How do I change the status or mode from open to close on the Tuya GDS16 Smart Wi-Fi Garage Door Opener Module?

To change the status of your garage door from open to closed using the Tuya GDS16, you primarily use the Tuya Smart or Smart Life app. If the app is showing the incorrect status...

Tuya Smart WiFi Garage Door Opener Module User Manual

1. Introduction

The Tuya Smart WiFi Garage Door Opener Module (Model GDS16) allows you to remotely control your garage door using a smartphone app, voice commands, and set schedules. It integrates seamlessly with popular smart home platforms like Amazon Alexa, Google Home, and Yandex Alice, providing enhanced convenience and security for your home.

This manual provides detailed instructions for the installation, operation, and maintenance of your WiFi Garage Door Opener Module.

Tuya Smart WiFi Garage Door Opener Module overview with wiring, app, and smart home integrations. — Figure 1: Tuya Smart WiFi Garage Door Opener Module and its functionalities.

2. Package Contents

Please check the package for the following items:

WiFi Garage Door Module (GDS16)
Door Sensor (500cm / 196.85in cable)
Instruction Manual
Mounting Screws and Wall Plugs
Mounting Bracket
Cable Ties
Signal Cable (45cm / 17.72in)

Package contents of the WiFi Garage Door Opener Module. — Figure 2: Included components in the package.

3. Setup

3.1 Wiring Diagram

Follow the wiring diagram carefully to connect the module to your garage door opener and power supply. Ensure all connections are secure before powering on the device.

Detailed wiring diagram for the Tuya Smart WiFi Garage Door Opener Module, showing connections to the opener power head, wall button, and sensor cable. — Figure 3: Wiring connections for the module.

3.2 Installation Steps

Mount the Module: Choose a suitable location near your garage door opener and power outlet. Use the provided mounting bracket, screws, and wall plugs to secure the module.
Connect to Opener: Connect the signal cable from the module (S1, S2 terminals) to your garage door opener's power head. Refer to your garage door opener's manual for specific signal input terminals.
Connect Power: Connect the AC power (L, N terminals) to a 100-240V AC power source.
Install Door Sensor: Mount the two parts of the door sensor on your garage door and door frame, ensuring they are aligned and close enough to detect door status (open/closed). Connect the sensor cable (S3, S4 terminals) to the module.
Power On: Once all connections are made, power on the module.

Wiring diagram showing connections for the garage door opener module, including AC power, opener power head, and sensor cable. — Figure 4: Simplified wiring illustration.

3.3 App Download and Pairing

Download App: Download the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

Tuya GDS16