1. Introduction
Thank you for choosing the HYULIGHTS HYU-200PS 300W LED Beam & Strobe Light. This professional lighting fixture is designed to deliver powerful and versatile effects for stage performances, DJ setups, discos, and parties. Please read this manual thoroughly before operation to ensure safe and correct usage.
The HYULIGHTS HYU-200PS LED Beam & Strobe Light in action.
2. Package Contents
Upon unpacking your device, please verify that all items listed below are included and in good condition:
- 1 x HYULIGHTS HYU-200PS LED Beam & Strobe Light
- 1 x Power Cable
- 1 x User Manual
- 1 x DMX Cable
- 1 x Bow Mount
- 2 x Screws for mounting
Illustration of the package contents.
3. Setup
The HYU-200PS features a self-contained design for easy installation. Follow these steps to set up your light:
3.1 Mounting
- Attach the provided bow mount to the sides of the light fixture using the two screws.
- Secure the light to a stable surface or truss system. Ensure the mounting is firm and can support the weight of the fixture.
Side view illustrating the mounting bracket.
3.2 Connections
Refer to the rear panel diagram for connection points:
Rear panel with power and DMX connections.
- **Power Connection:** Connect the provided power cable to the 'POWER IN' port (AC100-240V, 50/60Hz). You can daisy-chain power to other units using the 'POWER OUT' port.
- **DMX Connection:** For DMX control, connect a 3-pin XLR cable from your DMX controller to the 'DMX IN' port. Use the 'DMX OUT' port to connect to the next fixture in a DMX chain.
- **Plug Type:** Ensure you use the correct plug type (EU, US, AU, UK) for your region.
4. Operating Instructions
The HYU-200PS offers various control modes and features for dynamic lighting effects.
4.1 Control Modes
The light supports the following control modes:
- **Auto Mode:** Built-in 67 auto effect modes for automatic light shows.
- **Sound Mode:** Built-in 5 sound modes that react to music.
- **DMX Mode:** For professional control via a DMX controller, utilizing 5, 10, or 112 channels.
- **Master/Slave Mode:** Link multiple units for synchronized operation.
4.2 Display Screen and Buttons
The rear panel features a digital display screen and control buttons (MENU, UP, DOWN, ENTER) to navigate settings and select modes.
4.3 Key Features
- High Power Output: Equipped with 384pcs SMD5050 RGB 3in1 0.3W LEDs and 256pcs White 0.2W LEDs, plus 24pcs 5W White Beam Effect LEDs, delivering super bright RGBW 4-in-1 effects.
- Color Variety: Capable of 16.7 million kinds of color changes.
- Strobe Effect: Up to 30 flashes per second (any color).
- Smooth Dimming: 0-100% smooth dimming for precise light intensity control.
- Beam Angle: Features a 3-degree beam angle for focused light projection.
Demonstration of the HYULIGHTS HYU-200PS light effects and features.
Examples of dynamic light effects.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
5.1 Cleaning
- Clean the exterior casing and lenses periodically with a soft, lint-free cloth.
- Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.
- Ensure the fan vents are clear of dust and debris to prevent overheating.
5.2 Storage
- Store the fixture in a dry, dust-free environment when not in use.
- Avoid extreme temperatures and humidity.
6. Troubleshooting
If you encounter issues with your HYU-200PS, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on | No power supply; Faulty cable; Blown fuse | Check power connection; Test with another cable; Replace fuse if accessible (consult professional if unsure). |
| No DMX control | Incorrect DMX address; Faulty DMX cable; DMX termination issue | Verify DMX address on fixture and controller; Check DMX cable connections; Ensure proper DMX termination. |
| Intermittent operation | Loose connections; Overheating | Check all power and DMX connections; Ensure adequate ventilation and clear fan vents. |
If the problem persists, please contact customer support.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HYULIGHTS |
| Model Number | HYU-200PS |
| Item Type | Stage Lighting Effect |
| Power | 300W |
| Voltage | 90-240V |
| Nominal Voltage | Other |
| Power Source | AC |
| Is Bulbs Included | Yes |
| Luminous Flux | >82000 |
| Installation Method | Self-contained |
| Certification | CE, FCC, RoHS, WEEE |
| Style | DMX Stage Light |
| Occasion | Professional Stage & DJ |
| LED Strobe | 384pcs SMD5050 RGB 3in1 0.3W LED + 256pcs White 0.2W LED |
| LED Beam | 24pcs 5W White Beam Effect |
| Channel | 5/10/112 Channel |
| Beam angle | 3 angle |
| Control mode | Auto, Sound, DMX, Master/Slave, RDM |
| Strobe | 20 Flashes per second any color |
| Features | Built -in 5 SOUND modes, 67 Auto effect modes. |
| Net Weight (N.W) | 3.8KG |
| Gross Weight (G.W) | 4.65KG |
| Product Size | 45x26x11cm |
| Package Size | 48x30x17cm |
8. User Tips
- For optimal performance, ensure the light fixture is placed in a well-ventilated area to prevent overheating.
- Experiment with different DMX channel modes (5, 10, or 112) to find the level of control that best suits your needs. The 112-channel mode offers granular control over individual LED segments.
- When using multiple units in Master/Slave mode, ensure all slave units are set to the correct mode and connected in a proper DMX chain.
- Regularly check and clean the lenses to maintain maximum light output and clarity of effects.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.