1. Important Safety Information
Please read this manual carefully before operating your iScooter EB1 electric bike. Failure to follow instructions can lead to serious injury or damage to the product. Keep this manual for future reference.
- Always wear a helmet and appropriate safety gear when riding.
- Familiarize yourself with local laws and regulations regarding electric bikes.
- Perform a pre-ride safety check before each use.
- Do not ride under the influence of alcohol or drugs.
- Avoid riding in heavy rain, snow, or icy conditions.
- Ensure the battery is properly charged and secured before riding.
- Disclaimer: ⚠️Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
2. Product Overview
The iScooter EB1 is a compact and portable foldable electric bike designed for urban commuting and leisure rides. It features a powerful motor, long-lasting battery, and intelligent controls for a smooth riding experience.




3. Setup and Assembly
The iScooter EB1 is designed for quick and easy setup. Follow these steps to prepare your bike for its first ride.
3.1 Unfolding the Bike
- Carefully remove the bike from its packaging.
- Place the bike on a flat, stable surface.
- Release the frame latch to unfold the main frame. Ensure it clicks securely into place.
- Unfold the handlebar stem and secure the quick-release lever.
- Adjust the handlebar height to your preference and tighten the clamp.
- Adjust the seat post height using the quick-release lever. Ensure the seat post is inserted past the minimum insertion line.
- Unfold the pedals.

3.2 Initial Battery Charge
Before your first ride, fully charge the battery. This typically takes 4-5 hours.
- Locate the charging port on the bike.
- Connect the charger to the charging port, then plug it into a power outlet.
- The charger indicator light will show charging status (e.g., red for charging, green for fully charged).
- Do not overcharge the battery. Disconnect once fully charged.


4. Operating Instructions
Learn how to operate your iScooter EB1 safely and efficiently.
4.1 Powering On/Off
- To power on, press and hold the power button on the LCD display until the screen illuminates.
- To power off, press and hold the power button again until the display turns off.
4.2 LCD Display Functions
The intelligent LCD display provides essential riding information:


- Cruise Control: Activates when a steady speed is maintained.
- Battery Level: Shows remaining battery charge.
- Real-Time Speed: Displays current riding speed.
- Headlight Indicator: Shows if the headlight is on.
- Speed Level: Indicates the current pedal assist level (3-speed adjustment).
- Brake Applied Indicator: Illuminates when brakes are engaged.
4.3 Riding Modes and Speed Adjustment
The EB1 offers multiple speed levels for varied riding conditions. Use the '+' and '-' buttons on the display to cycle through the 3 available speed levels.
4.4 Braking System
The iScooter EB1 is equipped with front and rear disc brakes for reliable stopping power.

- Always apply both brakes simultaneously for optimal stopping performance.
- Avoid sudden, hard braking, especially at high speeds or on slippery surfaces.
4.5 Lights
The bike features a bright front headlight and a warning rear light for enhanced visibility and safety, especially during night riding.

4.6 Smart Uphill Assistance
The EB1 is designed with smart uphill assistance to help you conquer inclines with ease.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your iScooter EB1.
5.1 Battery Care
- Charge the battery regularly, even if not in use, to maintain its health.
- Store the bike and battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- Do not expose the battery to water or moisture.
5.2 Tire Maintenance
- Check tire pressure before each ride. Maintain recommended PSI (refer to tire sidewall for specific values).
- Inspect tires for wear, punctures, or damage. Replace if necessary.
5.3 Brake System Check
- Regularly check brake levers for proper tension and responsiveness.
- Inspect brake pads for wear and replace them when they are thin.
- Ensure brake discs are clean and free from oil or grease.
5.4 General Cleaning and Lubrication
- Clean the bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
- Lubricate the chain and folding mechanisms periodically to ensure smooth operation.
6. Troubleshooting
This section addresses common issues you might encounter with your iScooter EB1.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery; Loose battery connection; Faulty power button | Charge battery; Check battery connection; Contact support |
| Motor not assisting | Low battery; Incorrect assist level; Sensor issue | Charge battery; Increase assist level; Check sensor connections; Contact support |
| Brakes feel weak | Worn brake pads; Loose brake cable; Air in hydraulic system (if applicable) | Inspect/replace brake pads; Adjust brake cable tension; Seek professional service |
| Unusual noises during ride | Loose components; Lack of lubrication; Tire rubbing | Check all bolts and fasteners; Lubricate chain/moving parts; Inspect tire clearance |
For issues not listed here or if solutions do not resolve the problem, please contact customer support or a qualified bike technician.
7. Specifications
Detailed technical specifications for the iScooter EB1 Foldable Electric Bike.

| Feature | Specification |
|---|---|
| Model Number | iScooter EB1 |
| Motor Wattage | 350W (Nominal), up to 500W |
| Max Speed | 25 km/h (<25km/h) |
| Battery Type | Lithium Battery |
| Battery Voltage | 36V |
| Battery Capacity | 7.8Ah |
| Range per Charge | 31 - 60 km (approx. 40KM Max Range) |
| Charging Time | 4-5 hours |
| Wheel Size | 14 inches (350mm) |
| Max Slope | 15° |
| Folded | Yes |
| Max Load Capacity | 150 kg |
| Recommended Rider Height | 150cm - 185cm |
| Seat Height from Ground | 87.8 cm |
| Bike Length (unfolded) | 120 cm |
| Bike Height (unfolded, to handlebar) | 96 cm |
| Bike Height (folded) | 83 cm |
8. User Tips
- Pre-Ride Check: Always check tire pressure, brake function, and battery level before each ride for safety and optimal performance.
- Smooth Acceleration: For a comfortable ride and to conserve battery, accelerate gradually rather than abruptly.
- Folding Practice: Practice folding and unfolding the bike a few times at home to become proficient, especially if you plan to transport it frequently.
- Battery Storage: If storing the bike for an extended period, ensure the battery is charged to about 50-70% and check it periodically to prevent deep discharge.
- Adjust for Comfort: Take the time to adjust the seat and handlebar height to your personal comfort for a more enjoyable and ergonomic riding experience.
9. Warranty and Support
Your iScooter EB1 electric bike comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact the seller or authorized service center.
Contact Information: Refer to your purchase documentation or the seller's website for the most up-to-date contact details.