1. Product Overview
The SAPPHERO SO2110 is a stylish and functional men's quartz wristwatch, designed for business and daily wear. It features a durable stainless steel construction, a precise Seiko PC32 movement, and practical functions like date display and luminous hands.
2. Specifications
| Feature | Detail |
|---|---|
| Model Number | SO2110 |
| Movement | Seiko PC32 Quartz Movement |
| Case Material | Stainless Steel |
| Case Diameter | 43 mm |
| Case Thickness | 10 mm |
| Band Material | Stainless Steel |
| Band Length | 240 mm (8.66 inches) |
| Band Width | 22 mm |
| Clasp Type | Folding Clasp with Push Buttons |
| Dial Window Material | Hardlex Mineral Glass |
| Water Resistance | 5 ATM (50 meters) |
| Weight | 155 g |
| Features | Shock Resistant, Luminous Hands, Auto Date, Anti-Magnetic |
| Battery | Included |
3. Setup and Adjustment
3.1 Setting Time and Date
- To Set the Time: Pull the crown out to the second click position. Rotate the crown to move the hour and minute hands to the desired time. Push the crown back to the normal position.
- To Set the Date: Pull the crown out to the first click position. Rotate the crown clockwise or counter-clockwise (depending on the movement) to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the date change mechanism. Push the crown back to the normal position.
3.2 Adjusting the Stainless Steel Band
The watch comes with a stainless steel bracelet adjustment tool. To adjust the band length:
- Identify the pins on the inside of the watch band links.
- Use the provided tool to push out the pins in the direction of the arrows (usually found on the underside of the links) to remove excess links.
- Reinsert the pins to secure the adjusted band. Ensure all pins are fully seated to prevent the band from coming apart.
4. Operating Instructions
4.1 Basic Timekeeping
Once the time and date are set, the watch will operate continuously. The quartz movement ensures accurate timekeeping with minimal deviation.
4.2 Date Display
The watch features an automatic date display window. The date will advance once every 24 hours. If the watch stops, you may need to reset the date manually as described in Section 3.1.
4.3 Luminous Hands
The hands of the watch are equipped with luminous material, allowing for readability in low-light conditions. Exposure to light will charge the luminous elements.
4.4 Water Resistance (5 ATM / 50 Meters)
This watch is water-resistant up to 5 ATM (50 meters), making it suitable for daily use, such as accidental splashes, rain, and hand washing. It is not recommended for swimming, diving, or prolonged water immersion. Always ensure the crown is fully pushed in before any contact with water.
5. Maintenance
5.1 Cleaning
- Wipe the watch case and band regularly with a soft, dry cloth to remove dust and dirt.
- For stainless steel, a slightly damp cloth can be used, followed by a dry cloth.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and seals.
5.2 Battery Replacement
The watch is powered by a quartz movement and includes a battery. When the watch stops running, the battery will need to be replaced. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
5.3 Water Resistance Care
- Always ensure the crown is fully pushed in before exposing the watch to water.
- Avoid operating the crown or pushers while the watch is wet or submerged.
- Water resistance is not a permanent condition and may diminish over time due to wear and tear, impacts, or exposure to chemicals. It is advisable to have the water resistance seals checked periodically by a professional.
6. Troubleshooting
6.1 Watch Not Running
- Check the crown: Ensure the crown is fully pushed in. If it's pulled out, the watch will not run.
- Battery: If the watch has stopped completely, the battery may be depleted. Refer to Section 5.2 for battery replacement.
6.2 Date Not Changing
- Time setting: Ensure the time is set correctly, especially the AM/PM cycle. The date typically changes around midnight.
- Manual adjustment: If the date is stuck, try manually advancing it using the crown as described in Section 3.1.
6.3 Water Inside the Watch
If you notice condensation or water droplets inside the watch, it indicates a breach in the water resistance. Immediately take the watch to a professional watch repair service to prevent further damage to the movement.
7. User Tips
- Dial Color Variation: Be aware that the actual dial color may appear slightly different in person compared to product images due to lighting and screen variations.
- Band Adjustment: The included tool for band adjustment is very useful. Take your time when adjusting the links to ensure a comfortable fit.
- Back Cover Type: The watch features a snap-on back cover. While rated for 5 ATM water resistance, it's always best to exercise caution and avoid direct high-pressure water exposure.
- Battery Life: The watch comes with a battery included. If the watch is not running upon arrival, check if the crown is pushed in. If it still doesn't work, the battery might need replacement.
8. Warranty and Support
Your SAPPHERO SO2110 watch comes with a 12-Month Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.
For warranty claims, technical support, or any inquiries regarding your watch, please contact SAPPHERO customer service through your purchase platform. Please retain your proof of purchase for warranty validation.
9. Product Showcase Video
Watch this video for a visual overview of the SAPPHERO SO2110 watch and its features.