1. Introduction
The GODOX K-180A Mini Master Studio Strobe is a compact and versatile flash unit designed for various photography scenes, including daily shooting, professional creation, and live streaming lighting. It aims to improve shooting quality and operational convenience. This series of studio flashes features modeling lights that can be set to full brightness or proportionally adjusted to the appropriate power, mimicking the effect of larger studio lights. It also includes an anti-pre-flash function for synchronization with cameras that use pre-flash.

2. Safety Operation Warnings
- Before use, please carefully read the complete instruction manual attached to the physical object, strictly follow the operating procedures, and avoid any violations that may cause damage to the product or personal safety risks.
- The product should not be placed near high temperature, humidity, open flames, or strong magnetic fields to avoid water ingress, collision, falling, or squeezing, and to prevent damage to internal components.
- Do not disassemble or modify the product without authorization. If there is a malfunction, do not repair it yourself. Contact customer service for handling. Unauthorized disassembly will affect after-sales support.
- For charging photography products (such as photography lights), please use the original charger to charge, avoid overcharging and overdischarging, keep away from flammable materials during charging, and dispose of waste batteries properly according to environmental standards.
3. What's in the Box
Upon opening the package, please ensure all components are present and in good condition. The standard package contents include:
- 1 x GODOX K-180A Studio Strobe
- 1 x Modeling Lamp
- 1 x Power Cord (US/EU, depending on region)

4. Parts Identification
Familiarize yourself with the different parts of your GODOX K-180A studio strobe:

- Charging LED Indicator: Shows the charging status.
- Flash Output Controller: Adjusts the flash power.
- Light Sensor: For slave triggering.
- Test Button: Manually fires the flash.
- Power Switch: Turns the unit on/off.
- Fuse: Overcurrent protection.
- Power Socket: For connecting the power cord.
- Modeling Light Switch: Controls the modeling lamp.
- Sync Cord Jack: For wired synchronization.
- Umbrella Input: For mounting a studio umbrella.
- Mounting Bracket: For attaching to a light stand and adjusting angle.
5. Setup
5.1 Flash Preparation
- Mount the flash unit on an appropriate light stand.
- Adjust the mounting bracket (labeled in the parts diagram) to the desired angle.
- Ensure the bracket is tightened and fixed securely.
- The umbrella input is applicable for any standard studio umbrella.

6. Operating Instructions
6.1 Initial Inspection
After receiving the goods, first check the appearance of the goods and whether the accessories are complete. If there is any damage or missing accessories, immediately contact customer service for verification and handling.
6.2 Assembly and Debugging
According to the physical instructions, correctly assemble the various components of the product, ensure that the connections are firm and not loose, and perform simple debugging after assembly to confirm that the product can be used normally.
6.3 Flash Output Control
The flash output controller controls the power ratio, offering adjustable stepless power from 1/8 to full. This allows you to satisfy various lighting requirements in different environments. When adjusting the power from full to a lower setting, press the test button to release the power in the capacitor. Once recharged, the flash output will be in the corresponding setting.

6.4 Test Button
To fire the flash without taking a picture, push the red TEST button. It can also be used to adjust the brightness when combined with the flash output controller.

6.5 Modeling Lamp
The modeling lamp switch decides whether the modeling lamp is on or off. Moving the switch downwards (O position) turns it off; moving it upwards (I position) turns it on. Note: Do not keep the modeling lamp on for a long time. It is recommended to cool it down for 1 minute after 5 minutes of continuous use.
6.6 Slave Trigger Model
In slave trigger mode, the flash will be fired synchronously with one external flash. This mode acts as an auxiliary lamp, offering various effects of light and shadow.

7. Maintenance
7.1 Storage and Cleaning
After use, clean any surface stains on the product. If applicable, disassemble detachable parts and store them in the original packaging or a special storage bag. Store the unit in a dry, ventilated, and cool place. Regularly check the condition of the product and avoid long-term idle periods that could lead to component aging.
8. Troubleshooting
If the product encounters problems such as inability to start or abnormal functions, first refer to the troubleshooting section of the physical manual for self-inspection. If self-inspection is unsuccessful, contact customer service, provide order information and fault details, and obtain professional after-sales support.
9. Specifications
| Feature | Specification |
|---|---|
| Model | K-180A |
| Flash Output | 180WS |
| Guide Number (m ISO 100) | 45 |
| Color Temperature | 5600±200K |
| Power Voltage | AC200-240V 50-60Hz or AC100-120V 60Hz |
| Flash Power Control | 1/8-full stepless |
| Modeling Lamp | 75WS (adjustable) |
| Recharging Time | 0.5-3 sec |
| Flash Triggering Method | Sync cord, Test button, Slave, Flash Trigger |
| Flash Duration | 1/2000-1/800s |
| Fuse | 5A |
| Dimension | 17*10*17.5cm (approx.) |
| Weight | Approx 0.59KG |
| High-speed synchronous (HSS) | No |
| TTL | No |
| Display | No |
| Compatible Brand | Nikon, Canon, Olympus, Sony, Pentax, FUJIFILM, Leica, Lumix |
| Certification | CE |


10. User Tips
- Experiment with Power Settings: The stepless power control allows for fine-tuning. Practice with different settings to achieve desired lighting effects for various subjects and environments.
- Utilize the Modeling Lamp: The adjustable modeling lamp helps visualize the lighting before the flash fires, aiding in precise light placement and shadow control. Remember to give it breaks to prevent overheating.
- Explore Accessories: The K-180A is compatible with various studio accessories like softboxes, umbrellas, and barn doors. Experimenting with these can significantly expand your creative lighting options.


11. Warranty and Support
For detailed operating procedures, parameter settings, and troubleshooting beyond this manual, please refer to the physical manual included in the product packaging for accuracy.
If you encounter any questions during use, or require after-sales support, please contact the store customer service with your order information and fault details. Unauthorized disassembly or modification of the product will affect after-sales support.
A digital version of the user manual is available for reference: User Manual (PDF)