JIKONG JK-BD6A8S10P

Contents

JIKONG JKBMS Smart Active Balance BMS User Manual

Model: JK-BD6A8S10P

1. Introduction

The JIKONG JKBMS (Battery Management System) is an intelligent active balance power management system designed for various lithium battery types, including Li-ion, LiFePO4, and LTO. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JKBMS.

The JK-BD6A8S10P model supports 4S to 8S battery configurations, features a 0.6A active balancing current, and a continuous charge/discharge current of 100A. It integrates comprehensive protection functions and offers smart monitoring capabilities via Bluetooth-enabled mobile applications and PC software.

JIKONG JKBMS Model JK-BD6A8S10P with key specifications
Figure 1: JIKONG JKBMS Model JK-BD6A8S10P with key specifications: BT/Display function, Battery BMS type, 0.6A balancing current, 4S-8S battery strings, 100A charge/discharge, Li-ion/Lifepo4/LTO battery type.

2. Package Contents

Please verify that all items are present in your package:

  • 1 x JIKONG BMS Unit
  • 1 x Sampling Line (approx. 70cm long)
  • 1 x NTC Temperature Sensor (approx. 40cm long)
  • 1 x Switch Key (approx. 50cm long)
JIKONG BMS Packing List
Figure 2: Contents of the JIKONG BMS package.

3. Specifications

The JIKONG JKBMS offers robust performance and protection features. Below are the detailed specifications for various models, including the JK-BD6A8S10P.

Table 1: JIKONG Product Specifications Overview
Technical Index JK-B1A8S10P JK-B1A8S20P JK-B2A8S20P JK-B2A8S30P
Number of Battery Strings (Li-ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (LiFePO4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.3mΩ
Continuous Discharge Current100A200A200A300A
Continuous Charge Current100A200A200A300A
Maximum Discharge Current (MAX 2min)200A300A300A400A
Over Charge Protection Current (ADJ)10-100A (Adjustable)
Other Interfaces (Customized)RS485, CANBUS HEAT
Size/mm (JK-B1A8S10P, JK-B1A8S20P, JK-B2A8S20P)153*126*18mm
Size/mm (JK-B2A8S30P)189*94*24mm
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1 Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android, iOS
JIKONG Product Specifications Table
Figure 3: Detailed technical specifications for various JIKONG BMS models.

Note: The data tolerance range is ±2mm for dimensions.

Dimensions:

  • JK-B1A8S10P: 105mm (L) x 87mm (W) x 17.6mm (H)
  • JK-B2A8S30P: 189mm (L) x 94mm (W) x 24mm (H)
  • JK-B1A8S20P / JK-B2A8S20P: 153mm (L) x 126mm (W) x 18mm (H)
Product Dimensions for JK-B1A8S10P
Figure 4: Dimensions for JIKONG BMS Model JK-B1A8S10P.
Product Dimensions for JK-B2A8S30P
Figure 5: Dimensions for JIKONG BMS Model JK-B2A8S30P.
Product Dimensions for JK-B2A8S20P and JK-B1A8S20P
Figure 6: Dimensions for JIKONG BMS Models JK-B2A8S20P and JK-B1A8S20P.

4. Installation and Wiring

Proper installation and wiring are crucial for the safe and correct operation of your JKBMS. Follow these steps carefully:

  1. Connect all balance cables to the battery cells, ensuring correct polarity and sequence.
  2. Insert the balance cable connector into the designated port on the BMS.
  3. Connect the B- line (negative terminal of the battery pack) to the B- terminal on the BMS.
  4. Connect the P- line (negative terminal for load/charger) to the P- terminal on the BMS.
  5. Connect the C- line (negative terminal for charger only, if using separate charge/discharge ports) to the C- terminal on the BMS. (Note: This model uses a common port for charge and discharge, so C- and P- might be combined or C- might be for charging only depending on the specific variant).
  6. Connect the positive terminal of the battery pack (P+) to the positive terminals of your load (motor, inverter) and charger.

Wiring Method for 8-String Cells:

Wiring Diagram for 8-String Cells
Figure 7: Detailed wiring diagram for an 8-string battery configuration.

Wiring Method for 4-String Cells:

Wiring Diagram for 4-String Cells
Figure 8: Detailed wiring diagram for a 4-string battery configuration.

WARNING: Incorrect wiring can cause damage to the BMS, battery, and connected devices. Always double-check connections before applying power.

5. Operation

The JIKONG JKBMS offers intelligent interaction and easy operation through its dedicated mobile app and PC software. These tools allow you to monitor battery status, adjust protection parameters, and view real-time data.

Mobile App and PC Software:

  • The 'JIKONG SMART BMS' mobile app supports iOS, Android, and HarmonyOS systems.
  • The app and PC software allow you to view multiple information such as voltage, current, temperature, State of Charge (SOC), and cycle count.
  • You can freely adjust protection values for overcharge, over-discharge, overcurrent, and temperature. Refer to the internal parameters of the protection board before making changes.
Multi-screen Display and Data Connection
Figure 9: Mobile app, PC software, and dedicated display for monitoring JKBMS data.

6. Key Features

  • Active Balancing (Lossless Balancing): Achieved through energy transfer, moving energy from cells with higher energy to those with lower energy, ensuring voltage balance with minimal energy loss. This process operates continuously, extending battery lifespan and improving stability.
  • Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection to safeguard your battery pack.
  • Rich Interface Options: Supports various communication modes such as CAN, RS485, Bluetooth (BT), NTC (temperature sensor), Soft Switch, SOC Indicator, Key Switch, and Active Equalizer.
  • High-Quality Construction: Features a fully aluminum alloy shell for superior heat dissipation and robust protection against external environmental damage to electronic components.
  • Wide Application: Suitable for power lithium batteries, storage lithium batteries, outdoor batteries, and various applications including E-bikes, electric tricycles, forklifts, industrial drones, and RV energy storage.
Active Balancing Technology
Figure 10: Illustration of JIKONG's intelligent active balancing technology.
Rich Interface Options
Figure 11: Various communication interfaces supported by the JIKONG BMS.
Aluminum Alloy Shell Design
Figure 12: The fully aluminum alloy shell provides superior heat dissipation and protection.
Wide Application Scenarios
Figure 13: Examples of wide application scenarios for the JIKONG BMS.

7. Maintenance

The JIKONG JKBMS is designed for durability and minimal maintenance. However, following these general guidelines can help ensure its longevity:

  • Keep the BMS clean and free from dust and debris.
  • Ensure proper ventilation around the unit to facilitate heat dissipation, especially during high current operation.
  • Regularly check all wiring connections for tightness and signs of corrosion.
  • Avoid exposing the BMS to extreme temperatures or moisture.
  • Periodically check the battery cell voltages via the app to ensure balancing is functioning correctly.

8. Troubleshooting

If you encounter issues with your JIKONG JKBMS, consider the following general troubleshooting steps:

  • No Power/No Display: Check all power connections, especially the main battery connections (B- and P+). Ensure the switch key is in the ON position if applicable.
  • Balancing Issues: Verify that all balance wires are correctly connected to each cell and are not damaged. Check cell voltages via the app to identify any significantly unbalanced cells.
  • Over-protection Triggered: If the BMS frequently triggers overcharge, over-discharge, or overcurrent protection, review your battery parameters and load requirements. Ensure the BMS settings in the app are appropriate for your battery type and usage.
  • Bluetooth Connectivity Problems: Ensure the BMS is powered on and within range. Restart your mobile device and the BMS. Check app permissions for Bluetooth access.

For more complex issues or persistent problems, please contact JIKONG customer support.

9. User Tips

  • Initial Setup: Before connecting the main power, always connect the balance wires first, starting from the lowest cell voltage (B0) upwards. Disconnect in reverse order.
  • Parameter Adjustment: When adjusting protection parameters via the app, make small, incremental changes and monitor the battery behavior closely. Consult the detailed specifications to understand safe operating limits.
  • Firmware Updates: Periodically check the JIKONG official website or app for any available firmware updates to ensure optimal performance and access to new features.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the JIKONG Official Store or your authorized dealer. Ensure you have your product model number (JK-BD6A8S10P) and purchase details available when seeking support.

JIKONG BMS Accessories:

A range of accessories is available to enhance your JKBMS experience, including various display units and communication modules.

JIKONG BMS Accessories
Figure 14: Available JIKONG BMS accessories including displays and interface boards.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.