1. Product Overview
The ME54BS11 is a highly flexible, ultra-low power, and cost-effective Bluetooth module based on the Nordic nRF54L15 SoC. It integrates a powerful Arm® Cortex®-M33 CPU running at 128MHz and is designed with PSA Level 3 certification for high security. This module supports a wide range of protocols including Bluetooth LE 6.0 Channel Sounding, Bluetooth Mesh, Thread, Matter, and proprietary 2.4 GHz protocols, making it suitable for various IoT and wireless communication applications.

2. Key Features
- Bluetooth 6.0 support
- High cost-performance ratio
- Ultra-low power consumption
- Multi-Protocol support: Bluetooth LE 6.0 Channel Sounding, Bluetooth Mesh, Thread, Matter, and proprietary 2.4 GHz protocols
- Integrated Arm® Cortex®-M33 CPU (128MHz)
- PSA Level 3 security certification
- Compact module size: 15.8 × 12 × 2 mm
- PCB Antenna
- 1.5MB Flash memory
- 256KB RAM
- Receiving Sensitivity: -96dBm
- Transmission Power: -40~+8dBm
- 12 GPIO pins
3. Specifications
| Attribute | Value |
|---|---|
| SoCset | Nordic nRF54L15 |
| Antenna | PCB |
| Module Size | 15.8 × 12 × 2 mm |
| Flash | 1.5MB |
| RAM | 256KB |
| Receiving Sensitivity | -96dBm |
| Current (TX) | 0dBm-5mA |
| Transmission Power | -40~+8dBm |
| GPIO | 12 |
| Communication Method | Bluetooth-Compatible, RF |
| Origin | Mainland China |
4. Pin Assignment
The ME54BS11 module features 18 pins for various functionalities. Refer to the diagram below for the pin descriptions and their assignments.

| Pin No. | Description |
|---|---|
| 1 | RF |
| 2 | P1.11 |
| 3 | P1.12 |
| 4 | P1.13 |
| 5 | P1.14 |
| 6 | P1.03 |
| 7 | P1.02 |
| 8 | P1.06 |
| 9 | P1.05 |
| 10 | VCC |
| 11 | GND |
| 12 | P0.00 |
| 13 | P0.01 |
| 14 | P0.02 |
| 15 | P0.03 |
| 16 | SWDIO |
| 17 | SWCLK |
| 18 | NRESET |
5. Mechanical Drawing
The following diagram provides the mechanical dimensions of the ME54BS11 module. All units are in millimeters (mm) with a default tolerance of ±0.15mm.

6. Packaging Information
The ME54BS11 modules are typically supplied in reel packaging. The following image illustrates the packaging details and dimensions.

| Details | Quantity | Tape Weight | Gross Weight | Dimension |
|---|---|---|---|---|
| Reel-ME54BS11 | 850PCS | 595g | 1470g | W:44mm T:0.35mm |
Note: The default weight error is within 10g (except for special instructions).
7. Setup and Integration
The ME54BS11 is a surface-mount module designed for integration into larger electronic systems. Proper setup requires knowledge of electronics and embedded systems development.
7.1. Hardware Integration
- Mounting: Solder the module onto your PCB according to the mechanical drawing and pin assignments. Ensure proper alignment and secure connections.
- Power Supply: Connect the VCC and GND pins to a stable power supply within the module's specified operating voltage range. Refer to the nRF54L15 datasheet for exact voltage requirements.
- Antenna: The module includes an integrated PCB antenna. Ensure there are no metallic objects or ground planes directly beneath or too close to the antenna area on your host PCB to avoid signal interference and degradation.
- GPIO Connections: Connect the necessary GPIO pins to your microcontroller or peripheral components based on your application's design.
- Programming/Debugging Interface: Connect the SWDIO and SWCLK pins to a compatible programmer/debugger (e.g., an SWD debugger) for firmware flashing and debugging. The NRESET pin can be used for hardware reset.
7.2. Software Development
Development for the nRF54L15 typically involves using the Nordic Semiconductor SDK (Software Development Kit). This SDK provides drivers, libraries, and example applications for Bluetooth LE, Mesh, Thread, Matter, and other protocols.
- SDK Installation: Download and install the latest Nordic nRF Connect SDK.
- Toolchain Setup: Configure your development environment with the appropriate compiler and debugger tools.
- Firmware Development: Write or adapt firmware using the SDK to implement your desired wireless functionality.
- Flashing: Use your programmer/debugger to flash the compiled firmware onto the ME54BS11 module.
For detailed software development guides, refer to the official Nordic Semiconductor documentation for the nRF54L15.
8. Operation
Once integrated and programmed with appropriate firmware, the ME54BS11 module operates autonomously or under the control of a host microcontroller.
8.1. Power On/Off
The module powers on when VCC is applied. Ensure the power supply is stable and within specifications. Power off by removing VCC.
8.2. Wireless Communication
The module's wireless behavior (e.g., advertising, connecting, data transfer) is determined by the loaded firmware. It can function as a Bluetooth LE peripheral, central, or participate in Mesh, Thread, or Matter networks depending on the application.
8.3. Low Power Modes
The nRF54L15 SoC supports various low-power modes. Firmware should be designed to utilize these modes to achieve ultra-low power consumption, extending battery life in portable applications.
9. Maintenance
The ME54BS11 module is a sealed electronic component and generally requires no routine maintenance. However, consider the following for optimal performance and longevity:
- Environmental Conditions: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme conditions, moisture, or corrosive environments.
- Cleaning: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Firmware Updates: Periodically check for firmware updates from the module manufacturer or Nordic Semiconductor to benefit from bug fixes, performance improvements, and new features.
- Physical Inspection: Occasionally inspect the module and its solder joints for any signs of damage or corrosion.
10. Troubleshooting
If you encounter issues with your ME54BS11 module, consider the following troubleshooting steps:
10.1. No Power/Module Not Responding
- Check Power Supply: Verify that VCC and GND connections are correct and the power supply voltage is within the specified range.
- Solder Joints: Inspect all solder joints for cold joints, shorts, or poor connections.
- Reset: Try asserting the NRESET pin to perform a hardware reset.
10.2. Communication Issues (Bluetooth/RF)
- Antenna Clearance: Ensure the PCB antenna area is clear of obstructions and metallic components.
- Firmware: Verify that the correct firmware is loaded and configured for the desired communication protocol.
- Range: Check if the module is within the expected communication range of the other device.
- Interference: Identify potential sources of 2.4 GHz interference (e.g., Wi-Fi routers, other Bluetooth devices).
10.3. Programming/Debugging Problems
- SWD Connections: Double-check the connections to SWDIO, SWCLK, VCC, and GND from your programmer.
- Driver Installation: Ensure your programmer/debugger drivers are correctly installed on your computer.
- Toolchain Configuration: Verify that your IDE and toolchain are correctly configured for the nRF54L15.
For more advanced troubleshooting, consult the Nordic nRF54L15 datasheet and the Nordic Semiconductor developer forums.
11. Warranty and Support
This ME54BS11 module is manufactured by MINEWSEMI. For specific warranty information, please refer to the terms and conditions provided by your point of purchase or contact MINEWSEMI directly.
The seller, MinewSemi Module Store, offers free technical support for this product. You can reach out to them through the AliExpress platform for assistance.
General support resources for Nordic Semiconductor products, including datasheets, application notes, and development forums for the nRF54L15, are available on the Nordic Semiconductor website.