1. Introduction
Thank you for choosing the Batmax 3.7V 1050mAh Li-ion Replacement Battery. This manual provides important instructions for the safe handling, installation, operation, and maintenance of your new battery. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
Lithium-ion batteries are powerful and require careful handling. Please observe the following safety precautions:
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Do not expose the battery to high temperatures (above 60°C/140°F) or direct sunlight.
- Do not dispose of the battery in fire or water.
- Keep the battery away from children and pets.
- If the battery leaks, avoid contact with skin and eyes. Rinse immediately with plenty of water and seek medical attention.
- Use only chargers specifically designed for Li-ion batteries.
- Recycle used batteries responsibly according to local regulations.
This battery features multiple protection mechanisms including over current, over charge, over-voltage, over heat, and short circuit protection to ensure safe operation.

3. Package Contents
Your package will contain the quantity of batteries selected at purchase. Each battery is individually packaged.
- 1, 2, 3, or 4 x Batmax 3.7V 1050mAh Li-ion Replacement Battery

4. Specifications
| Feature | Specification |
|---|---|
| Model Number | SL910 |
| Battery Type | Li-ion (Lithium-ion) |
| Capacity | 1050mAh |
| Voltage | 3.7V |
| Energy | 3.9Wh |
| Dimensions (L x W x H) | 53mm x 34mm x 5.5mm |
| Weight | 22g |
| Certification | CE |


5. Compatibility
This Batmax replacement battery is designed to be compatible with the following Siemens Gigaset cordless phone models and battery part numbers:
Compatible Phone Models:
- SIEMENS Gigaset SL910
- SIEMENS Gigaset SL910A
- SIEMENS Gigaset SL910H
Compatible Battery Part Numbers:
- SIEMENS V30145-K1310K-X447
- SIEMENS V30145-K1310K-X447-0-HY

6. Installation and Setup
Follow these steps to install the replacement battery in your Siemens Gigaset SL910 series cordless phone:
- Power Off: Ensure your cordless phone is completely powered off and disconnected from its charging base.
- Locate Battery Compartment: Turn the phone over and locate the battery compartment cover, usually on the back.
- Remove Cover: Slide or unclip the battery compartment cover to open it.
- Remove Old Battery: Carefully remove the old battery. Note its orientation.
- Insert New Battery: Insert the new Batmax battery, ensuring the contacts align correctly with the phone's terminals. Do not force the battery.
- Replace Cover: Securely close the battery compartment cover.
- Initial Charge: Place the phone on its charging base. Allow the battery to charge fully for several hours (refer to your phone's original manual for specific initial charging times) before its first use. This helps calibrate the battery for optimal performance.
7. Operation
Once installed and fully charged, your Batmax replacement battery will power your Siemens Gigaset cordless phone as expected. The phone's display will indicate battery status. For optimal battery life, it is generally recommended to allow the battery to discharge significantly before recharging, but avoid letting it completely drain to 0% frequently.
8. Maintenance
Proper maintenance can extend the life of your battery:
- Regular Charging: Keep the phone on its charging base when not in use to ensure it's always ready.
- Avoid Extreme Temperatures: Do not expose the phone or battery to extreme heat or cold, as this can degrade battery performance and lifespan.
- Clean Contacts: Periodically clean the battery contacts on both the battery and the phone with a dry, clean cloth to ensure good connection.
- Storage: If storing the battery for an extended period, charge it to about 50% and store it in a cool, dry place. Recharge it every 3-6 months to prevent deep discharge.
9. Troubleshooting
If you encounter issues with your replacement battery, consider the following:
- Battery Not Charging:
- Ensure the phone is correctly seated on the charging base.
- Check that the charging base is properly connected to a power source.
- Clean the charging contacts on both the phone and the base.
- Verify the battery is correctly installed in the phone.
- Short Battery Life:
- Ensure the battery has undergone a full initial charge cycle.
- Reduce phone usage that consumes a lot of power (e.g., long calls, backlight always on).
- The battery may require a few charge/discharge cycles to reach its full capacity.
- Phone Not Powering On:
- Confirm the battery is fully charged and correctly installed.
- If the issue persists, try reinstalling the battery.
If these steps do not resolve the issue, please contact customer support.
10. User Tips
- For best results, perform a full charge and discharge cycle 2-3 times after initial installation.
- Always use the original phone charger and base for charging to prevent damage to the battery or phone.
- If your phone has a battery saving mode, enabling it can help extend daily usage time.
11. Warranty and Support
Your Batmax replacement battery is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or seller's information for specific warranty terms and duration.
For technical support, warranty claims, or any questions regarding your product, please contact the seller directly through the platform where you made your purchase. Provide your order number and a detailed description of the issue for prompt assistance.