Halnziye HY-P17

Contents

Halnziye HY-P17 Extreme Thermal Grease Instruction Manual

Premium Performance Thermal Paste for All Processors (CPU/GPU)

1. Introduction

The Halnziye HY-P17 Extreme Thermal Grease is a high-performance thermal paste designed to enhance heat dissipation for various high-power devices, including CPU chipsets, GPU chipsets, liquid cooling systems, and high-end servers. This manual provides essential information for the proper use, application, and maintenance of your HY-P17 thermal grease to ensure optimal thermal management.

Halnziye HY-P17 Extreme Thermal Grease product packaging
Figure 1: Halnziye HY-P17 Extreme Thermal Grease product packaging.

2. Specifications

The HY-P17 thermal grease features a new formula with excellent performance and high thermal conductivity. Key specifications are detailed below:

AttributeValue
Model NumberHY-P17
ColorGray
Net Weight Options2g, 4g
Specific Gravity2.68g/ml
Thermal Conductivity17.3 W/m-k
Working Temperature-20°C to 130°C
Chemical ConcernsNone
Halnziye HY-P17 2g thermal grease syringe with specifications
Figure 2: HY-P17 2g Thermal Grease with detailed specifications.
Halnziye HY-P17 4g thermal grease syringe with specifications
Figure 3: HY-P17 4g Thermal Grease with detailed specifications.

3. Package Contents

Your Halnziye HY-P17 Extreme Thermal Grease package typically includes the following items:

  • HY-P17 Thermal Grease syringe (2g or 4g, depending on your selection)
  • Grease Cleanser (for preparing surfaces)
  • Spatula (for even application)
Halnziye HY-P17 thermal grease kit including syringe, grease cleanser, and spatula
Figure 4: Typical package contents of the HY-P17 thermal grease kit.

4. Setup and Application

Proper application of thermal grease is crucial for effective heat transfer. Follow these steps for optimal results:

  1. **Preparation**:
    • Ensure your CPU/GPU and heatsink surfaces are clean and free of any old thermal paste, dust, or debris. Use the provided grease cleanser or isopropyl alcohol and a lint-free cloth for thorough cleaning.
    • Allow surfaces to dry completely before proceeding.
  2. **Application Method**:
    • For CPUs, apply a small pea-sized dot of thermal grease to the center of the CPU's integrated heat spreader (IHS).
    • For GPUs or other chips, a thin line or multiple small dots may be more suitable, depending on the die size.
    • Alternatively, you can use the provided spatula to spread a very thin, even layer across the entire surface of the CPU/GPU IHS. Avoid applying too much, as this can hinder performance.
  3. **Heatsink Installation**:
    • Carefully place the heatsink onto the CPU/GPU, ensuring it is aligned correctly.
    • Apply even pressure as you secure the heatsink with its mounting mechanism. The pressure will help spread the thermal paste evenly.
    • Avoid twisting or lifting the heatsink once it makes contact, as this can create air bubbles and reduce thermal performance.
Video 1: Demonstration of thermal paste application.

5. Operating Tips

  • **Initial Burn-in**: After applying new thermal paste, it is recommended to run your system under a moderate load for a few hours. This "burn-in" period can help the thermal paste settle and achieve its full thermal performance.
  • **Temperature Monitoring**: Use software to monitor your CPU/GPU temperatures, especially during demanding tasks, to ensure the thermal paste is performing as expected.
  • **Reapplication Frequency**: The lifespan of thermal paste can vary. It is generally recommended to reapply thermal paste every 1-3 years, or whenever you remove the heatsink for cleaning or upgrades.

6. Maintenance

  • **Storage**: Store the thermal grease syringe in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely closed to prevent drying out.
  • **Cleaning**: If you need to remove old thermal paste, use the provided grease cleanser or isopropyl alcohol (90% or higher concentration) and a lint-free cloth or cotton swabs. Gently wipe away the old paste until the surface is clean.
  • **Disposal**: Dispose of used thermal paste and cleaning materials according to local environmental regulations.

7. Troubleshooting

High Temperatures After Application:
  • **Incorrect Application**: Ensure the thermal paste was applied correctly and evenly. Too much or too little paste, or air bubbles, can reduce efficiency. Re-clean and reapply if necessary.
  • **Heatsink Mounting**: Verify that the heatsink is securely mounted and making full contact with the CPU/GPU. Uneven pressure can lead to poor thermal transfer.
  • **Fan/Pump Functionality**: Check if your CPU/GPU fan or liquid cooler pump is functioning correctly. Ensure fans are spinning and not obstructed by dust.
Thermal Paste Appears Dry/Cracked:
  • This indicates the thermal paste has reached the end of its effective lifespan or was exposed to air. It's time for reapplication.

8. User Tips

  • For best results, always clean both the CPU/GPU surface and the heatsink base thoroughly before applying new thermal paste.
  • A small amount goes a long way. Over-application can be counterproductive.
  • Consider watching a video tutorial for visual guidance on thermal paste application techniques if you are new to the process.

9. Warranty and Support

Halnziye HY-P17 thermal grease is manufactured to high-quality standards. For any product-related inquiries or support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

This product is intended for use as a thermal interface material. Misuse or improper application may void any implied warranties.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.