SVBONY MK90/MK105/MK127

Contents

SVBONY MK90/MK105/MK127 Maksutov-Cassegrain Telescope User Manual

Portable Grab-and-Go Design for Lunar, Planetary, and Nebula Observation

1. Preface

Thank you very much for purchasing the SVBONY astronomical telescope. This manual provides instructions for the MK series Optical Tube Assemblies (OTA), including models MK90, MK105, and MK127.

1.1. Precautions

  • WARNING: Never look directly at the sun with the telescope or its finder or guide scope. Permanent and irreversible eye damage may result. Use a proper solar filter firmly mounted on the front of the telescope for viewing the sun. When observing the sun, place a dust cap over your finder scope or remove the finder scope to protect you from accidental exposure. Never use an eyepiece-type solar filter and never use your telescope to project sunlight onto another surface; the heat inside can damage the optics of the telescope.
  • CAUTION: Do not leave the optical tube uncapped in the daytime. Sunlight passing through the telescope or finder scope may cause a fire.
  • Do not use the product while moving or walking, as injuries could result from a collision with objects or from stumbling or falling.
  • Keep small caps, plastic bags, or plastic packing materials away from children. These may pose a danger of swallowing or suffocation.
  • Do not use the product in a wet environment and do not handle with wet hands.

1.2. Handling and Storage

  • Do not leave the product inside a car in bright sunshine or in other hot places. Keep any strong heat sources away from the product.
  • When cleaning, do not use solvents such as paint thinner or similar products.
  • Do not expose the product to rain, water, dirt or sand.
  • Avoid touching any lens or mirror surfaces directly with your hands. In case a lens or mirror becomes dirty with fingerprints or general smears, gently wipe it using a commercially available lens cleaner and a lens cleaning paper or cloth.
  • Blow off dust on lenses using a commercially available blower brush. Do not use compressed air.
  • Store the product in a dry place away from direct sunlight.

2. Product Introduction

The SVBONY MK series Maksutov-Cassegrain telescopes are designed for high-precision astronomical observation, offering clear and crisp views of celestial objects.

SVBONY MK90, MK105, MK127 Maksutov-Cassegrain Telescopes

Figure 2.1: SVBONY MK Series Telescope Lineup

2.1. Key Features

  • Separate Secondary Mirror Maksutov-Cassegrain Optics: Enhances contrast in the imaging of target objects. Features a meniscus corrector lens (FMC), multi-coated precision aluminum coating on the primary mirror, and 99% reflectivity dielectric coatings on the separate secondary mirror.
  • Separate Secondary Mirror Maksutov-Cassegrain Optics Diagram

    Figure 2.2: Optical Diagram of Maksutov-Cassegrain Optics

  • Dual-Speed Focusing: Provides high-precision adjustment, enhanced observational efficiency, quick adaptation to different fields of view, and improved image quality. The coarse focus knob enables rapid movement for rough focus, while the fine focus knob allows for minute adjustments for optimal image clarity.
  • Dual-Speed Focusing Mechanism

    Figure 2.3: Dual-Speed Focuser Design

  • Sharpened Image Contrast: Ideal for traditional planetary photography and capturing intricate details of small nebulae and star clusters, thanks to 99% high-reflective dielectric coating and high-index coating that reduces reflections and glare.
  • Sharpen Image Contrast with 99% High-Reflective Dielectric Coating

    Figure 2.4: Image Contrast Enhancement

  • Versatile Application Range: Suitable for observing objects like the Moon, Jupiter, Saturn, Monkey Head Nebula, Crab Nebula, Needle Galaxy, Dumbbell Nebula, Ring Nebula Lyra, M13, M81/82, and M42.
  • Versatile Application Range for Astronomical Observation

    Figure 2.5: Examples of Observable Celestial Objects

  • No Need for Periodic Collimation: The Maksutov-Cassegrain design, which uses a convex meniscus lens instead of a conventional corrector plate, results in a smaller secondary mirror, limiting obstruction and increasing contrast, while eliminating the need for frequent collimation.
  • Maksutov-Cassegrain vs Schmidt-Cassegrain Collimation

    Figure 2.6: Collimation Comparison

  • Conical Extinction Tube: Designed for stray light elimination, improving image quality.
  • Conical Extinction Tube for Stray Light Elimination

    Figure 2.7: Conical Extinction Tube

  • Internal Blackening and Matting Process: Further reduces internal reflections for clearer views.
  • Internal Blackening and Matting Process

    Figure 2.8: Internal Blackening

  • Compact and Portable: A perfect transportable, grab-and-go telescope, easy to pack in a bag, and with its sturdy metal construction.
  • Compact and Portable Telescope

    Figure 2.9: Compact Design

2.2. Components Overview

The MK series telescopes consist of the following main components:

  • Tube Assembly: The main body of the telescope.
  • Simple Dovetail Mount Slot for Finder Scope: For attaching a finder scope. MK105 offers two slots.
  • Meniscus Corrector Lens: Front optical element.
  • Dovetail Plate: For mounting the telescope to a tripod or equatorial mount.
  • Single-Speed Focus Knob (MK90, MK105) / Dual-Speed Focus Knob (MK127): For adjusting focus.
  • Eyepiece Holder: For inserting eyepieces or cameras.
Focuser, Compression Ring, M42x0.75 Thread, 1.25-inch Interface details

Figure 2.10: Detailed View of Focuser and Interfaces

2.3. Package Contents (Example for MK127)

MK127 Package Contents

Figure 2.11: Example Package Contents for MK127

The package typically includes:

  • Maksutov-Cassegrain OTA (1 unit)
  • 0.65x Focal Reducer (1 unit, for MK127)
  • SCT to -2" Mount Adapter (1 unit)
  • SCT to 1.25" Mount w/T Adapter (1 unit)
  • 1.25-inch Dust Plug (1 unit)
  • Metal Objective Lens Cover (1 unit)
  • User Manual (1 unit)
  • Versatile Dovetail Mounting Base (2 units)
  • Vixen Style Dovetail Plate-210mm (1 unit)
  • Screws

3. Setup

3.1. Attaching the Telescope to Your Mount

The telescope is an Optical Tube Assembly (OTA) and requires a separate mount (e.g., equatorial mount, alt-azimuth mount, or sturdy photographic tripod) for stable operation. The telescope features a Vixen-style dovetail plate and dual dovetail mounting bases for versatile attachment.

MK105 Telescope Mounted on a Tripod

Figure 3.1: Illustration of Telescope Mounted on a Tripod

To attach the telescope:

  1. Ensure your mount is stable and securely set up.
  2. Align the dovetail plate on the telescope with the dovetail clamp on your mount.
  3. Slide the telescope into the clamp and tighten the locking screws on the mount to secure it.

3.2. Attaching the Finder Scope (Optional Accessory)

A finder scope helps in locating objects in the night sky. To attach it:

  1. Loosen the finder bracket locking screw on the telescope's dovetail mount slot.
  2. Slide the finder scope bracket into the dovetail mount slot.
  3. Tighten the finder bracket locking screw securely.
Attaching a Finder Scope to the Telescope

Figure 3.2: Attaching the Finder Scope

3.3. Planetary Photography Solution (Example for MK127)

For planetary photography, you can combine the MK127 with accessories like the SV605CC camera, SV154, and SV905C. This setup allows for capturing detailed images of planets.

Planetary Photography Setup with MK127

Figure 3.3: Planetary Photography Solution

3.4. Visual Observation Collocations (Example for MK105)

For visual observation, the MK105 can be paired with a SV182 90° Finder scope, SV188P Diagonal, and SV207 Planetary Eyepiece for an enhanced viewing experience.

Visual Observation Setup with MK105

Figure 3.4: Visual Observation Collocations

4. Operating the Telescope

4.1. Focusing

To achieve a sharp image, slowly turn the focus knobs under the focuser. The image usually requires fine refocusing over time due to small variations caused by temperature changes or flexures. This is especially true for short focal ratio telescopes. Refocusing is almost always necessary when changing eyepieces or adding/removing Barlow lenses.

The MK127 model is equipped with a dual-speed focusing mechanism, which makes the focusing process relatively lighter and quicker compared to single-speed focusers on MK90 and MK105.

4.2. Visual Configuration Magnification

The magnification of the telescope is determined by dividing the focal length of the telescope by the focal length of the eyepiece. When using an eyepiece with a short focal length (small number in millimeters), the image will be dimmer, and the range of sharp focus will be smaller. It is recommended to begin with an eyepiece with a longer focal length for easier initial focusing.

4.3. Photographic Configuration

The telescope can be configured for photography using various accessories. This typically involves connecting a camera (DSLR, CCD/CMOS) via T-rings, eyepiece projection adapters, or T-1.25" adapters.

Photographic Configuration Diagram

Figure 4.1: General Photographic Configuration

Note: Some optional accessories shown in this chart will be needed if you take pictures with an SLR camera, digital camera, or CCD video camera.

Video 4.1: SVBONY MK127 Product Overview and Setup Example

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your telescope. Refer to the Handling and Storage section (1.2) for general care instructions.

5.1. Cleaning Optics

  • Avoid touching lens or mirror surfaces directly with your hands.
  • For fingerprints or general smears, gently wipe with a commercially available lens cleaner and lens cleaning paper or cloth.
  • Use a commercially available blower brush to remove dust. Do not use compressed air.

6. Troubleshooting: Collimation

Collimation is the process of aligning the optical elements of your telescope. While Maksutov-Cassegrain telescopes generally require less frequent collimation, it may be necessary if images appear distorted or misaligned.

6.1. How to Collimatethe Optical Axis

  1. Preparation: Remove the diagonal and eyepiece. Look into the rear opening of the tube (also remove the dust cover from the front). Perform this indoors, with the telescope pointed at a white wall in a well-lit room. Try to keep your eye centered with respect to the rear opening of the tube. A collimating eyepiece is highly recommended to aid in centering your eye.
  2. Identify Misalignment: Look into the rear opening. If your telescope is out of collimation, you will see a black crescent shape (Figure 6.1a). A properly collimated scope will show a concentric view (Figure 6.1b).
  3. Collimation Diagram: Misaligned (a) vs Aligned (b)

    Figure 6.1: Collimation View (a) Misaligned, (b) Aligned

  4. Adjusting Screws: Remove the 3 plastic screw covers on the rear cell. There are 3 sets of hex head screws, each including a push screw and a pull screw. These screws tilt the mirror cell. When adjusting one screw, the other five screws must also be adjusted to maintain proper pressure on the mirror cell. Make slight adjustments (no more than a 1/4 turn) to change the alignment of the primary mirror.
  5. Collimation Screw Diagram

    Figure 6.2: Collimation Screws (Push/Pull)

  6. Locate Alignment Screw: Determine the direction the front of the telescope needs to move to correct the misalignment. Then, locate the alignment screw on the back of the telescope that corresponds to that direction.
  7. Check Screw Tension: Before making adjustments, check if any screws are loose, especially the push screws. Ensure all screws are neither too loose nor too tight.
  8. Final Check: After adjusting, perform a star test to verify collimation. If the telescope appears collimated after the star test, it should not need further adjustment unless roughly handled.

7. Specifications for MK Series Products

Product Comparison Table for MK90, MK105, MK127

Figure 7.1: Product Comparison Table

MK Series Telescope Specifications
FeatureMK90MK105MK127
Optical ConfigurationTwo-Element Maksutov-Cassegrain Optical SystemTwo-Element Maksutov-Cassegrain Optical SystemThree-Element Maksutov-Cassegrain Optical System
Aperture (MM)90105127
Focal Length (MM)125013651500
Focal Ratiof/13.9f/13f/11.8
CoatingAluminum CoatingHigh-Reflectivity Dielectric CoatingHigh-Reflectivity Dielectric Coating
Meniscus Corrector Lens CoatingAR CoatingAR CoatingAR Coating
Surface Figure Accuracy1/4λ1/4λ1/4λ
Material6061T Aluminum Extrusion6061T Aluminum Extrusion6061T Aluminum Extrusion
Surface Treatment ProcessBaked Paint FinishBaked Paint FinishBaked Paint Finish
ColorGunmetal grayGunmetal grayGunmetal gray
Internal Extinction ProcessSpraying Matt PaintSpraying Matt PaintSpraying Matt Paint
Interface Sizes1.25-inch1.25-inch2-inch
Focusing AccuracySingle-Speed FocusingSingle-Speed FocusingDual-speed focusing
Dovetail Plate TypeVixen TypeVixen StandardVixen Type
Quantity of Simple Dovetail SlotsSimple Dovetail Slot x1PCSSimple Dovetail Slot x1PCSSimple Dovetail Slot x2PCS
Whether a flat field reducer is included as standard equipmentNoNoYes

8. User Tips

  • Consider a focal length reducer to effectively have two telescopes in one, offering more versatility for different observations.
  • Basic knowledge of astronomy and telescope operation is helpful for advanced users to fully utilize the telescope's capabilities.
  • The compact dimensions and excellent optical performance make these telescopes exemplary for portable use.
  • You have the flexibility to choose between 2-inch and 1.25-inch eyepieces and focusing prisms, or combine both, depending on your specific needs and existing equipment.
  • These telescopes are considered excellent budget-friendly options for planetary observation.
  • The quality is often described as premium, especially considering the price, making them highly recommended.
  • The compact design provides clear views and is well-made, offering wonderful possibilities for astronomical enthusiasts.
  • The product is typically well-packaged, ensuring it arrives without damage.

9. Frequently Asked Questions (FAQ)

Q: Does the telescope include the mount shown in the video/images?
A: No, the SVBONY MK series telescopes are Optical Tube Assemblies (OTAs) only. The mount, tripod, and eyepieces are typically sold separately and need to be purchased according to your specific needs.
Q: What lenses does it have?
A: As a Maksutov-Cassegrain telescope, it primarily uses mirrors (primary and secondary) and a meniscus corrector lens. Eyepieces, which determine magnification, are usually purchased separately to suit individual preferences.

10. Warranty and Support

10.1. Warranty Information

SVBONY offers a Lifetime Warranty for its products. This includes a 1-year free replacement and lifetime warranty. Shipping costs for warranty claims are typically paid by the buyer.

10.2. Customer Support

For any inquiries or support, you can contact SVBONY customer service. Emails are typically answered within 24 hours.

10.3. Additional Resources

A detailed user manual in PDF format is available for download. You can access it here.

10.4. Regulatory Compliance

US FCC requirements: This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by reorienting the antenna, increasing separation, or connecting to a different circuit.

European CE requirements: Hong Kong Svbony Technology Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.svbony.com.

Disposal: The crossed-out wheeled-bin symbol indicates that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws and rules in your area.

Electromagnetic Interference/Compatibility: Nearly every electronic device is susceptible to electromagnetic interference (EMI). During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so, such as hospitals or healthcare facilities.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.