Introduction
This manual provides detailed instructions for the safe and effective use of your YTYIN 28000mAh Car Jump Starter. This device is designed to provide emergency starting power for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before first use and keep it for future reference.
Safety Information
WARNING: Improper use may result in damage to the device, vehicle, or personal injury.
- Always ensure the jump starter is adequately charged before use.
- Do not attempt to jump start a vehicle if the jump starter's battery level is critically low.
- Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of the car battery.
- Avoid short-circuiting the clamps.
- Do not expose the device to extreme temperatures outside the specified operating range (-40°C to +65°C).
- Keep out of reach of children.
- Do not disassemble the unit.
Package Contents
Please check the package for the following items:
- YTYIN Car Jump Starter Unit
- Smart Battery Clamps (Red and Black)
- Power Cable (for charging the jump starter)
- USB Cable (for charging external devices)
- Storage Package Box
Specifications
| Feature | Specification |
|---|---|
| Product Name | Car Emergency Start Power Supply |
| Battery Capacity | 28000mAh |
| Starting Current | 800A |
| Peak Current | 1000A |
| Voltage | 12 V |
| Input Port | 5V/2A |
| Output Port | 5V/2A, 12V |
| Applicable Temperature | -40°C to +65°C |
| Conversion Rate | 85%~90% |
| Number of Built-in Batteries | 4 |
| Special Features | USB Charging, Lighting, Cigarette Lighter Starter, Warning Light, SOS Lighting, One Way Fast Charge, Wireless Charging |
| External Testing Certification | CE |
| Vehicle Compatibility | All petrol cars low 6.0L, All diesel cars low 4.0L |
Setup and Initial Charge
Before using your YTYIN Car Jump Starter for the first time, it is essential to fully charge the device.
- Connect the provided power cable to the jump starter's input port (5V/2A).
- Plug the other end of the power cable into a suitable power source (e.g., wall adapter, car charger).
- The digital display will show the charging status. Charge until the display indicates 100% power.
- Once fully charged, disconnect the power cable.
The jump starter features a precision digital screen display for easy monitoring of the remaining power and output status.
Operating Instructions
Jump Starting a Vehicle
Follow these steps carefully to jump start your vehicle:
- Connect the Clips: Connect the red smart battery clamp to the positive (+) terminal of your car battery. Connect the black smart battery clamp to the negative (-) terminal of your car battery. The clamps are designed with an anti-reverse socket to prevent incorrect insertion.
- Turn on the Jump Starter: Check the battery power of the jump starter on its digital display. Plug the DO-Plug of the smart battery clamps into the DO socket on the jump starter.
- Start the Car: Ignite your car normally. Do not continuously crank the engine for more than 30 seconds at a time. If the car does not start after four attempts, the device will enter a protection mechanism. Wait for 10 minutes before attempting again.
- Remove the Jump Starter: Once the car has successfully started, remove the jump starter unit within 30 seconds. Then, carefully remove the battery clamps from the car battery, starting with the black (negative) clamp, followed by the red (positive) clamp.
Charging Electronic Devices
The jump starter can also function as a power bank for your electronic devices.
- USB Charging: Use the provided USB cable or your device's charging cable to connect to the jump starter's 5V/2A output port.
- Wireless Charging: For compatible smartphones, place the device on the designated wireless charging area of the jump starter. The jump starter supports Smart Life 10W, Android fast charge, and 7.5W Apple fast charge.
Using the LED/SOS Flashlight
The jump starter is equipped with a strong LED flashlight and an SOS lighting function for emergencies.
- Press the power button once to turn on the LED flashlight.
- Press again to cycle through different lighting modes (e.g., steady light, warning light, SOS signal).
- Press and hold to turn off the flashlight.
Maintenance and Storage
- Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
- Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the device clean by wiping it with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the smart battery clamps are clean and free of corrosion before and after each use.
Troubleshooting
- Device does not turn on:
- Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
- Car does not start:
-
- Check that the jump starter has sufficient power (at least 50% recommended).
- Verify that the smart battery clamps are correctly connected to the car battery terminals (red to positive, black to negative).
- Ensure the clamps are making good contact with the battery terminals.
- Do not crank the engine for too long; allow 30 seconds between attempts. If the protection mechanism activates after 4 attempts, wait 10 minutes.
- The car battery might be severely damaged and require professional assistance.
- Electronic devices are not charging:
-
- Ensure the jump starter is turned on and has sufficient power.
- Check the USB cable connection.
- For wireless charging, ensure your device is compatible and correctly placed on the charging pad.
User Tips
- Always keep the jump starter charged, especially before long trips or during cold weather.
- Familiarize yourself with the connection process before an emergency arises.
- The flashlight feature is useful for nighttime repairs or as a general utility light.
- Store the jump starter in an easily accessible location in your vehicle.
Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.