KING KONG X6pro

Contents

KING KONG X6pro LED Bicycle Light User Manual

Model: X6pro

1. Introduction

Thank you for choosing the KING KONG X6pro LED Bicycle Light. This high-performance front bike light is designed to enhance your cycling safety and visibility with its powerful illumination, intelligent features, and robust construction. It features a cut-off line design to prevent glare for oncoming traffic, a large capacity lithium battery that doubles as a power bank, and a durable, waterproof body.

KING KONG X6pro LED Bicycle Light mounted on a handlebar, highlighting USB Type-C, IPX6 waterproof rating, and quick release features.
KING KONG X6pro LED Bicycle Light with key features: USB Type-C, IPX6, and quick release.

2. Safety Information

  • Always ensure the light is securely mounted before riding.
  • Do not look directly into the light beam to avoid eye injury.
  • Adjust the light angle to prevent dazzling oncoming pedestrians or vehicles.
  • The lamp generates heat during operation; avoid direct contact with the lamp body for extended periods, especially at high brightness settings.
  • Keep out of reach of children.
  • Do not disassemble or modify the light, as this may void the warranty and pose safety risks.

3. Package Contents

Please check the package for the following items:

  • KING KONG X6pro LED Bicycle Light
  • Mounting Bracket (GoPro compatible)
  • Wireless Remote Control
  • Handlebar Bandage Mount
  • USB Type-C Charging Cable
Image showing the KING KONG X6pro bicycle light, its packaging, and included accessories: GoPro mount, wireless remote, and handlebar bandage mount.
X6pro Bicycle Light and its accessories.

4. Specifications

FeatureDetail
Model NumberX6pro-new
TypeHEADLIGHTS
Body MaterialAluminum alloy
Mounting PlacementHandlebar
Power SupplyBattery (5000mAh Lithium)
Lumen OutputUp to 2000LM
Waterproof LevelIPX5 (Note: Some images indicate IPX6, but product properties state IPX5. Refer to IPX5 for official rating.)
Intelligent SensingYes
Support Dimmer5 - 8 Files (modes)
Weight175g
Dimensions91mm (L) x 43mm (H) x 34mm (W)
CertificationCE, RoHS, pse

Luminous Flux Modes:

ModeLuminous Flux (L)Luminous Flux (M)Luminous Flux (H)
Low Beam200LM800LM1500LM
High Beam500LM1000LM2000LM
Caution Light1000LM (Quick)1000LM (Tardiness)-

Note: The running time may vary depending on external temperature and ventilation conditions.

Diagram showing the dimensions of the X6pro light and a table detailing luminous flux for Low beam, High beam, and caution light modes.
X6pro dimensions and luminous flux parameters.

5. Installation Guide

The KING KONG X6pro offers versatile mounting options for various handlebar types and preferences.

Mounting the Light:

  1. Choose your bracket: Select the appropriate bracket for your handlebar (e.g., FF60 bandage, FF20/FF30 plastic, round tube, or integrated handlebar mount). The light is also compatible with GoPro-style mounts.
  2. Secure the bracket: Attach the chosen bracket firmly to your bicycle's handlebar. Ensure it is centered and stable.
  3. Attach the light: Slide the X6pro bicycle light onto the bracket until it clicks securely into place. The light supports both hanging (under the handlebar) or vertical (on top of the handlebar) installation.
  4. Adjust angle: Adjust the light's angle to ensure optimal illumination of the road ahead without blinding others.
Diagrams illustrating various installation methods for the bicycle light, including hanging and vertical orientations, and different bracket types.
Various installation methods for the X6pro bicycle light.

6. Operating Instructions

Power On/Off:

  • The lamp has a built-in switch for direct control.
  • To turn on/off: Press the power button on the lamp body.
  • The lamp can be turned on and off freely using the lamp's button within two hours of standby after being turned off by the remote.

Remote Control Pairing:

The remote control is factory-matched. If re-pairing is needed:

  1. Turn on the bicycle lamp.
  2. Quickly press the switch on the lamp body three times. The indicator light on the lamp will turn yellow.
  3. Press the power-on button on the wireless remote control once to complete the pairing.
Hand operating the FL60 wireless remote control for the bicycle light and remote control mounted near a bike brake lever.
Operating the FL60 wireless remote control.

Changing Modes (Flashing/Constant-on):

To access advanced mode settings:

  1. With the lamp turned off, hold down the power-on button on the lamp body for five seconds.
  2. This will enter the five-mode setting, which includes two flashing modes and three constant-on modes. Cycle through them by pressing the button briefly.
Comparison of nighttime illumination: Left shows a wide 'High Beam' spread, Right shows a focused 'Low Beam' with a clear cut-off line.
Nighttime visibility with High Beam and Low Beam modes.
Comparison of bicycle light beams: Top shows the KING KONG light with a clear demarcation line and anti-glare. Bottom shows a generic light with scattered beam.
Professional optics offer an outstanding experience with clear demarcation line and anti-glare.

7. Charging and Power Bank Function

The X6pro features a 5000mAh lithium battery and a USB Type-C port for charging and external discharge.

Charging the Light:

  • Connect the provided USB Type-C cable to the light's charging port and to a USB power source (e.g., wall adapter, computer, power bank).
  • The light will indicate charging status (e.g., indicator light changes color).

Using as a Power Bank:

  • Connect your device (e.g., smartphone) to the light's USB Type-C port using a compatible cable.
  • The light can provide external discharge (up to 10W charging) to power or charge your devices.
The X6pro bicycle light connected via USB-C to charge a smartphone, demonstrating its 5000mAh power bank function with 10W charging.
X6pro functioning as a power bank to charge a smartphone.
Image showing the X6pro light with its USB-C port and battery status indicators (100%-30%, 30%-10%, 10%-0%).
Battery status indicators and external discharge capability.

8. Maintenance and Care

Cleaning:

  • Wipe the light body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure the USB port cover is securely closed to maintain waterproof integrity.

Water Resistance:

The X6pro is rated IPX5 (or IPX6 as per some images), meaning it is protected against low-pressure water jets from any direction. It is suitable for use in rainy conditions but should not be submerged in water.

Cyclists riding in the rain, showcasing the IPX6 waterproof capability of the bicycle light.
The X6pro light is designed to withstand rain (IPX5/IPX6).

9. Troubleshooting

Fog on the Lens:

Issue: Fog appears on the lens, especially in humid weather or sealed conditions.

Solution: This is a normal phenomenon and does not affect use. To resolve, open the USB cover and turn on the light. The moisture will evaporate within half an hour, or it will dissipate after a few uses.

Text explaining that fog on the lens due to humid weather and sealed conditions is normal and can be resolved by opening the USB cover and turning on the light.
Explanation regarding fog on the lens.

Overheating and Brightness Reduction:

Issue: The lamp feels hot, and brightness automatically reduces.

Explanation: It is normal for the bicycle lamp to generate heat. The X6pro has an intelligent temperature control system with NTC for precise temperature measurement. When the internal temperature reaches approximately 52 degrees Celsius, the lamp will automatically reduce brightness to cool down and protect its components. Once the temperature drops, the brightness will return to its previous level. This is a safety feature, not a malfunction.

Note for Remote Control Users: If the remote control is triggered while the light is in temperature-controlled reduced brightness, the temperature control will be temporarily released, and the lamp will maintain the higher brightness for one minute. After this minute, the temperature control will re-engage and reduce the brightness again if the temperature is still high.

10. User Tips

  • Remote Control Usage: The light can be used without the remote control by using the integrated switch on the lamp body. The remote offers convenience for changing modes and power on/off while riding.
  • Battery Life vs. Brightness: When using the remote control, be aware that overriding the automatic temperature reduction for higher brightness will consume battery faster. Balance brightness needs with desired battery life.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

© 2024 KING KONG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.