RadioLink T12D

Contents

RadioLink T12D 12CH RC Transmitter User Manual

Model: T12D | Brand: RadioLink

1. Introduction

The RadioLink T12D is a 12-channel fully proportional RC transmitter designed for a wide range of remote-controlled models, including FPV drones, fixed-wing airplanes, gliders, multi-rotors, racing drones, football drones, engineering vehicles, racing boats, robots, lawnmowers, and bait boats. It features a 2.4GHz ISM band, a 2.8-inch 320x240 pixel color screen, and supports various long-range modules like ELRS and TBS Crossfire. This manual provides essential information for setting up, operating, and maintaining your T12D transmitter and R12F receiver.

RadioLink T12D 12CH RC Transmitter front view

Figure 1: Front view of the RadioLink T12D Transmitter.

2. Setup

2.1 Package Contents

Before proceeding, please verify that all items are present in your package:

  • T12D Transmitter *1
  • R12F Receiver *1
  • Type-C Cable (Upgrade) *1
  • Hook and Spring *1
  • Instruction Manual *1
  • Packing Box *1
T12D Packing List showing transmitter, receiver, cable, hook, spring, manual, and box

Figure 2: Visual representation of the T12D packing list.

2.2 Power Supply and Battery Installation

The T12D transmitter supports multiple power supply modes:

  • 8 pieces of AA batteries (Note: New versions may not support AA batteries, only dual 18650).
  • A 2S-4S LiPo battery.
  • An 18650 Lithium battery.
  • Powered via Type-C cable from a computer or mobile power bank.

Important: If using an 18650 Lithium battery, ensure it has a JST connector and the dimensions are 114.4*35.4*32mm. The universal JST connector with voltage protection software ensures component safety from reverse polarity.

Diagram showing multiple power supply options for T12D: AA batteries, 2S-4S LiPo, 18650 Lithium battery, and Type-C power bank connection, with reverse polarity protection circuit.

Figure 3: Multiple power supply options and reverse polarity protection.

Rear view of T12D transmitter with battery compartment open

Figure 4: Rear view showing the battery compartment.

Note on Versions: The new upgraded T12D version cancels the 8 AA dry battery slot and only supports dual 18650 batteries. It also features a built-in integrated JR module bay for external RF modules.

Comparison of old and new T12D rear views, highlighting the VRC center-adjust knob change to white and the new built-in JR module bay.

Figure 5: Comparison of old vs. new T12D rear panel features.

2.3 Receiver Connection and Compatibility

The T12D comes with an R12F 12-channel receiver. It is also compatible with a wide range of other RadioLink receivers, including:

  • R16FG (16 channels)
  • R8EF, R8FM, R8SM, R8XM (8 channels)
  • R8FGH, R8FG (8 channels)
  • R7FG (7 channels)
  • R6FG, R6F (6 channels)
  • R4FGM, R4F (4 channels)

These receivers are designed for various applications, from fixed-wing and helicopters to racing drones and mini RC cars.

Image showing various compatible RadioLink receivers including R16F, R12F, R8FGH, R8FG, R8EF, R8XM, R8FM, R8SM, R7FG, R6FG, R6F, R4FGM

Figure 6: Wide compatibility with various RadioLink receivers.

3. Operating Instructions

3.1 Basic Controls and Screen Interface

The T12D features a 2.8-inch 320*240 pixel 16-color screen for intuitive menu navigation. It includes three 3-position switches, one 2-position switch, two dials, and two sliders, ergonomically designed for pilot needs.

Screenshot of the T12D navigation user reminder parameter setting menu

Figure 7: Navigation Reminder Parameter Setting Menu.

3.2 Telemetry and Long-Range Modules

The T12D offers real-time built-in telemetry of model battery voltage. It fully supports ELRS, TBS Crossfire, and other mainstream long-range modules, allowing adjustment of aircraft parameters such as protocol, baud rate, and WIFI mode directly from the T12D.

Screenshot showing output RSSI value from receiver to FPV monitor and real-time RSSI telemetry when racing

Figure 8: Real-time RSSI Telemetry display.

3.3 Simulator and Trainer Functions

The T12D has a built-in emulator function (requires firmware upgrade to V1.7.0 or above). This allows direct connection to a computer via a Type-C cable to support open-source simulators like TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone, compatible with Mac and Windows systems. A trainer function is also supported.

Image showing various FPV drone simulator logos: TRYP FPV, AeroFly, Liftoff, FPV LOGIC, Uncrashed, Velocidrone

Figure 9: Built-in emulator supports popular RC simulators.

T12D transmitter connected to a laptop running a simulator

Figure 10: T12D used with a flight simulator.

3.4 Programmable Mix Control

All 12 channels can be programmed for advanced mixing. Multiple mixing controls can be cascaded to achieve single-switch control over any number of channels, making the T12D suitable for daily training or competitive use.

Screenshots of programmable mix control settings on the T12D display

Figure 11: Programmable Mix Control settings.

3.5 Multiple Languages

The T12D features an optional language menu that includes English, German, French, Russian, Japanese, Spanish, Korean, Thai, and Polish. Voice broadcasts can also be customized in multiple languages.

T12D screen displaying menu in multiple languages

Figure 12: T12D menu supporting multiple languages.

4. Maintenance

4.1 Battery Care

To ensure optimal performance and longevity of your T12D, follow these battery care guidelines:

  • Always use recommended battery types (2S-4S LiPo or 18650 Lithium battery).
  • Charge batteries using appropriate chargers.
  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid over-discharging or over-charging batteries.

The T12D's power supply circuit design provides longer battery life, with an operating amperage of only 100mA (±10mA) at 8.4VDC, consuming 50% less power than similar products. It can operate for up to twelve hours with an 1800mAh LiPo battery.

Diagram illustrating T12D's power efficiency: 90mA operating amperage and 12 hours total duration with an 1800 mAh LiPo battery

Figure 13: Power efficiency and battery life.

4.2 Firmware Upgrade

The R12F receiver supports online upgrades. Connect the R12F to your computer using the provided Type-C cable for data transmission. This allows for easy addition of the latest cutting-edge functions without extra devices.

Image showing an R12F receiver connected to a laptop via a Type-C cable for online upgrade

Figure 14: R12F Receiver online upgrade via Type-C cable.

5. Troubleshooting

  • Low Voltage Alarm: The T12D provides customizable low voltage alarms for the transmitter, receiver, model battery, or low RSSI. Monitor these alarms on the screen and address power issues promptly.
  • Connectivity Issues: The T12D boasts excellent anti-interference capabilities, ensuring stable transmission. If you experience signal loss or erratic behavior, ensure your operating environment is free of major interference sources.
  • General Questions: If you have questions about operation or encounter issues not covered in this manual, please consult the tutorials and FAQs available on the RadioLink website. You can also contact after_service@radiolink.com.cn for further assistance.
Spectrum analyzer graph demonstrating excellent anti-interference capability of the T12D

Figure 15: Anti-interference capability of the T12D.

6. Specifications

6.1 T12D Transmitter Specifications

Feature Specification
Channels12 fully proportional (5-12 programmable)
Output Frequency2.4GHz ISM band (2400MHz~2483.5MHz)
Spread SpectrumFHSS 67 channels pseudo-random frequency hopping/CRSF
Operating SystemsfreeRTOS+LVGL GUI
Long-range Module SupportELRS, TBS Crossfire, other mainstream modules
Response Latency3ms, 4ms, 14ms selectable
Channel Resolution4096 with 0.5us jitter
Modulation ModeGFSK
Transmitter Power<100mW (20dBM)
Reception Sensitivity-104dBM
Operating Voltage7.4-18.0V (2S-4S LiPo or 18650 Lithium battery)
Type-C Port Input Voltage5V
Operating Current100mA (±10mA)@8.4VDC
Control Distance (FHSS)4000 meters in the air (unobstructed)
Adaptable ModelsRotary Wing/Fixed-wing/Glider/Multicopter/Car/Boat/Robot
Signal OutputPWM & SBUS & PPM
Storage Model Quantity100
Screen2.8 inches, 16 colorful screens, 320*240 pixels
Operating Temperature-30° to 85° C
Diagram showing T12D's mainstream operating system with 1M bytes RAM, 208MHz basic frequency, and 320x240 LCD

Figure 16: T12D Top Configuration details.

6.2 R16F Receiver Specifications (for reference, R12F is included)

Feature Specification
Antenna Length205mm (8.07”)
Channels16 channels
Operating Voltage3-12V
Operating Current50±10mA@5V
Signal OutputSBUS+PWM
Output Frequency2.4GHz ISM band (2400MHz~2483.5MHz)
Spread SpectrumFHSS 67 channels pseudo-random frequency hopping
Section Precision4096, 0.5us per section
Control Distance4000 meters in the air (unobstructed)
TelemetryReal-time model battery voltage, RSSI, receiver voltage
EXT Battery Input1S-8S (3.0-33.6V)
GyroIntegrated, customizable sensitivity
Water Splash ProofIPX4
Operating Temperature-30° to 85° C
Compatible TransmittersT16D/T12D/T8FB/T8S/RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS V2/RC6GS/RC4GS

6.3 Physical Dimensions

  • Package Length: 27 cm
  • Package Width: 23 cm
  • Package Height: 13 cm
  • Package Weight: 1.0 kg
Dimensions of a typical 11.1V 8C 2200mAh LiPo battery: 105mm length, 30mm width, 21mm height

Figure 17: Example battery dimensions.

7. Warranty and Support

For any questions, technical support, or issues with your RadioLink T12D transmitter or R12F receiver, please contact the manufacturer's customer service. You can reach them via email at after_service@radiolink.com.cn. Please provide detailed information about your issue, including any relevant pictures or videos, to facilitate a quicker resolution.

8. User Tips

  • Detailed Manuals: While this manual covers essential aspects, some users have expressed a desire for more detailed instructions. Always check the official RadioLink website for the most up-to-date and comprehensive manuals, tutorials, and FAQs.
  • Firmware Updates: Regularly check for and apply firmware updates for both your T12D transmitter and R12F receiver to ensure you have the latest features and bug fixes.
  • Battery Compatibility: Be mindful of the battery type supported by your specific T12D version, especially regarding the transition from AA batteries to 18650 Lithium batteries in newer models.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.