SAPPHERO SO2111 Men's Watch User Manual

Introduction

Thank you for choosing the SAPPHERO SO2111 Men's Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.

The SAPPHERO SO2111 is a sophisticated quartz wristwatch featuring a chronograph function, date display, luminous hands, and 5ATM water resistance, all encased in durable stainless steel with a Hardlex crystal.

Product Overview

Your SAPPHERO SO2111 watch combines elegant design with robust functionality. Key features include:

• 50M Water Resistance (5ATM): Suitable for daily use, showering, and swimming.
• High Hardness Mineral Glass: Provides excellent scratch resistance for the dial window.
• Stainless Steel Strap: Durable and stylish for everyday wear.
• Luminous Effect: Hands and markers glow in the dark for visibility in low-light conditions.

Specifications

Setup

1. Unboxing

Your SAPPHERO SO2111 watch comes in a professional waterproof gift box. Inside, you will find:

• The SAPPHERO SO2111 Watch
• Gift Box
• Strap Adjustment Tool
• Instruction Manual (this document)

2. Strap Adjustment

The stainless steel strap can be adjusted to fit your wrist using the included strap adjustment tool. Follow these steps:

1. Identify the pins on the side of the strap links.
2. Place the strap in the adjustment tool with the pin facing the tool's pusher.
3. Carefully push the pin out to remove links until the desired length is achieved.
4. Reinsert the pins to secure the links. Ensure they are fully seated.

If you are unsure, it is recommended to seek professional assistance for strap adjustment.

3. Setting Time and Date

To set the time and date on your watch:

1. Setting the Date: Gently pull the crown out to the first click position. Rotate the crown clockwise or counter-clockwise until the correct date is displayed.
2. Setting the Time: Pull the crown out further to the second click position. Rotate the crown to move the hour and minute hands until the correct time is displayed. Push the crown back in to the normal position to start the watch.

Operating Instructions

1. Time Display

The watch displays time using hour, minute, and second hands. The 24-hour subdial indicates the current hour in a 24-hour format.

2. Date Display

The date is displayed in a small window on the dial. Adjust as needed at the end of months with fewer than 31 days.

3. Chronograph Function (Stopwatch)

Your SAPPHERO SO2111 watch features a fully functional chronograph. The subdials measure elapsed seconds and minutes.

1. Start: Press the top pusher button to start the chronograph. The chronograph second hand will begin to move.
2. Stop: Press the top pusher button again to stop the chronograph. The elapsed time will be displayed on the subdials.
3. Reset: Press the bottom pusher button to reset the chronograph. The chronograph hands will return to their zero positions. Note that the chronograph hands reset by moving backward to zero.

4. Luminous Hands

The watch hands and markers are treated with a luminous material. After exposure to light, they will glow in the dark, allowing for time reading in low-light conditions.

Maintenance

1. Water Resistance (5ATM / 50 Meters)

Your watch is water-resistant to 5ATM (50 meters), meaning it can withstand splashes, rain, showering, and swimming in shallow water. However, it is NOT suitable for hot water activities (like hot showers or saunas) or deep-sea diving. Always ensure the crown is fully pushed in before exposing the watch to water.

2. Cleaning

To maintain the appearance of your watch:

• Wipe the case and strap regularly with a soft, dry cloth.
• For stubborn dirt on the stainless steel, a slightly damp cloth can be used, followed by immediate drying.
• Avoid using chemical cleaners, as they may damage the watch's finish.

3. Crystal Care

The Hardlex mineral glass is highly scratch-resistant but not entirely scratch-proof. Avoid direct impact or abrasive surfaces to prevent damage.

4. Battery Replacement

The watch is powered by a quartz movement with an included battery. When the battery runs out, it is recommended to have it replaced by a qualified watch technician to ensure proper sealing and water resistance.

5. Storage

When not wearing your watch, store it in its original box or a soft pouch to protect it from dust and scratches.

Troubleshooting

• Watch not running: Ensure the crown is fully pushed in. If it still doesn't run, the battery may need replacement.
• Time or Date is incorrect: Refer to the 'Setting Time and Date' section to re-adjust.
• Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and contact support.
• Strap too loose/tight: Use the provided tool to adjust the strap length as described in the 'Strap Adjustment' section.
• Chronograph hands not resetting to zero: Press the bottom pusher firmly. If the issue persists, it may require professional adjustment.

User Tips

• Many users appreciate the watch's quality and appearance, noting it looks even better than pictured.
• The watch has a good weight, contributing to a premium feel.
• The chronograph is fully functional, including minute, second, and 24-hour subdials.
• The included strap adjustment tool is effective for customizing the fit, even for smaller wrists.
• Be aware that the chronograph reset function causes the hands to move backward to their zero positions, which is normal operation for this model.

Warranty & Support

Your SAPPHERO SO2111 watch comes with a 12-Month Warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage resulting from improper use, accidents, unauthorized repairs, or normal wear and tear.

For warranty claims or technical support, please refer to the contact information provided by your retailer or the official SAPPHERO support channels.

Frequently Asked Questions (FAQ)

Q: Can the bracelet be changed to a silicone strap?

A: Yes, the bracelet can be changed to a silicone strap or other compatible straps. Ensure the replacement strap has a lug width of 22mm to fit correctly.