1. Introduction
Welcome to the SPERAX P1 Ultra-Modern Desk Treadmill. This manual provides essential information for the safe and efficient use of your new walking pad. Please read it thoroughly before operation and retain it for future reference. The SPERAX P1 is designed for convenient home use, offering both walking and vibration modes to enhance your fitness routine.
2. Important Safety Information
WARNING: To reduce the risk of serious injury, read all instructions before using this product.
- Always place the treadmill on a flat, stable surface.
- Keep children and pets away from the treadmill during operation.
- Consult a physician before starting any exercise program.
- Wear appropriate athletic footwear and clothing.
- The maximum user weight for standard operation is 120 kg (265 lbs). Do not exceed this limit.
- Ensure the power cord is not pinched or damaged.
- Do not use the treadmill if it is damaged or malfunctioning.
- Always step on and off the treadmill carefully.
- The treadmill is suitable for individuals aged 12-60 years old.
3. Package Contents
Upon unpacking, please ensure all items are present and in good condition:
- SPERAX P1 Walking Vibration Pad
- Remote Control (requires batteries, not included)
- Power Cable
- Instruction Manual (this document)
4. Setup and Assembly
- Unpack: Carefully remove the SPERAX P1 Walking Vibration Pad from its packaging.
- Placement: Place the walking pad on a firm, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space around the unit for safe operation.
- Power Connection: Connect the power cable to the treadmill and then to a suitable 110-240V AC power outlet.
- Remote Control: Insert the required batteries (not included) into the remote control. The remote is essential for operating the treadmill.
5. Operating Instructions
- Power On: Plug in the treadmill and press the power button on the unit or the remote control. The LED display will illuminate.
- Start Exercise: Step onto the walking pad. Using the remote control, press the START button. The treadmill will begin at a low speed.
- Adjust Speed: Use the '+' and '-' buttons on the remote control to increase or decrease the speed. The speed range is 0.2-3.8 mph (0.3-6 km/h).
- Select Mode: The SPERAX P1 features 4 distinct vibration modes. Use the 'MODE' button on the remote to cycle through these modes.
- Stop Exercise: To stop the treadmill, press the STOP button on the remote control. The belt will gradually slow down and stop.
- Power Off: After use, press the power button to turn off the unit and unplug it from the power outlet.
6. Maintenance and Storage
6.1 Cleaning
- Always unplug the treadmill before cleaning.
- Wipe down the surface of the treadmill with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Keep the display panel free from moisture.
6.2 Lubrication
Regular lubrication of the running belt is crucial for optimal performance and longevity. Refer to the specific instructions provided with your lubrication kit or contact customer support for guidance on proper lubrication procedures and frequency.
6.3 Storage
The SPERAX P1 features a foldable design for convenient storage. When not in use, you can store it upright against a wall or flat under furniture to save space.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Treadmill does not power on. | Power cable not connected, power outlet issue, remote control battery low. | Ensure power cable is securely plugged in. Check power outlet. Replace remote control batteries. |
| Running belt stops or slips. | Belt requires lubrication, belt tension is incorrect, motor overload. | Lubricate the running belt. Adjust belt tension (refer to specific instructions or contact support). Reduce user weight if exceeding capacity. |
| Unusual noises during operation. | Loose components, foreign objects under the belt, motor issue. | Inspect for loose parts and tighten if necessary. Check for and remove any foreign objects. If noise persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Walking Vibration Pad |
| Model | P1 |
| Product Size (L x W x H) | 988 x 528 x 89 mm |
| Running Area | 900 x 390 mm |
| Speed Range | 0.2 - 3.8 mph (0.3 - 6 km/h) |
| Vibration Modes | 4 Modes |
| Suitable Age | 12 - 60 years old |
| Gross Weight (G.W.) | 12 kg (27 lbs) |
| Net Weight (N.W.) | 10 kg (22 lbs) |
| Standard Bearing Capacity | 120 kg (265 lbs) |
| Ultimate Bearing Capacity | 150 kg (350 lbs) |
| Power | 400 W |
| Peak Power | 1000 W |
| Voltage | 110-240 V |
| Brand Name | SPERAX (XMSJ) |
| Certification | CE |
| Applicable Scene | Home Use, Gym, Commercial |
| Foldable | Yes |
| Heart Rate Test | Without |
| Function | Speed adjustment |
| Driving Type | Electric |
| Material | Aluminum Alloy |
| Display Type | LED Screen |
| Features | Portable, Foldable, Multi-function, Eco-Friendly |
| Motor | 2.5HP |
| Incline | Manual incline |
9. User Tips
- For optimal results, integrate short walking sessions throughout your workday to maintain activity levels.
- Ensure the remote control battery is fresh for uninterrupted use and responsive control.
- When using the vibration modes, start with the lowest setting and gradually increase intensity as your body adapts.
- Take advantage of the compact design by storing the walking pad under a bed or upright in a closet when not in use.
10. Warranty and Support
The SPERAX P1 Walking Vibration Pad comes with a two-year warranty for frames from the date of sale. If any quality problems occur, please contact customer service immediately.
For technical support, warranty claims, or any other inquiries, please contact your seller or reach out to SPERAX customer service:
- WhatsApp: +86 15216425580
- Email: congandy02@163.com
