1. Safety Warnings
Before using this product, please read and comply with all safety instructions:
1.1 General Safety
- Do not use in humid environments.
- Avoid direct sunlight, high temperatures, and dusty environments.
- Keep the ventilation good and do not block any heat dissipation holes (if applicable).
1.2 Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product exhibits any unusual behavior, discontinue use and contact after-sales service.
2. Setup
2.1 Unpacking Inspection
After opening the package, please check that all items are complete:
- 1 x VK-5 CW Key
- 1 x 3.5mm Connection Cable
- 2 x Hex Wrenches
- 4 x Foot Pads
If you find any items missing or damaged, please contact us immediately.
2.2 Initial Connection
The XIEGU VK-5 CW key features a standard 3.5mm audio interface for connection. Simply plug the provided 3.5mm connection cable into the port on the key and the corresponding input on your shortwave radio or transceiver. This is a plug-and-play connection.
2.3 Adjusting Contact Gap
The contact gap of the key is adjustable to suit your preferred sending habits. Use the provided hex wrenches to adjust the screws that control the contact points. A properly adjusted gap ensures smooth operation and sensitive response.
3. Operating Instructions
3.1 Basic Operation
The XIEGU VK-5 is a manual straight key designed for sending Morse code. To operate, simply press down on the key's lever to make contact and send a 'dit' or 'dah' signal, depending on the duration of the press. Release the lever to break contact.
The key's heavy-duty design (approximately 381g) ensures stability during operation, preventing unwanted movement.
4. Maintenance and Care
- Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
- Storage: When not in use for an extended period, clean and store in a cool, dry place.
5. Troubleshooting Common Problems
| Problem | Possible reasons | Solution |
|---|---|---|
| No signal output | Poor connection to radio/transceiver | Check the 3.5mm cable connection to both the key and the radio. Ensure the radio is configured correctly for CW input. |
| Inconsistent keying/missed characters | Contact gap too wide or too narrow; dirty contacts | Adjust the contact gap using the hex wrenches. Clean the contact points if necessary. |
| Key moves during operation | Key not stable on surface; missing foot pads | Ensure all four foot pads are attached to the base. Place the key on a stable, flat surface. |
6. Specifications
| Parameter | Value |
|---|---|
| Model | VK-5 |
| Product Dimensions (L x W x H) | 176.8 x 62 x 60mm (approx.) |
| Net Weight | 381g (approx.) |
| Output Interface | 3.5mm Audio Jack |
| Body Material | Aluminum Alloy |
| Operating Temperature | -10℃ ~ 40°C |
| Storage Temperature | -20℃ ~ 60°C |
| Protection Level | IP20 (for indoor use) |
| Authentication Information | CE, RoHS Compliant with EU directives |
7. Warranty and Support
7.1 Warranty Policy
The product comes with a 12/24 month warranty from the date of purchase (subject to store announcement).
7.2 Technical Support
For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email:
Email: alisupport2026@163.com
Response time: Reply within 24 hours (working days).
8. EU Compliance Information
8.1 CE Declaration of Conformity
This product complies with the essential requirements of the following EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- RoHS Directive 2011/65/EU
8.2 Waste Disposal (WEEE)
The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste and must be collected and recycled separately.
9. Disclaimer
This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.