EDON MINI-300S

Contents

EDON MINI-300S Portable MMA 120A Welding Machine

Model: MINI-300S | Brand: EDON

1. Introduction

Thank you for choosing the EDON MINI-300S Portable MMA 120A Welding Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before use and keep it for future reference.

Front-side view of the EDON MINI-300S welding machine.

Figure 1: EDON MINI-300S Welding Machine

2. Safety Information

Welding can be dangerous. Always follow safety precautions to prevent injury or death. This section outlines general safety guidelines. Refer to local safety standards and regulations for comprehensive safety information.

2.1 Personal Protective Equipment (PPE)

  • Always wear a welding helmet with appropriate shade filter to protect eyes and face from arc rays and sparks.
  • Wear flame-resistant clothing, leather gloves, and safety shoes.
  • Protect bystanders with welding screens or curtains.

2.2 Work Area Safety

  • Ensure the work area is well-ventilated to avoid inhaling welding fumes.
  • Keep the work area clean and free of flammable materials.
  • Have a fire extinguisher readily available.
  • Do not weld in damp or wet conditions.

2.3 Electrical Safety

  • Ensure the welding machine is properly grounded.
  • Inspect cables and connections for damage before each use.
  • Do not touch live electrical parts.
  • Disconnect power before performing any maintenance or adjustments.

3. Product Overview

The EDON MINI-300S is a portable MMA (Manual Metal Arc) inverter welding machine designed for ease of use and reliable performance. It features IGBT technology for stable arc and efficient welding.

3.1 Components

  1. Front Panel: Current adjustment knob, indicator lights (power, overload/temperature).
  2. Rear Panel: Power input, cooling fan, ground terminal.
  3. Output Terminals: Positive (+) and Negative (-) terminals for welding cables.
  4. Handle/Strap: For portability.
Front panel of the EDON MINI-120 welding machine, showing current dial and indicator lights.

Figure 2: Front Panel (Example MINI-120)

Rear panel of the EDON MINI-120 welding machine, showing fan, power input, and ground.

Figure 3: Rear Panel (Example MINI-120)

3.2 Included Accessories

  • Electrode Holder
  • Ground Clamp
  • Brush Mask (Welding Mask)
Image highlighting product accessories: electrode holder, clamp, brush mask.

Figure 4: Product Accessories

4. Specifications

ParameterValue
ModelMINI-300S
Rated Input Voltage220V
Max. Load Power Capacity4.8KVA
Rated Output Voltage24.8 V
Rated Output Current120 A
Welding Current/Voltage Range20-120 A
Rated Duty Cycle @40°C15%
Efficiency85%
Power Factor0.73
No-load Voltage65V
Pulse Frequency50/60 Hz
Motor TypeDC MOTOR
Dimensions (L*W*H)215mm * 100mm * 130mm
Weight2.4 KG
Usable Electrode Diameter1.6-3.2 MM
Insulation ClassF
FunctionMMA Inverter IGBT Welding Machine
FeatureINVERTER, Easy Arc Ignition (Hot start)
ConditionNew
UsageMMA WELDING
Warranty1 Year
Diagram showing dimensions and detailed specifications table for MINI120.

Figure 5: Detailed Specifications (Example MINI-120)

5. Setup

  1. Unpacking: Carefully remove the welding machine and all accessories from the packaging. Inspect for any damage.
  2. Placement: Place the machine on a stable, level surface in a well-ventilated area, away from moisture and direct sunlight. Ensure adequate space around the machine for cooling.
  3. Connect Ground Clamp: Connect the ground clamp cable to the appropriate output terminal (usually the negative (-) terminal for most MMA welding) on the front panel. Securely attach the ground clamp to the workpiece or welding table, ensuring good electrical contact.
  4. Connect Electrode Holder: Connect the electrode holder cable to the remaining output terminal (usually the positive (+) terminal) on the front panel. Insert the welding electrode into the holder.
  5. Power Connection: Ensure the welding machine's power switch is OFF. Connect the power cord to a suitable 220V power outlet.
Welding cables with electrode holder and ground clamp.

Figure 6: Welding Cables and Accessories

6. Operating Instructions

  1. Turn On: Flip the power switch to the ON position. The power indicator light should illuminate.
  2. Adjust Current: Use the current adjustment knob on the front panel to set the desired welding current. The appropriate current depends on the electrode type, diameter, and material thickness.
  3. Prepare for Welding: Don your full PPE, including welding helmet, gloves, and protective clothing.
  4. Start Welding: Bring the electrode into contact with the workpiece to strike an arc. Maintain a consistent arc length and travel speed for a quality weld.
  5. Monitor Indicators: Pay attention to the overload/temperature indicator. If it illuminates, the machine may be overheating. Stop welding and allow the machine to cool down.
  6. Turn Off: After welding, turn the power switch to the OFF position.

Video 1: EDON MINI-120 Welding Machine Overview

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents.
  • Cable Inspection: Regularly inspect welding cables, electrode holder, and ground clamp for cuts, cracks, or loose connections. Replace damaged components immediately.
  • Fan Check: Ensure the cooling fan operates freely and is not obstructed.
  • Storage: Store the machine in a dry, clean environment when not in use.

8. Troubleshooting

This section covers common issues you might encounter and their potential solutions.

ProblemPossible CauseSolution
Machine does not power onNo power supply; Faulty power cord/plug; Internal faultCheck power outlet and circuit breaker; Inspect power cord; Contact support
No arc or weak arcPoor ground connection; Incorrect current setting; Wet/damaged electrode; Loose cable connectionsEnsure good ground contact; Adjust current; Use dry electrode; Tighten connections
Overload/Temperature light onMachine overheating due to prolonged use or insufficient ventilationStop welding, allow machine to cool down; Ensure proper ventilation
Excessive spatterCurrent too high; Arc length too long; Incorrect electrode angleReduce current; Shorten arc length; Adjust electrode angle

9. User Tips

  • Practice Makes Perfect: If you are new to welding, practice on scrap metal to get a feel for arc striking, current settings, and travel speed before working on important projects.
  • Electrode Selection: Always choose the correct electrode type and diameter for your specific material and application.
  • Cleanliness: Ensure the workpiece is clean and free of rust, paint, or grease for better weld quality.
  • Ventilation: Always prioritize good ventilation to disperse welding fumes, even for short tasks.

10. Warranty and Support

The EDON MINI-300S welding machine comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact our customer service:

  • WhatsApp: +86 16633953613
  • Email: jinpin13@126.com

Engineers are available to service machinery overseas.

© 2024 EDON. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.