1. Product Overview
The EDON MIG MMA MIG-285 is a high-quality inverter welding machine designed for both MIG (Metal Inert Gas) and MMA (Manual Metal Arc) welding processes. Featuring smart one-key operation, this welder offers lightweight portability and uncompromising performance for various welding tasks. It supports both gas (solid wire) and gasless (flux-core wire) welding, making it versatile for different applications.
Key features include an LED display for clear parameter readings, one-key control for ease of use, a durable plastic body design, strong ventilation for efficient cooling, and robust insulation for safety and longevity.


2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death. Read and understand all instructions before operating the welder.
- Electric Shock: Welding current can cause fatal electric shock. Ensure proper grounding, use dry gloves, and insulate yourself from the workpiece.
- Fumes and Gases: Welding produces fumes and gases that can be hazardous to your health. Work in a well-ventilated area or use a fume extractor.
- Arc Rays: Arc rays can injure eyes and burn skin. Always wear a welding helmet with appropriate shade lenses and protective clothing.
- Fire and Explosion: Welding sparks and hot metal can cause fires or explosions. Keep flammable materials away from the welding area.
- Hot Parts: Welder components and welded materials can become extremely hot. Allow them to cool before handling or wear appropriate heat-resistant gloves.
- Noise: Excessive noise can damage hearing. Wear ear protection.
Always consult local safety regulations and standards for welding operations.
3. Package Contents
Upon unpacking, please verify that all items listed below are present and undamaged:
- EDON MIG MMA MIG-285 Inverter Welder Unit
- MIG Torch
- Ground Clamp
- Electrode Holder (for MMA welding)
- Welding Mask
- Wire Brush / Hammer

4. Specifications
The following table outlines the technical specifications for the EDON MIG-285 Inverter Welder:
| Parameter | MIG-285 |
|---|---|
| Input Voltage (V) | 1PH AC 220V±15%, 50/60Hz |
| Input Current (A) | 25.8 |
| Output Power Capacity (KVA) | 5.7 |
| Output Current Range (A) | MIG: 50-160A, MMA: 20-150A |
| Wire (mm) | 0.8-1.0 |
| Electrode (mm) | 1.6-4.0 |
| No-load Voltage (V) | 57 |
| Rated Duty Cycle 40°C (%) | 60 |
| Efficiency (%) | 85 |
| Power Factor | 0.73 |
| Protection Class | IP21S |
| Insulation Class | F |
| Dimension (mm) | 400x200x335 |
| Weight (kg) | 9.35 |
| Brand Name | EDON / XMSJ |
| Origin | Mainland China |
| Certification | CE |
| Core Components | PCB |

5. Features and Technology
The EDON MIG-285 welder incorporates advanced technology to deliver superior welding performance:
- Dual Welding Modes: Supports both Gas (Solid wire) and Gasless (flux-core wire) welding, offering flexibility for various projects and materials.
- Wide Material Compatibility: Capable of welding normal carbon steel, stainless steel, and other metal types.
- Portability: Designed to be easy-carry, making it suitable for all fields of welding.
- Automatic Gas Blow: Gas continues to blow for 3-5 seconds automatically after welding, ensuring perfect ending seams.
- Advanced Internal Components:
- IGBT/MOSFET Tube: Utilizes high-quality IGBT/MOSFET technology for stable and efficient power delivery.
- High Quality Radiator: Features a larger size radiator for efficient heat dissipation, ensuring prolonged operation.
- Intelligent Fan: Equipped with an intelligent fan that includes anti-electric shock protection and automatically stops when not needed, enhancing safety and energy efficiency.
- Durable Capacitor: Designed for welders, enduring high temperatures and offering a longer lifetime.
- SMT Control Board & PC Circuit Board: Self-producing, efficient, and durable control boards ensure precise operation.
- Amorphous Structure Transformer: Provides better performance, reduces power waste significantly, and offers high durability.
- Energy Saving & High Efficiency: Engineered for lower power consumption and environmental protection.



6. Setup
- Unpacking: Carefully remove the welding machine and all accessories from the packaging. Inspect for any shipping damage.
- Power Connection: Connect the welder to a suitable 220V AC power supply. Ensure the power source meets the welder's requirements (1PH AC 220V±15%, 50/60Hz).
- Ground Clamp Connection: Attach the ground clamp cable securely to the designated terminal on the welder. Connect the ground clamp to the workpiece or a sturdy metal workbench to ensure a good electrical connection.
- MIG Torch Connection: Connect the MIG torch cable to the appropriate connector on the front panel of the welder. Ensure it is firmly seated and locked.
- MMA Electrode Holder Connection (if using MMA): If performing MMA welding, connect the electrode holder cable to the designated terminal.
- Gas Connection (for Solid Wire MIG welding): If using solid MIG wire that requires shielding gas, connect your gas cylinder regulator to the gas inlet on the rear of the welder. Ensure all connections are tight to prevent leaks.
- Wire Feed Setup (for MIG welding): Open the wire feed compartment. Install the appropriate welding wire spool (0.8-1.0mm) and thread the wire through the feed mechanism and into the MIG torch liner. Adjust the wire tension according to the wire type and diameter.
7. Operating Instructions
- Power On: Turn on the main power switch located on the rear panel of the welder. The LED display on the front panel will illuminate.
- Select Welding Mode: Use the 'FUNCTION' knob or button to select between MIG and MMA welding modes.
- Adjust Parameters:
- For MIG Welding: Adjust the 'ARC PRESSURE' (voltage) and 'CURRENT' (wire speed) knobs according to the material thickness and wire type. The smart one-key control may offer preset settings for common applications.
- For MMA Welding: Adjust the 'CURRENT' knob to set the welding amperage suitable for your electrode type and material thickness.
- Prepare Workpiece: Clean the welding area of any rust, paint, or contaminants to ensure a strong weld.
- Begin Welding:
- MIG Welding: Position the MIG torch nozzle close to the workpiece. Press the trigger to initiate the arc and wire feed. Maintain a consistent travel speed and torch angle.
- MMA Welding: Strike the electrode against the workpiece to initiate the arc. Maintain a consistent arc length and travel speed.
- Post-Weld Gas Flow (MIG): The welder will automatically continue gas flow for 3-5 seconds after releasing the trigger to protect the cooling weld puddle and ensure perfect seams.
- Power Off: After completing your welding tasks, turn off the main power switch.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EDON MIG MMA MIG-285 welder.
- Cleaning: Regularly clean the exterior of the welder with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is powered off and unplugged before cleaning.
- Cable and Connection Inspection: Periodically inspect all welding cables, ground clamp, and torch connections for wear, damage, or loose fittings. Replace damaged cables immediately.
- MIG Torch Consumables: For MIG welding, regularly check and replace worn contact tips, nozzles, and diffusers. Ensure the wire liner is clean and free of kinks.
- Electrode Holder: For MMA welding, ensure the electrode holder jaws are clean and provide a firm grip on the electrode.
- Ventilation: Ensure the welder's ventilation grilles are unobstructed to allow for proper airflow and cooling.
- Storage: Store the welder in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.

9. Troubleshooting
This section provides solutions to common issues you might encounter. For problems not listed here, please contact customer support.
- No Power: Check the power cable connection, main power switch, and circuit breaker. Ensure the input voltage matches the welder's requirements.
- No Arc: Ensure the ground clamp is securely attached to the workpiece. Check welding cable connections. For MIG, ensure wire feed is working and contact tip is clean. For MMA, ensure electrode is making good contact.
- Poor Weld Quality: Adjust welding parameters (current, voltage, wire speed). Ensure the workpiece is clean. Check for proper gas flow (if applicable) and correct consumables.
- Overheating Indicator On: The welder has an internal thermal overload protection. Allow the machine to cool down. Ensure ventilation is not obstructed.
- Wire Feeding Issues (MIG): Check wire spool installation, wire tension, and ensure the wire liner is not clogged or kinked. Replace worn contact tips.
10. Warranty and Support
The EDON MIG MMA MIG-285 Inverter Welder comes with a 12 MONTHS warranty. Core components are covered by a 1 Year warranty.
For technical assistance, warranty claims, or any other inquiries, please contact our customer service:
- WhatsApp: +86 16633953613
- Email: jinpin13@126.com
Please have your product model and purchase details ready when contacting support.