1. Introduction
This series of products represents the latest generation of BSIDE Smart Digital multimeters. Designed with a 3.5-inch large display, it offers an excellent user experience. Its easy-to-use, single-button operation is highly appreciated by users. The ultra-thin body design ensures high portability.
With its exquisite appearance, reliable performance, and comprehensive functions, this multimeter meets the needs of various users and is an ideal tool for electricians, DIY enthusiasts, and home use.
- S7 Model: Features an LCD display.
- S7-USB Charging Model: Features a red/green display and a built-in 700mAh lithium battery.
2. Key Features
- Display: 6000 counts, 3.5-inch large screen (LCD for S7, Red/Green for S7-USB charging).
- Measurement Functions: AC/DC Voltage, Resistance, Frequency, Continuity.
- Special Functions: True RMS, Non-Contact Voltage (NCV) detection, Live Wire Check, Data Hold, Flashlight.
- Operating Mode: Manual Range (Auto Range for most functions).
- Safety: CAT II 600V rated.
- Power: Built-in rechargeable 700mAh lithium battery (S7-USB charging model) or C2302 x 2 (Built-in) for S7.
- Design: Ultra-thin and portable.
- Certifications: CE, FCC, RoHS.
Figure 2.1: The 3-Line Display shows voltage, frequency, and an analog bar for comprehensive test results.
Figure 2.2: Integrated LED Flashlight for working in low-light environments. A warning label advises removing test leads before replacing the battery or opening the case.
Figure 2.3: The S7-USB charging model features a built-in rechargeable Li-ion battery, eliminating concerns about power.
Figure 2.4: Panel Introduction showing the LCD display, power button, backlight switch, V-Alert Live Check, mode switch/flashlight button, and unibody test leads.
Figure 2.5: Overview of Main Test Functions including True RMS, 5999 counts, DC/AC Voltage, Continuity, NCV, Resistance, Frequency, Data Hold, Automatic Power Off, Flashlight, Auto Range, and Battery Undervoltage detection.
3. Package Contents
Please check the package carefully for the following items:
- 1 x BSIDE S7 Digital Multimeter (with integrated Test Leads)
- 1 x English User Manual
- 1 x Packing Box
- 1 x USB Charging Cable (for S7-USB charging model only)
- 1 x EVA Portable Cloth Bag
Figure 3.1: The S7 USB Charging model package includes the multimeter, test leads, USB charging cable, and user manual.
4. Setup
4.1 Initial Charging (S7-USB Charging Model)
For the S7-USB charging model, the multimeter comes with a built-in rechargeable lithium battery. Before first use, it is recommended to fully charge the device.
- Connect the provided USB charging cable to the multimeter's charging port.
- Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer's USB port.
- The display will indicate charging status. Once fully charged, disconnect the cable.
Video 4.1: Demonstration of the BSIDE S7 Multimeter, including USB charging, voltage measurement, continuity test, and NCV detection.
4.2 Test Leads
The BSIDE S7 multimeter features unibody test leads, meaning they are permanently attached to the device. Ensure the leads are not damaged before use.
5. Operating Instructions
5.1 Power On/Off
Press the Power Button () to turn the multimeter ON. Press and hold the Power Button to turn it OFF.
5.2 Mode Selection
The multimeter typically operates in AUTO mode, automatically detecting the measurement type. Use the SEL Button to cycle through specific functions if needed, such as V-Alert, Live Check, or other manual modes.
5.3 Measuring AC/DC Voltage
- Turn on the multimeter. It will usually default to AUTO mode.
- Connect the red test lead to the positive (+) side and the black test lead to the negative (-) side of the circuit or component you wish to measure.
- The display will show the voltage reading (AC or DC) and frequency (for AC).
Figure 5.1: Measuring AC voltage and frequency in an electrical panel. The display shows 'AUTO', '236.5V', and '50.0Hz'.
Figure 5.2: Measuring DC voltage of a 9V battery. The display shows 'DC', '9.5V', and temperature.
5.4 Measuring Resistance
- Turn on the multimeter and ensure it's in AUTO mode or Resistance mode (if manually selected).
- Ensure the circuit is de-energized before measuring resistance.
- Connect the test leads across the component whose resistance you want to measure.
- The display will show the resistance value in Ohms (Ω).
5.5 Non-Contact Voltage (NCV) Detection
- Press the SEL Button until the NCV mode is activated (indicated on the display).
- Move the top end of the multimeter close to the wire or outlet you want to test.
- The multimeter will beep and the display will show a changing bar graph (or 'Lo'/'Hi' for sensitivity) if AC voltage is detected.
5.6 Live Wire Check
- Press the SEL Button until the LIVE mode is activated.
- Touch the red test lead to the live wire.
- The display will show 'LIVE' and an alarm will sound if a live wire is detected.
Figure 5.3: Performing a live wire check. The display shows 'LIVE' and temperature, indicating a live circuit.
5.7 Continuity Test
- Turn on the multimeter and select Continuity mode (if not in AUTO).
- Ensure the circuit is de-energized.
- Connect the test leads across the component or wire.
- If the resistance is less than 30Ω, the beeper will sound, indicating continuity.
5.8 Data Hold Function
Press the HOLD Button to freeze the current reading on the display. Press it again to release the hold function.
5.9 Flashlight
Press the Flashlight Button (often integrated with the mode switch) to turn on the LED flashlight. Press it again to turn it off.
6. Maintenance
6.1 Cleaning
Wipe the multimeter casing with a damp cloth and mild detergent. Do not use abrasives or solvents. Ensure the device is completely dry before use.
6.2 Battery Care (S7-USB Charging Model)
To prolong the life of the built-in lithium battery:
- Avoid fully discharging the battery frequently.
- Charge the battery regularly, even if the multimeter is not in active use.
- Do not expose the device to extreme temperatures.
6.3 Test Lead Inspection
Regularly inspect the test leads for any signs of damage, such as cuts, cracks, or frayed insulation. Damaged leads can pose a safety hazard and should not be used.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Multimeter does not power on | Low or dead battery (S7-USB charging model) | Charge the multimeter using the USB cable. |
| Incorrect readings | Incorrect mode selected; Damaged test leads; External interference | Ensure correct mode (AUTO recommended); Inspect test leads for damage; Move away from strong electromagnetic fields. |
| Continuity test not beeping | Open circuit; Resistance too high | Ensure the circuit is complete; Check if the component's resistance is above 30Ω. |
| NCV/Live Check not detecting | No AC voltage present; Too far from source | Ensure the circuit is live; Bring the multimeter closer to the voltage source. |
8. Specifications
| Parameter | Value |
|---|---|
| Display | 6000 counts, 3.5 inch |
| DC Voltage | 0~600V ±(0.8%+3); Resolution: 0.01V |
| AC Voltage | 0~600V ±(1.2%+5); Resolution: 0.01V |
| Resistance | 1Ω-2000Ω ±(1.2%+5); 2000Ω-10MΩ ±(1.2%+3); Resolution: 1Ω |
| Frequency | 1Hz-1000Hz ±(1.0%+5) (ACV:2V-10V); Resolution: 0.1Hz |
| V-Alert (NCV) Low Sensitivity | 90~1000V(AC) |
| V-Alert (NCV) High Sensitivity | 6~1000V(AC) |
| Live Check | Alarm beep sounds, LCD screen display stripe |
| Continuity | Beeper sounds if resistance < 30Ω |
| Operating Temperature | 0 - 40 ℃ |
| Dimensions | 13.6*6.7*1.2cm |
| Weight | 110g |
| Battery (S7) | C2302 x 2 (Built-in) |
| Battery (S7-USB Charging) | Built-in 700mAh Lithium Battery |
| Certifications | CE, FCC, RoHS |
9. User Tips
- Always ensure the multimeter is in the correct mode for the measurement you are taking to avoid damage to the device or injury.
- When measuring resistance or continuity, always ensure the circuit is de-energized to prevent false readings or damage.
- For NCV detection, sweep the top of the multimeter along the wire or near the outlet for best results.
- Keep the display clean for optimal readability, especially in varying light conditions.
- Utilize the flashlight feature when working in dimly lit areas for improved visibility and safety.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the official BSIDE website. Keep your purchase receipt as proof of purchase for any warranty claims.
