1. Introduction
Thank you for choosing the WELLMEET SP656E SPI Single Color LED Controller. This device is designed to provide versatile control over your monochrome LED lighting, featuring built-in dynamic effects and music reactive capabilities. It supports control via both the Mi Home and BanlanX mobile applications, as well as 2.4G RF remote controls (RB1/RC1 models, sold separately).

Key Features:
- Supports control by the "BanlanX" and "Mi Home" Apps.
- Supports voice control with "Xiao Ai".
- Supports 2.4G touch remote control (RB1) and 2.4G touch 86-type control panel (RC1).
- Supports single-wire RZ LED driver ICs.
- Built-in a variety of pure white light dynamic effects and music effects, with multiple adjustable parameters.
- Supports various ON/OFF animation effects.
- Includes an ON/OFF timer function.
- Supports OTA firmware upgrade.
Note: Please connect to the "BanlanX" App to access more features.

2. Specifications
| Attribute | Value |
|---|---|
| Model Number | WM-SP656E |
| Brand Name | WELLMEET |
| Item Type | Dimmers |
| Material | PLASTIC |
| Input Voltage | DC 5V~24V |
| Output Signal | SPI |
| Max. Load Power (IC Count) | 600 PIXEL |
| Working Current | 5mA~18mA |
| Working Temperature | -20°C~60°C |
| Dimensions | 78mm x 56mm x 20mm |
| Certification | CE, ROHS |
| Origin | Mainland China |
3. Package Contents
- 1 x SP656E SPI Single Color LED Controller
- (Remote controls RB1 and RC1 are sold separately and are not included in the standard package.)

4. Safety Precautions
Please read and adhere to the following safety guidelines before installation and operation:
- This product should be debugged and installed by personnel with professional qualifications.
- This product is not waterproof. It needs to be protected from direct sunlight and rain. If installed outdoors, please ensure it is housed in a waterproof enclosure.
- Good heat dissipation conditions are crucial for extending the service life of LED controllers. Install the product in a well-ventilated environment.
- Do not install or use this product in areas prone to lightning, strong magnetic fields, or high voltage.
- Always check that the output voltage of the LED power supply used meets the requirements of the product's voltage range (DC 5V-24V).
- The diameter and size of the wires used must be sufficient to handle the load of the connected LED lighting fixtures. Ensure all wiring is secure to prevent accidents caused by heat or poor contact.
- Before powering on and debugging, it is essential to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

5. Setup and Wiring
5.1. Wiring Diagram
Connect the SP656E controller to your power supply and LED light strip as shown in the diagram below. Ensure correct polarity for VCC, DAT, and GND connections.

5.2. App Installation and Device Pairing
The SP656E controller supports both Mi Home and BanlanX applications for smart control.
Mi Home App:
To add the device to the Mi Home app:
- Open the Mi Home app and log in to your account.
- Click on the upper right corner of the app homepage "+" icon, then enter the add device page.
- Alternatively, click on the upper right corner of the app homepage "+", then click on scan, scan the product QR code, and then follow the page prompts to complete the device add and use.
Tip 1: If the product QR code cannot be scanned, you can add the device by searching for the product name. Due to continuous app updates, please refer to the current Mi Home app guidance for the most accurate steps.
Tip 2: If the device is not found, you can reset the device. To reset, power on the device, press and hold the switch key on the device for about 3 seconds. Wait for the indicator light to flash, and then add the device again.

BanlanX App:
To add the device to the BanlanX app:
- Scan the product QR code or search for "BanlanX" in the App Store or Google Play. Download and install the BanlanX app.
- Open the app, click the "+" icon in the top right corner of the home page to add the device.
- Click the settings icon in the upper right corner of the App to enter the settings page, where you can modify the device name, set timings, set the on/off effect, perform OTA firmware upgrades, etc.

6. Operation
6.1. Indicator Light and Button

- Button Description:
- Short press: Turn on/off the light.
- Long press: Enter network configuration mode.
- Indicator Light Status Description:
- Working status indication: Green light on.
- Network configuration status indication: Green light flashing.
- Receiving remote control data indication: Green light flashing once per data reception.
6.2. 2.4G Touch Remote Control (RB1/RC1)
The SP656E controller is compatible with RB1 and RC1 2.4G touch remote controls (purchased separately). These remotes offer enhanced control capabilities:
- Support one-to-many control: One remote can control multiple controllers.
- Support multi-to-one control: Each controller can bind up to 5 remote controls.
- Support unified control and 4 zone control.


Note: For detailed instructions on using the remote controls, please refer to their specific user manuals.
7. User Tips
- Always double-check your power supply voltage (DC 5V-24V) to ensure it matches the controller's requirements and the LED strip's specifications.
- For optimal performance and longevity, ensure the controller is installed in a location with adequate ventilation to prevent overheating.
- Utilize the timer functions available in the BanlanX or Mi Home apps to automate your lighting schedules, enhancing convenience and energy efficiency.
- If experiencing connectivity issues, try resetting the controller by holding the power button for 3 seconds until the indicator light flashes, then re-pair with the app.
8. Maintenance
- Keep the controller clean and dry. Avoid exposure to moisture or dust.
- Do not use harsh chemicals or abrasive cleaners on the device.
- Periodically inspect all wiring connections to ensure they remain secure and free from corrosion.
- Avoid placing the controller in direct sunlight or near heat sources to prevent damage.
9. Troubleshooting
- LED strip not lighting up:
- Check if the power supply is connected correctly and providing the correct voltage (DC 5V-24V).
- Verify all wiring connections (VCC, DAT, GND) between the power supply, controller, and LED strip are secure and have correct polarity.
- Ensure the LED strip itself is functional.
- Remote control or App not working:
- For remote controls, check battery levels.
- For app control, ensure your smartphone's Bluetooth is enabled and the controller is within range.
- Try resetting the controller (long press button for 3 seconds) and re-pairing it with the app.
- Ensure the app is updated to the latest version.
- Unexpected lighting effects or behavior:
- Check the settings within the BanlanX or Mi Home app for the selected effects and parameters.
- Perform an OTA firmware upgrade via the BanlanX app if available, as this may resolve software-related issues.
10. Warranty and Support
WELLMEET provides lifelong technical support for its LED controller products.
Warranty Policy:
- Free Warranty: If any quality issues arise within two years from the date of purchase, WELLMEET will provide free repair or service replacement.
- Paid Warranty: Products that exceed the free warranty period will be subject to a charge for repair materials and services.
Warranty Exclusions:
The following situations are not covered under free warranty or replacement services:
- Damage caused by excessive voltage, overload, or improper operation.
- Any wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
- Serious damage or deformation to the product's appearance caused by transportation or physical impact.
- Product appearance is severely damaged or deformed.
- Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.
The company's maximum responsibility for factory products is to replace them with products of the same model and quantity.
To expedite the repair or replacement process, please provide a detailed description of the fault phenomenon, operating environment, and actions taken when the fault occurred.
If a returned product and its initial accessories are received, the logistics cost of the return will be borne by the customer.

11. Certifications
The WELLMEET SP656E controller complies with national and international certification standards, ensuring safe and worry-free use.
- CE Certified
- RoHS Compliant
- FC Certified
