Prozor AK-45

Contents

PROZOR AK-45 HiFi Digital Amplifier User Manual

Model: AK-45

1. Introduction

Thank you for choosing the PROZOR AK-45 HiFi Digital Amplifier. This compact and versatile stereo amplifier is designed to enhance your audio experience, offering multiple input options including Bluetooth 5.0, USB, SD card, FM radio, and RCA. With adjustable bass and treble controls, microphone inputs for karaoke, and a convenient remote control, the AK-45 is perfect for home theater systems, karaoke setups, and general audio playback.

This manual provides detailed instructions for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity.

2. Product Overview

2.1 Front Panel Controls

PROZOR AK-45 Front Panel Diagram

Diagram of the PROZOR AK-45 amplifier's front panel, showing all controls and their functions.

  1. Power Switch: Turns the amplifier ON/OFF.
  2. Treble Control: Adjusts the high-frequency audio output.
  3. Bass Control: Adjusts the low-frequency audio output.
  4. Microphone Volume Control: Adjusts the volume of the connected microphones.
  5. Microphone Jack (MIC1, MIC2): Connects microphones for karaoke or voice input.
  6. Master Volume Control: Adjusts the overall output volume.
  7. SD Card Slot: Insert an SD/MMC card for audio playback.
  8. USB Port: Insert a USB flash drive for audio playback.
  9. Digital Display: Shows current mode, track information, and other status indicators.
  10. Mode Switch: Cycles through input modes (FM, USB, SD, Bluetooth, RCA).
  11. Previous Track: Skips to the previous audio track.
  12. Play/Pause: Plays or pauses the current audio track.
  13. Next Track: Skips to the next audio track.
  14. Repeat/Loop: Toggles repeat playback modes.

2.2 Rear Panel Connections

PROZOR AK-45 Rear Panel Diagram

Diagram of the PROZOR AK-45 amplifier's rear panel, illustrating audio input, speaker output, and power connections.

  • FM ANT: Connect an FM antenna for radio reception.
  • AUDIO INPUT (RCA L/R): Connect external audio sources such as laptops, tablets, CD/DVD players using RCA cables.
  • SPEAKERS OUTPUT (L/R): Connect passive speakers with an impedance of 4-16Ω. Ensure correct polarity (+ to + and - to -).
  • DC INPUT DC12V/5A: Connect the DC 12V/5A power adapter.
  • AC POWER INPUT AC90-240V 50-60HZ: Connect the AC power cord to a wall outlet.

2.3 Remote Control Functions

PROZOR AK-45 Remote Control Diagram

Diagram of the remote control for the PROZOR AK-45 amplifier, detailing button functions.

  1. Power On/Off: Toggles amplifier power.
  2. FM Channel Switch: Changes FM radio channels.
  3. Next Track: Skips to the next audio track.
  4. Previous Track: Skips to the previous audio track.
  5. Volume +/-: Increases or decreases the volume.
  6. Single Loop/Repeat: Toggles single track repeat or all track repeat.
  7. Mode Switch: Cycles through input modes.
  8. EQ Switch: Cycles through equalizer presets.
  9. Play/Pause: Plays or pauses the current audio track.

3. Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging. Ensure all items listed in the package contents are present.
  2. Speaker Connection: Connect your passive speakers to the SPEAKERS OUTPUT terminals on the rear panel. Ensure that the positive (+) terminal of the amplifier connects to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier connects to the negative (-) terminal of the speaker. The amplifier supports speakers with an impedance of 4-16Ω.
  3. Audio Source Connection:
    • RCA Input: For devices like CD/DVD players, laptops, or tablets, connect an RCA audio cable from your source device's audio output to the AUDIO INPUT (L/R) jacks on the amplifier's rear panel.
    • USB/SD Card: Insert a USB flash drive into the USB port or an SD/MMC card into the SD card slot on the front panel.
    • FM Antenna: Connect an FM antenna to the FM ANT port for radio reception.
  4. Power Connection: Connect the provided power adapter to the DC INPUT (DC12V/5A) or the AC power cord to the AC POWER INPUT (AC90-240V 50-60HZ) on the rear panel, then plug it into a suitable wall outlet.
  5. Remote Control Preparation: Before first use, remove the transparent insulation film from the remote control's battery compartment to activate the battery.

4. Operating Instructions

  1. Power On: Flip the Power Switch on the front panel to the 'ON' position. The digital display will light up.
  2. Select Input Mode: Press the 'Mode' button on the front panel or remote control to cycle through available input sources: FM, USB, SD, Bluetooth, and RCA (Line In). The selected mode will be shown on the digital display.
  3. Bluetooth Pairing:
    • Switch the amplifier to 'Bluetooth' mode. The display will show 'BLUE'.
    • On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
    • Select 'AK-45' from the list to pair. Once connected, you can stream audio wirelessly from your device up to 10 meters away.
  4. USB/SD Playback: When a USB drive or SD card with audio files is inserted, the amplifier will automatically switch to USB/SD mode and begin playback. Use the 'Previous Track', 'Play/Pause', and 'Next Track' buttons on the front panel or remote to control playback.
  5. FM Radio: In 'FM' mode, use the 'Previous Track' and 'Next Track' buttons to scan for stations. The remote control may offer additional FM channel switching functions.
  6. Adjusting Audio:
    • Use the 'Master Volume Control' knob on the front panel or the 'Volume +/-' buttons on the remote to adjust the overall sound level.
    • Turn the 'Bass Control' and 'Treble Control' knobs to fine-tune the low and high frequencies to your preference.
  7. Microphone Usage: Plug microphones into the 'MIC1' or 'MIC2' jacks. Use the 'Microphone Volume Control' knob to adjust the microphone's volume independently.
  8. Power Off: When finished, flip the Power Switch to the 'OFF' position.

5. User Tips

  • Addressing Background Noise: If you experience noticeable background noise or a constant hum from connected speakers, especially at high volumes, try replacing the audio cables connecting the speakers. Experimenting with different speakers might also help identify if the issue lies with the speakers or the cabling.
  • Remote Control Battery: If the remote control stops responding, check if the CR2025 battery needs replacement. Ensure the insulation film is removed before first use.
  • Optimal Speaker Matching: For the best sound quality, ensure your passive speakers have an impedance within the recommended 4-16Ω range.

6. Troubleshooting

ProblemPossible CauseSolution
No sound outputAmplifier not powered on; incorrect input mode selected; speakers not connected or faulty; volume too low; audio source issue.Ensure power switch is ON; select correct input mode; check speaker connections and polarity; increase master volume; verify audio source is playing.
Humming or static noisePoor cable connections; ground loop issue; interference; faulty cables or speakers.Check all cable connections; try different audio cables; ensure proper grounding; move amplifier away from other electronic devices; try different speakers.
Remote control not workingBattery insulation film not removed; dead battery; remote not pointed at IR receiver; obstruction.Remove insulation film; replace battery with a new CR2025; ensure clear line of sight to the amplifier's IR receiver; reduce distance to amplifier.
Bluetooth pairing failureAmplifier not in Bluetooth mode; device too far; device already paired to another unit; Bluetooth on device is off.Switch amplifier to 'Bluetooth' mode; ensure device is within 10m range; disconnect from other Bluetooth devices; enable Bluetooth on your device.
USB/SD card not playingIncorrect file format; card/drive not inserted correctly; corrupted files; unsupported capacity.Ensure audio files are in a supported format (e.g., MP3); reinsert USB/SD card; try a different USB/SD card; check for file corruption.

7. Specifications

FeatureSpecification
BrandProzor
Model NumberAK-45
TypeDigital Audio Amplifier
Power Output40W + 40W
Speaker Impedance4-16Ω
Bluetooth Version5.0
InputsUSB, SD/MMC, FM, Bluetooth, RCA (Line In)
ControlsTreble, Bass, Microphone Volume, Master Volume
Signal-to-Noise Ratio (SNR)> 92dB
Power InputDC 12V/5A, AC 90-240V 50-60Hz
Dimensions (L*W*H)21.50 x 20.00 x 9.50 cm
Weight0.925 kg
CertificationCE

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
  • Ventilation: Ensure the amplifier has adequate ventilation. Do not block the ventilation openings on the unit. Overheating can lead to performance issues or damage.
  • Storage: When not in use for extended periods, store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Management: Keep cables organized and free from kinks or excessive bending to prevent damage and ensure optimal signal transmission.

9. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.