1. Introduction
The KF100/KF100 MAX is an advanced GPS drone designed for aerial photography, featuring an 8K HD camera, a 3-axis mechanical stabilization gimbal, and omnidirectional obstacle avoidance. It offers intelligent flight modes and a remote control with a built-in screen for an enhanced user experience. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
Figure 1: KF100 MAX Drone and Remote Control
2. Safety Guidelines
Please read and understand all safety instructions before operating the drone. Failure to follow these guidelines may result in injury, damage to the drone, or property damage.
- Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
- Always operate the drone in open areas, away from people, buildings, and obstacles.
- Maintain a safe distance from the drone during operation.
- Do not fly the drone in strong winds, rain, or other adverse weather conditions.
- Ensure the battery is fully charged before each flight.
- Perform pre-flight checks, including propeller installation and camera functionality.
- Keep hands and face away from rotating propellers.
- Do not operate the drone under the influence of alcohol or drugs.
- Children should only operate the drone under adult supervision.
3. Package Contents
Verify that all items are present in the package:
- 1 x RC Drone (KF100 or KF100 MAX)
- 1 x Remote control with screen
- 1 x USB Charging Cable
- 4 x Spare Propellers
- 1 x User Manual (this document)
- 1 x Screwdriver
- 1 x Storage Bag (may vary by package)
Figure 2: Illustrative Package Contents
4. Specifications
| Feature | Specification |
|---|---|
| Model | KF100 / KF100 MAX |
| Color | Dark Grey |
| Flight System | Dual GPS-Optical Flow-Obstacle Avoidance |
| Motor Type | Brushless Motor (2206) |
| Operating Frequency | 5G + Digital Image Transfer Bridge (2.4 GHz Aircraft Operating Frequency) |
| Drone Battery | 11.4V 9800mAh (Fast Charging) |
| Flight Time | About 50 minutes |
| Drone Charging Time | About 6 hours (USB Charging Cable) |
| Remote Control Battery | 7.4V 4600mAh (Built-in) |
| Remote Control Charging Time | About 3.5 hours |
| Remote Control Operating Time | About 3 hours |
| Control Distance | Up to 20km (Outdoor and unobstructed) |
| Image Transmission Distance (WiFi) | Up to 20km (Outdoor and unobstructed) |
| Maximum Altitude | 800m |
| Max Takeoff Weight | <1kg |
| Max Wind Speed Resistance | < 10 KM/H |
| Max Horizontal Speed | 11 M/S |
| Max Ascent Speed | 6 M/S |
| Max Descent Speed | 3.5 M/S |
| Drone Weight | 750g |
| Folded Dimensions | 23.3 x 11.8 x 12.8 cm (9.17 x 4.65 x 5.04 inches) |
| Expanded Dimensions | 42 x 42 x 12.8 cm (16.54 x 16.54 x 5.04 inches) |
| Camera | 3-Axis Electronic Stabilization Gimbal Real 8K Camera |
| Camera Mount Type | 3-Axis Gimbal |
| Camera Stabilization | Gimbal Image Stabilizer |
| Sensor Size | 1/3.2 inches |
| Pixels | 14 million |
| Optical Zoom | 3X |
| Angle of View (FOV) | 110° |
| Field of View | 90° |
| Video Maximum Resolution | 8K (7680*4320) via APP, 3840*2160 (TF Card) |
| Photo Resolution | 3840*2160 (20FPS) (TF Card), 1280*720 (APP) |
| Frame Rate | 30fps |
| Video Format | MP4, AVI |
| Photo Format | JPG |
| Obstacle Avoidance Types | Laser avoidance (Complete Omnidirectional Sensing) |
| Obstacle Avoidance Detection Distance | ≤15-20M |
| GPS | Yes |
| Connectivity | APP Controller, Remote Controller Control |
| Control Channels | 4 channels |
| Gyro | 6-axis |
| Display Control | Yes (5.5-inch remote control screen) |
| Expandable Storage | 32G-64-128G (SD Card, Not Included) |
| Removable/Replaceable Battery | Yes |
| Spotlight | Yes |
| Loudspeaker | No |
| Equipped with Aerosol Spraying System/Spread Tank Volume | No |
| Recommended Age | 14+ |
| Mobile Device System Version | iOS 8.0 or later / Android 4.4.4 or later |
Figure 3: Detailed Product Parameters
Figure 4: Drone Dimensions (Folded and Expanded)
5. Setup
5.1 Charging the Batteries
Before first use, fully charge both the drone battery and the remote control battery.
- Drone Battery: Connect the drone battery (11.4V 9800mAh) to the provided USB charging cable. Connect the cable to a suitable USB power adapter (not included). Charging time is approximately 6 hours.
- Remote Control Battery: The remote control has a built-in 7.4V 4600mAh battery. Connect the remote control to a USB power source using its charging port. Charging time is approximately 3.5 hours.
5.2 Propeller Installation
Carefully install the propellers according to the markings on the drone arms and propellers. Ensure they are securely fastened using the provided screwdriver. Incorrect installation can affect flight stability and safety.
5.3 Expanding the Drone
The KF100/KF100 MAX features a foldable design for portability. Gently unfold the drone arms until they lock into place. Refer to Figure 4 for expanded dimensions.
Figure 5: Foldable Design for Storage
5.4 SD Card Installation (Optional)
For higher resolution photo and video recording, insert a compatible SD card (32G-128G, not included) into the drone's designated slot. Ensure the card is inserted correctly before powering on the drone.
6. Operating Instructions
6.1 Remote Control Overview
The remote control features a 5.5-inch built-in screen running an Android system, eliminating the need for a separate mobile phone. It supports multimedia functions and can connect to WiFi.
Figure 6: Remote Control with Large Touch Screen
Figure 7: Remote Control Key Features (No phone needed, multimedia, WiFi, 20KM range, 800M altitude)
6.2 Pre-Flight Checks
- Ensure drone and remote control batteries are fully charged.
- Verify propellers are correctly and securely installed.
- Check for any physical damage to the drone or propellers.
- Ensure you are in an open area, clear of obstacles and people.
- Power on the drone, then the remote control. Wait for GPS signal acquisition.
6.3 Basic Flight Operations
Use the joysticks on the remote control for basic flight maneuvers. Refer to the remote control diagram (if available in the full manual) for specific control layouts.
- Takeoff/Landing: Typically a one-button function or specific joystick combination.
- Altitude Control: Left joystick (throttle).
- Directional Control: Right joystick (pitch and roll).
- Yaw Control: Left joystick (rotate left/right).
6.4 Intelligent Flight Features
The KF100/KF100 MAX drone is equipped with several intelligent flight modes to enhance your flying and photography experience.
- GPS One-Click Return: The drone can automatically return to its takeoff point in case of low battery, loss of signal, or manual activation.
- GPS Intelligent Tracking: The drone follows the remote control's GPS signal.
- Image Following: Identify a subject on the screen, and the drone will automatically follow it.
- Gesture Recognition: Within 1-3 meters of the drone, make specific hand gestures for photo or video capture.
- Multi-Point Route Planning: Plan a flight path on the APP interface, and the drone will fly autonomously along the pre-set route.
Figure 8: Fixed-point Trajectory Flight (Aerial Cartographer)
- Fixed-Point Surround: Select a center point, then use the joystick to define the desired radius for the drone to orbit.
Figure 9: 360-degree Surround Shooting and Intelligent Follow Shooting
- Aircraft Retrieval Function: In case of drone loss, click the GPS signal icon three times in the APP to view the last known distance, longitude, and latitude.
- One-Click Airdrop: The drone is equipped with a device at the bottom that allows for one-click airdropping of small items.
Figure 10: Drone with Airdrop Device
6.5 Camera Operation
The drone features an 8K HD camera with a 3-axis mechanical stabilization gimbal and EIS electronic stabilization for smooth, high-quality footage.
Figure 11: Three-Axis Mechanical Gimbal for Stable Shooting
Figure 12: Camera Gimbal Adjustable Angles
- Photo/Video Capture: Use the dedicated buttons on the remote control or the APP interface to take photos or start/stop video recording.
- Adjustable Camera Angle: The gimbal allows for remote adjustment of the camera angle (Tilt(X): -35° - +35°, Roll(Y): -100°- +70°, Adjustable Angle: -80°- +0°).
- Digital Zoom: The APP supports digital zoom for capturing details from a distance.
Figure 13: Digital Zoom Functionality
- EIS Electronic Stabilization: Ensures smooth video even during dynamic movements.
Figure 14: EIS Electronic Stabilization Effect
- Night Mode: The drone is equipped with a bottom night vision light for improved low-light photography.
Figure 15: Bottom Night Vision Light
6.6 Obstacle Avoidance System
The KF100/KF100 MAX features a 360-degree omnidirectional intelligent obstacle avoidance sensor (OAS Comprehensive 3.0 Module) that identifies dynamic obstacles and generates a three-dimensional avoidance channel. The detection distance is up to 15-20 meters.
Figure 16: Omnidirectional Obstacle Avoidance Sensor
Figure 17: 360-degree Omnidirectional Obstacle Avoidance Device
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the drone and remote control. Do not use harsh chemicals or solvents.
- Propellers: Regularly inspect propellers for cracks, bends, or damage. Replace damaged propellers immediately using the spare parts provided.
- Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge to about 50-60%.
- Storage: When not in use, fold the drone and store it in its original packaging or a protective case to prevent damage.
- Firmware Updates: Check the official website or APP periodically for firmware updates to ensure optimal performance and access to new features.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not power on | Low battery; Battery not properly connected | Charge the drone battery; Ensure battery is securely inserted. |
| Remote control does not connect | Low remote control battery; Interference; Not paired | Charge remote control; Move to an area with less interference; Re-pair drone and remote control (refer to full manual for pairing steps). |
| Poor image quality/shaky video | Insufficient light; Gimbal not calibrated; EIS not active; Propeller damage | Fly in well-lit conditions; Calibrate gimbal via APP; Ensure EIS is enabled; Check and replace damaged propellers. |
| Drone drifts during flight | GPS signal weak; Compass not calibrated; Wind interference | Fly in open areas with strong GPS signal; Perform compass calibration; Avoid flying in strong winds. |
| Obstacle avoidance not working | Sensor blocked; System error; Obstacle too small/fast | Ensure sensors are clean and unobstructed; Restart drone and remote; Note that obstacle avoidance has limitations. |
9. User Tips
- For optimal video quality, always use a high-speed SD card (Class 10 or U3 recommended) for recording directly on the drone.
- Practice basic flight maneuvers in a safe, open environment before attempting advanced intelligent flight modes.
- Regularly check the drone's propellers and motors for any debris or damage to ensure smooth operation.
- Utilize the built-in screen on the remote control for a more immersive and reliable FPV experience, especially in areas with potential phone interference.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.
11. Regulatory Compliance
This device complies with relevant regulations for recreational drones. Users are responsible for understanding and adhering to local laws and regulations regarding drone operation, including airspace restrictions, privacy concerns, and registration requirements. Illegal modification of drones is prohibited.
