jikong JK BMS B2A8S20P

Contents

JIKONG V19 JK BMS B2A8S20P Smart BMS User Manual

Model: JK BMS B2A8S20P | Brand: JIKONG

1. Product Overview

The JIKONG V19 JK BMS B2A8S20P is an intelligent Battery Management System designed for large-capacity series lithium battery packs. It features voltage acquisition, high-current active balancing, and comprehensive protection functions including overcharge, over-discharge, overcurrent, and over-temperature protection. The system also includes a coulomb meter, Bluetooth communication, and optional GPS remote functionality.

This BMS is suitable for various battery types, including Lithium Iron Phosphate (Lifepo4), Ternary Lithium (Li-ion), and Lithium Titanate (LTO) batteries. Its compact size, ease of operation, and full functionality make it ideal for applications in small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG V19 Version BMS with key features
Figure 1.1: JIKONG V19 Version BMS highlighting key features like balance current, battery strings, charge/discharge current, and functions.
JIKONG Smart BMS V19 Version JK-B2A8S20P-HC with detailed specifications
Figure 1.2: Detailed specifications for the JIKONG Smart BMS V19 Version JK-B2A8S20P-HC, including BMS type, balance current, battery strings, charge/discharge current, size, and battery type.
JK-B2A8S20P-H-C features
Figure 1.3: Key features of the JK-B2A8S20P-H-C model, including active balance, current, battery string adaptability, continuous current, heating function, RS485, and CANBUS chip.

2. Safety Information

Always handle battery systems with care. Incorrect wiring or operation can lead to serious damage to the BMS, battery pack, or personal injury. Ensure all connections are secure and correct before powering on the system. Refer to the wiring diagram and interface definitions carefully.

3. Package Contents

Upon opening the package, please verify that all the following items are included:

  • JIKONG Smart BMS (with Bluetooth built-in)
  • Temperature sensor (40cm)
  • Balance Wires (75cm)
  • Active Switch (15cm)
  • Heating cable (included only for BMS models with Heat Function)
  • Screws (x6)
  • NTC (40cm)
  • Switch (50cm)
  • Wires (70cm)
  • Pack box
  • Operate manual (PDF)
Packing List of JIKONG Smart BMS
Figure 3.1: Visual representation of the items included in the JIKONG Smart BMS package.

4. Specifications

4.1. General Specifications

ParameterValueUnit
Supply Voltage7.5-36V
Operating Power Consumption<900mW
Operating Temperature-30-70°C
Max. Number of Collection Strings8Strings
Max. Balancing Current1A / 2AA
Max. Charging Current200A
Max. Discharge Current200A
Max. Instantaneous Current400A
Max. Internal Loop Resistance0.35mΩ
Protective Plate Size152.25×127.26×15.6mm
Finished Weight424g

4.2. Default Parameters (Example for LiFePO4)

ParameterLiFePO4 DefaultUnit
Balancing Initial Voltage3V
Max. Balancing Current2A
Unit Overcharge Voltage3.6V
Single Overcharge Protection Recovery3.55V
Monomer Undervoltage Protection2.6V
Single Undervoltage Protection Recovery2.65V
Automatic Shutdown Voltage2.5V
Trigger Balancing Differential Pressure0.01V
Charging Overtemperature Protection70°C
Discharge Overtemperature Protection70°C
Charging Low Temperature Protection-20°C
MOS Overtemperature Protection100°C

5. Setup and Installation

5.1. Wiring Diagram

The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack. Always ensure correct connections to prevent damage.

Wiring Diagram for JIKONG Smart BMS
Figure 5.1: General wiring diagram for the JIKONG Smart BMS, showing connections for battery pack, load, and charger.
Detailed view of JK-B2A8S20P-HC ports
Figure 5.2: Detailed view of the JK-B2A8S20P-HC ports, including NTC, UART/GPS, RS485/CAN, ACC, Display/Switch, Sampling Port, and Heating Cable connection.

5.2. Interface Definitions

The BMS features various interfaces for communication and control:

  • Balance and Acquisition Interface (P1 XH-10AW-2.54): Connects to the battery cells for voltage monitoring and balancing. Includes B- (Total negative battery), B1-B8 (Positive terminals for cells 1-8), and B+ (Protection board power supply, connected to the battery).
  • Buzzer Interface (P2 A1254WF-2A, Optional): For alarm indications.
  • Communication Interface (P3 A1254WF-4A, Optional): Supports RS485 and CAN communication.
  • GPS Interface (P4 1.25T-4PWT): For connecting an optional GPS module.
  • Temperature Sensor Interface (P5 HY2.0-4P): For connecting up to 4 external temperature sensors.
  • Temperature Sensor Interface (P6 HY2.0-4P): For connecting additional temperature sensors.
  • Display Interface (P7 A1254WF-6A): For connecting an optional display screen.
  • Parallel Interface (P8 A1254WF-3A, Optional): For parallel module status signal.
  • ACC Interface (P9 A1254WF-5A, Optional): For ACC detection and charger output detection.
  • Heating Wire: 16AWG-Orange-Yellow-15CM, connects to the heater element negative electrode.
  • P- Terminal: Connects to external load or negative terminal of charger (M6 screws).
  • B- Terminal: Connects to the negative battery terminal (M6 screws).

5.3. Heating Function Wiring

For models with the heating function, the green 5PIN cable of the heating cable must be linked to the heating pad. The red and black cables are connected to a smart charger. The smart charger, linked to the BMS, detects battery temperature and automatically controls the heating function based on the low-temperature charge protection settings. The maximum heating power is 200W (100W for B2A8S20P), with a maximum current of 3A.

6. Operation

6.1. APP Installation

The JIKONG BMS can be monitored and controlled via a mobile application. The APP supports both Android (minimum version 7) and iOS operating systems.

  • For iOS: Search for "JIKONG BMS" in the APP STORE.
  • For Android: Search for "JK BMS" in the Google STORE.
Smart BT APP interface showing real-time battery data
Figure 6.1: Screenshot of the Smart BT APP interface displaying real-time battery data and control options.

6.2. Device Activation

Before powering on the protection board, ensure the balance cable is properly connected, and the P- and B- terminals are correctly wired. Confirm that the protection board is securely fixed to the battery pack. Incorrect connections can lead to malfunction or damage.

The BMS does not have a power-on control switch. It is designed for charging activation. After the battery assembly is complete, connect the charger (charger voltage must be 2V higher than battery pack voltage) to activate the BMS. Alternatively, if an optional display screen and button are connected, the device can be activated by inserting the cable into the display interface and pressing the button.

6.3. Parameter Setting

After activation, parameters need to be set for the first start-up. The default password for parameter settings is 123456. You will need to set the number of units (battery strings) and the battery type (Lifepo4, Li-ion, or LTO).

6.4. Active Balancing

The BMS utilizes active equalization technology to transfer energy from high-voltage cells to low-voltage cells, improving battery consistency and extending battery life. Users can set the balance trigger pressure difference (mV) in the APP. Balancing automatically activates when the voltage difference between any two battery strings exceeds the set value and turns off when it falls below the set value. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C of battery capacity).

6.5. Protection Functions

The JIKONG BMS offers comprehensive protection features:

  • Overcharge Protection: Prevents battery cells from being overcharged by shutting off charging when a cell's voltage exceeds the set overcharge protection voltage.
  • Discharge Undervoltage Protection: Prevents over-discharge by cutting off discharge when a cell's voltage drops below the set undervoltage protection voltage.
  • Charge Overcurrent Protection: Triggers if the charging current exceeds the set continuous charging current for a specified delay.
  • Discharge Overcurrent Protection: Activates if the discharge current exceeds the set continuous discharge current for a specified delay.
  • Overtemperature Protection: Shuts off charging/discharging if battery temperature exceeds safe limits.
  • Low Temperature Protection: Prevents charging at dangerously low temperatures to protect cell integrity.
  • Short Circuit Protection: Automatically protects against short circuits. Users can adjust the delay and recovery time.
  • Emergency Switch: Provides 30 minutes of charge/discharge operation in case of critical issues like over-temperature, over-discharge, or cell drop, allowing for emergency use.
  • Intelligent Sleep: Reduces BMS power consumption by entering a sleep state when the charging/discharging current is low for an extended period.

7. Troubleshooting

7.1. Common Issues and Solutions

  • BMS Does Not Turn On:
    1. Ensure the last 'B+' line of the cable is connected to the battery's positive pole.
    2. Activate by charging; ensure charger voltage is at least 4V higher than the battery pack voltage.
    3. Verify the charger has voltage output.
  • Inaccurate Voltage Readings:
    1. Measure the actual total battery pack voltage with a multimeter.
    2. Enter this actual voltage into the 'voltage calibration' setting in the APP.
  • Inaccurate Current Readings:
    1. Ensure both B- and P- terminals are connected with two 7AWG wires in parallel to avoid current errors.
    2. Measure the actual current with a clamp meter.
    3. Enter this actual current into the 'current calibration' setting in the APP. Higher actual current during calibration leads to better accuracy.
  • Inaccurate Capacity Readings:
    1. Initial capacity estimation based on monomer voltage at first power-on may be inaccurate.
    2. Calibrate capacity by fully discharging the battery to its cut-off voltage, then fully charging it without interruption.
  • Inconsistent String Number:
    1. Check if the 'unit quantity' in the parameter settings is correctly configured.
    2. If there is no voltage in two or more middle strings, check for loose acquisition cable connections.

8. User Tips

  • For optimal balancing, ensure the battery type and cell count are accurately set in the APP.
  • When using the heating function, consider the ambient temperature and battery type. In extremely cold environments, the heating function is crucial for battery longevity and performance.
  • Regularly check the APP for real-time battery status and any error messages to ensure safe operation.
  • For initial setup and calibration, it is recommended to perform a full charge and discharge cycle to ensure accurate capacity readings.

9. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or refer to the official JIKONG website. Keep your purchase records for any warranty-related inquiries.

A detailed PDF version of this manual is available for download: JIKONG Lithium Battery Active Balance Protection Board Maintenance Manual (PDF)

Video 9.1: JIKONG Active Balance BMS overview, demonstrating balancing, smart management, compatibility with various string numbers, and protection features.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.