Consumption100-500uA
Microphone Signal-to-Noise Ratio≥58dB
Microphone Impedance2.2KΩ ±30% at 1KHz
Battery Capacity260mAh
Battery LifeUp to 22 hours (approx.)
Charging Standard5V/500mA (Type-C)
WeightApprox. 180g (175±5g)
MaterialPlastic, Silica Gel, Manganese Steel, Football Cloth, Elastic Cotton, Mesh Fabric
Earcups TypeSealed
Number of Drivers2
FeaturesWith Microphone, Volume Control, Intelligent Noise Reduction, Lightning Game Mode
Audio CodecsAAC
WaterproofNo
CertificationsCE, FCC

Note: Colors are for reference only. Data comes from the brand's laboratory.

AULA S6 Headphone Product Dimensions
Figure 1: Product dimensions of the AULA S6 headphones (17.5cm width, 19.5cm height, 8cm earcup diameter).
AULA S6 Headphone and Microphone Specifications Table
Figure 2: Detailed specifications for the AULA S6 headphones and its microphone.

Setup

1. Charging the Headphones

Before first use, fully charge your AULA S6 headphones. Connect the supplied USB Type-C charging cable to the charging port on the left earcup and plug the other end into a 5V/500mA power source (e.g., computer USB port, wall adapter).

AULA S6 Headphone Button Layout and Type-C Charging Port
Figure 3: Location of the Type-C charging port on the left earcup.

2. Powering On/Off

To power on or off the headphones, locate the power switch on the left earcup and slide it to the desired position.

3. Connection Modes

The AULA S6 headphones support three connection modes: 2.4G Wireless, Bluetooth, and Wired.

3.1. 2.4G Wireless Connection (for PC/Laptop)

  1. Plug the 2.4G wireless transmitter into an available USB port on your computer.
  2. Ensure the headphones are powered on and switched to 2.4G mode (refer to the button zoning diagram for the mode switch).
  3. The headphones should automatically connect to the transmitter. A successful connection is usually indicated by a stable LED light on the headphones.
AULA S6 Headphone Features including 2.4G Wireless Dongle
Figure 4: Illustration of the 2.4G wireless dongle for ultra-low latency connection.

3.2. Bluetooth Connection (for Mobile Devices/Laptops)

  1. Ensure the headphones are powered on and switched to Bluetooth mode (refer to the button zoning diagram for the mode switch).
  2. On your device (smartphone, tablet, laptop), go to Bluetooth settings and enable Bluetooth.
  3. Search for available devices and select "AULA S6" from the list.
  4. Once paired, the headphones will indicate a successful connection.
AULA S6 Headphone compatible with multiple devices like tablets and smartphones
Figure 5: AULA S6 headphones demonstrating compatibility with various wireless-enabled devices.

3.3. Wired Connection (3.5mm Audio Cable)

For a wired connection, simply plug the 3.5mm audio cable into the headphone's audio jack and the other end into your device's 3.5mm audio port. This mode does not require battery power.

Operating Instructions

Button Functions

The physical buttons on the left earcup provide easy control over various functions:

  • Power Switch: Slide to turn the headphones on or off.
  • Mode Switch (BT/2.4G): Toggle between Bluetooth and 2.4G wireless modes.
  • Volume Control: Adjust the audio output level.
  • Call Management Button:
    • Press once to hang up/answer incoming calls.
    • Press and hold to reject incoming calls.
  • Microphone On/Off: Toggle the microphone function.
AULA S6 Headphone Button Zoning Diagram
Figure 6: Detailed diagram of button functions on the left earcup.

Microphone Features

The AULA S6 features an embedded beamforming microphone with intelligent noise cancellation. This technology focuses on your voice, detects sound from all directions, and filters out ambient noise for clear communication, especially during gaming or calls.

AULA S6 Headphone with Embedded Beamforming Microphone
Figure 7: Illustration of the embedded beamforming microphone technology.
AULA S6 Headphone Intelligent Call Noise Cancellation
Figure 8: Intelligent call noise cancellation for clear communication.

Lightning Game Mode

Activate Lightning Game Mode for an immersive audio experience with ultra-low latency (approx. 20ms). This mode is designed to give you a competitive edge in gaming by enhancing sound clarity and responsiveness, allowing you to react faster to in-game audio cues.

AULA S6 Headphone Lightning Game Mode
Figure 9: Lightning Game Mode for enhanced gaming audio.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in use for extended periods.
  • Avoid Water: The headphones are not waterproof. Avoid exposure to water or excessive moisture.

Troubleshooting

No Sound:
  • Ensure the headphones are powered on and charged.
  • Check the volume level on both the headphones and your connected device.
  • Verify the correct connection mode (2.4G, Bluetooth, or Wired) is selected and properly established.
  • If using 2.4G wireless, ensure the transmitter is securely plugged in.
  • If using Bluetooth, ensure the headphones are paired and connected to your device.
Cannot Pair via Bluetooth:
  • Make sure the headphones are in Bluetooth pairing mode.
  • Ensure Bluetooth is enabled on your device and it's within the effective range (≤ 10m).
  • Try turning off and on Bluetooth on your device, then re-attempt pairing.
  • If previously paired, try "forgetting" the device on your phone and pairing again.
Microphone Not Working:
  • Ensure the microphone is not muted via the button on the earcup.
  • Check your device's audio settings to ensure the AULA S6 microphone is selected as the input device.
Short Battery Life:
  • Ensure the headphones are fully charged before use.
  • Battery life can vary based on volume levels and usage patterns.

User Tips

  • Comfort for Long Sessions: The AULA S6's ultra-lightweight design (approx. 180g) and comfortable earcups make it ideal for extended gaming or work sessions.
  • Seamless Switching: Take advantage of the tri-mode connectivity to easily switch between your gaming PC (2.4G wireless), smartphone (Bluetooth), and other devices (wired) without needing multiple headsets.
  • Clear Communication: The embedded beamforming microphone with intelligent noise cancellation ensures your voice is heard clearly, even in noisy environments.
  • Gaming Advantage: Utilize the Lightning Game Mode for ultra-low latency audio, providing a competitive edge in fast-paced games.

Warranty and Support

AULA products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official AULA website or contact your retailer. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.