JIKONG B1A8S10P

Contents

JIKONG JK BMS B1A8S10P User Manual

Model: B1A8S10P | Brand: JIKONG

1. Product Overview

The JIKONG Lithium battery intelligent protection board (BMS) is a management system designed for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge, over-temperature protection, coulomb meter, Bluetooth communication, and optional GPS remote functions. It is suitable for lithium iron phosphate, ternary lithium, and lithium titanate battery types.

This protection board utilizes energy transfer active balancing technology, capable of achieving a maximum continuous 1A balance current. This high current active equalization technology ensures battery consistency, improves battery range, and extends battery life.

The BMS includes a mobile APP for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. Its compact size, ease of operation, and comprehensive functions make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.

Video: JIKONG Active Balance BMS in action, demonstrating 24-hour detection, real-time automatic balancing, and smart management via app.

2. Key Features

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485
  • Support CAN
  • Support heating function
  • Support parallel function
  • Support alarm function
  • Support GPS communication
  • Discharge precharge function
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Six Security Protection features of the JIKONG Smart BMS

Image: Six Security Protection features of the JIKONG Smart BMS.

Smart BT APP interface for real-time battery data monitoring and parameter control

Image: Smart BT APP interface for real-time battery data monitoring and parameter control.

3. Specifications

3.1. Basic Parameters

ParameterValueUnit
Supply voltage10-36V
Operating power consumption<900mW
Operating temperature-30-70°C
Maximum number of collection strings8String
Maximum balancing current1A
Maximum charging current100A
Maximum discharge current100A
Maximum instantaneous current200A
Maximum internal loop resistance0.8mΩ
Protective plate size153.9*107*17.6mm
Finished weight411g

3.2. Default Parameters

ParameterLi-ion (Default)LiFePO4 (Default)LTO (Default)Unit
Balancing initial voltage332V
Maximum balancing current111A
Unit overcharge voltage4.23.62.7V
Single overcharge protection recovery4.183.552.65V
Monomer undervoltage protection2.822.61.8V
Single undervoltage protection recovery2.852.651.85V
Automatic shutdown voltage2.82.51.7V
SOC-0% voltage2.92.61.85V
SOC-100% voltage4.183.52.65V
Trigger balancing differential pressure0.010.010.01V
Charging overcurrent protection delay303030S
Charge overcurrent protection release time606060S
Discharge overcurrent protection delay300300300S
Discharge overcurrent protection release time606060S
Short-circuit protection delay150015001500uS
Short circuit protection release time606060S
Charging overtemperature protection temperature707070°C
Charge overtemperature restore temperature606060°C
Discharge overtemperature protection temperature707070°C
Discharge overtemperature recovery temperature606060°C
Charging low temperature protection temperature-20-20-20°C
Charge low temperature to restore temperature-10-10-10°C
MOS Overtemperature protection temperature100100100°C
MOS Overtemperature protection recovery temperature808080°C
Device address000/
Discharge precharge time000S
Product specifications for JK-B1A8S10P and JK-B1A8S10P-HC models

Image: Product specifications for JK-B1A8S10P and JK-B1A8S10P-HC models, including dimensions and functions.

4. Product Variants and Compatibility

4.1. Product Adaptation Guide

Product SpecificationBattery TypeNumber of Adaptive Battery Strings
JK-B1A8S-10PTernary lithium battery3~8
JK-B1A8S-10PLithium iron battery4~8
JK-B1A8S-10PLithium titanate battery7~8

4.2. Function Selection Guide

Battery String CountOptional FunctionProduct Model
3~8Standard optionJK-B1A8S-10P
3~8Standard + CAN communicationJK-B1A8S-10PC
3~8Standard + RS485 communicationJK-B1A8S-10PR
3~8Standard + heatingJK-B1A8S-10PH
3~8Standard + heating + CAN communicationJK-B1A8S-10PHC
3~8Standard + heating + RS485 communicationJK-B1A8S-10PHR
3~8Standard + heating + CAN communication + RS485 communicationJK-B1A8S-10PHCR
Overview of JIKONG Smart BMS models and their features

Image: Overview of JIKONG Smart BMS models and their features, including balance current, battery strings, charge/discharge current, and functions.

5. Installation and Wiring

5.1. Package Contents

Components included in the package

Image: Components included in the package: BMS, manual, screws, NTC, switch, and wires.

5.2. Wiring Diagram and Method

The JK-B1A8S-10P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack, as shown in the diagram below.

Wiring Diagram for JK-B1A8S-10P

Image: Wiring Diagram for JK-B1A8S-10P, showing connections to battery pack, load, and charger.

5.3. Interface Definition

The BMS features various interfaces for connectivity and functionality:

  • Temperature Sensor Interface: All JKBMS models are equipped with this.
  • RS485 Interface: All JKBMS models are configured with this.
  • LCD Interface: All JKBMS models are equipped with this.
  • CAN Interface: Only configurations with "CAN" in the model name support this.
  • Heating Interface: Only configurations with "Heat" in the model name support this.

For detailed pin definitions of product connectors, please refer to the original user manual PDF.

5.4. Product Dimensions

The dimensions of the JK-B1A8S-10P series protection board are 153.9mm × 107mm × 17.6mm.

JIKONG BMS B1A8S10P model with specifications

Image: JIKONG BMS B1A8S10P model with specifications and dimensions.

6. Operation Instructions

6.1. APP Installation

The mobile APP for the product can be obtained by scanning the QR code below. An Android Version 7 minimum is required for the Android APP.

QR code for JIKONG BMS APP download

Image: QR code for JIKONG BMS APP download.

Alternatively, search for "JIKONG BMS" in the APP STORE for iOS or "JK BMS" in the Google STORE for Android.

6.2. Device Activation and Initial Setup

  1. Before starting the protection board, ensure the balance cable is properly connected and that P- and B- are correctly connected. Verify the protection board is securely fixed to the battery core. Incorrect connections can lead to malfunction or damage.
  2. After confirming connections, power on the protection board. The BMS does not have a power-on switch; it is designed for charging activation mode. The charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.
  3. The protection board also supports key activation (via an additional switch) and display activation (if a display screen and button are installed, simply plug the cable into the display interface and press the button).
  4. Turn on GPS and Bluetooth on your mobile phone.
  5. Ensure your mobile Bluetooth is on, then open the APP. Click the top left corner of the APP to search for devices. Click on the device name to connect (default password: 1234).
  6. For the first startup, parameters need to be set. Setting requires a password (default: 123456). Simply set the number of units (cells) and battery type.
  7. Once parameters are set, return to the real-time status page to check battery status. Ensure no error messages are prompted and operation is normal. Blue indicates the highest voltage, red indicates the lowest voltage.

6.3. Parameter Setting

Users can set the balance trigger pressure difference (mV) in the APP's parameter settings. When balancing is enabled, it automatically activates if the pressure difference between any two battery strings exceeds the set value, and deactivates when it falls below the set value. The default balance current is 1A. Users can adjust the balance current based on battery capacity, ensuring it does not exceed 0.2C of the battery capacity (C). If balancing is not needed, it can be turned off in the BMS control page of the APP.

For detailed instructions on setting protection board parameters, please refer to the original user manual PDF.

7. Protection Features

The JIKONG BMS offers comprehensive protection for your battery system:

  • Charge Overvoltage Protection: Prevents overcharging by shutting off charging when any cell exceeds the set voltage. Resumes when all cells are below the recovery voltage.
  • Discharge Undervoltage Protection: Prevents over-discharging by shutting off discharge when any cell falls below the set voltage. Resumes when all cells are above the recovery voltage.
  • Charge Overcurrent Protection: Protects against excessive charging current. Triggers after a set delay and resumes after a release time.
  • Discharge Overcurrent Protection: Protects against excessive discharge current. Triggers after a set delay and resumes after a release time. (Note: Max continuous discharge current should not exceed 100A).
  • Overtemperature Protection: Shuts off charging/discharging if battery temperature exceeds set limits. Resumes when temperature returns to safe levels.
  • Low Temperature Protection: Shuts off charging if battery temperature falls below set limits. Resumes when temperature returns to safe levels. Heating function is recommended for cold environments.
  • Short Circuit Protection: Automatically protects against short circuits. Delay and recovery times can be configured via the APP.
  • Discharge Precharge Function: Optional feature with a default precharge time of 5 seconds. Can be enabled or disabled as needed.
  • Emergency Switch: Provides 30 minutes of continued charge/discharge operation in emergency situations (e.g., over-temperature, over-discharge) to prevent immediate power loss.
  • Intelligent Sleep: Reduces self-consumption by entering sleep mode when charge/discharge current is below 1A for 26 consecutive hours. Can be reactivated via button or charger.
  • Communication Function: Supports optional CAN/RS485. Address and protocol can be configured via the APP.
Six Security Protection features of the JIKONG Smart BMS

Image: Six Security Protection features of the JIKONG Smart BMS.

8. Maintenance

The JIKONG BMS is designed for low maintenance. Regular checks include:

  • Connection Integrity: Periodically inspect all wiring, especially balance cables and main power connections (P- and B-), for secure and correct attachment.
  • Parameter Review: Occasionally review the parameters set in the APP to ensure they align with your battery configuration and usage patterns.
  • Firmware Updates: Check the JIKONG BMS APP for any available firmware updates to ensure optimal performance and access to new features.
  • Physical Inspection: Ensure the BMS is securely mounted and free from physical damage, moisture, or excessive dust accumulation.

9. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following:

  • BMS Not Activating: Ensure the charger voltage is at least 2V higher than the battery pack voltage. If using a display/button, ensure it's connected and the button is pressed.
  • Balancing Issues: Check the balance trigger pressure difference setting in the APP. Ensure the balance current is appropriate for your battery capacity.
  • Protection Triggered: If a protection (overvoltage, undervoltage, overcurrent, overtemperature, short circuit) is triggered, the BMS will shut down charging/discharging. Identify the cause (e.g., high/low voltage, excessive current, temperature) and rectify it. The APP will provide alarm notifications.
  • Short Circuit Protection on Startup: If short circuit protection triggers when connecting a charger or load, ensure external wiring is correct. For loads with large capacitance, increasing the short circuit protection delay in the APP may help.
  • Communication Problems: Ensure Bluetooth is enabled on your mobile device and the APP is correctly connected. For CAN/RS485, verify the address and communication protocol settings.
  • Heating Function Not Working: Ensure your BMS model supports heating (check for "Heat" in the model name). Verify the heating film or charger connections. Check the low-temperature protection settings in the APP.

10. User Tips

  • Always double-check all wiring connections before powering on the BMS to prevent damage.
  • Utilize the mobile APP to regularly monitor your battery's health and adjust settings as needed for optimal performance.
  • For cold environments, consider enabling the heating function to maintain battery efficiency and longevity.
  • Keep the BMS firmware updated to benefit from the latest features and improvements.

11. Warranty and Support

For detailed warranty information and technical support, please refer to the official JIKONG user manual PDF. The PDF document provides comprehensive details on product specifications, usage, and troubleshooting.

You can access the full user manual PDF here: JIKONG JK BMS User Manual (PDF)

© 2024 JIKONG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.