Retekess T130U

Contents

Retekess T130U Wireless Radio Guide System

Instruction Manual

1. Introduction

The Retekess T130U is an advanced wireless radio guide system designed for clear and stable communication in various settings such as tours, conferences, and training. This system features full-digital signal transmission, ensuring high-quality audio and robust performance over long distances. Its user-friendly design, long battery life, and portability make it an ideal solution for effortless presentations and guided experiences.

Video: Overview of Retekess T130U features, including one-key operation, U-Band digital mode, 200m range, headphone compatibility, simultaneous MIC/AUX use, portability, and battery life.

2. Package Contents

Please check the package carefully to ensure all items are present and in good condition. The standard package includes:

  • Transmitter
  • Receiver(s)
  • Headset (earpiece)
  • Headset microphone
  • Lavalier microphone
  • USB cable
  • Lanyard
  • User manual
  • Charging base or multi-slot charging box (quantity and type may vary based on bundle)
Image showing the various components included in the T130U package.
Figure 2.1: Package Contents
A single T130U microphone accessory.
Figure 2.2: Microphone Accessory

3. Product Overview

The Retekess T130U system consists of a transmitter and one or more receivers, designed for intuitive use and clear audio transmission.

3.1. Transmitter

Hand holding the T130U transmitter, showing controls.
Figure 3.1: T130U Transmitter
Close-up of the T130U transmitter's large, user-friendly buttons.
Figure 3.2: Transmitter Buttons (Set, Power/Mute, Volume +/-)
Top view of the T130U transmitter showing AUX and MIC input ports.
Figure 3.3: Transmitter Top Ports (AUX, MIC)

3.2. Receiver

Receiver with an earpiece, showing compatibility with headphones.
Figure 3.4: T130U Receiver with Earpiece

3.3. Charging Solutions

32-slot charging case for batch charging and centralized storage of T130U devices.
Figure 3.5: 32-Slot Charging Case
60-slot charging box for efficient charging of multiple T130U devices.
Figure 3.6: 60-Slot Charging Box

4. Setup

4.1. Initial Charging

  1. Connect the charging base or multi-slot charging box to a power source using the provided power adapter.
  2. Place the transmitters and receivers into the designated slots in the charging unit.
  3. Ensure the charging indicator lights up, indicating that the devices are charging.
  4. Allow 2-3 hours for a full charge. The indicator light will change or turn off when charging is complete.

4.2. Connecting Accessories

  1. Microphone: Plug the headset microphone or lavalier microphone into the 'MIC' port on the top of the transmitter.
  2. Earpiece: Plug the earpiece into the audio output port (usually 3.5mm jack) on the receiver.
  3. Lanyard: Attach the lanyard to the designated loop on both the transmitter and receiver for easy carrying.

5. Operation

5.1. Power On/Off

  • Power On: Press and hold the power button (central button with a circle icon) on both the transmitter and receiver until the screen lights up.
  • Power Off (One-key Shutdown): Press and hold the power button on the transmitter. This will send a signal to all paired receivers to shut down simultaneously. Alternatively, press and hold the power button on individual units to power them off.

5.2. Pairing

The T130U system supports one-key pairing for convenience.

  1. Ensure both the transmitter and receivers are powered on.
  2. On the transmitter, press and hold the 'Set' button (usually located next to the power button) to initiate pairing.
  3. The transmitter will automatically search for and pair with available receivers. The channel number on the receiver's display should match the transmitter's channel.

5.3. Volume Control

  • Transmitter: Use the '+' and '-' buttons around the power button to adjust the microphone input level.
  • Receiver: Use the 'VOL+' and 'VOL-' buttons to adjust the listening volume through the earpiece.

5.4. Mute Function

  • One-key Mute: Briefly press the mute button (speaker icon with a cross) on the transmitter to mute the microphone input. Press again to unmute.

5.5. AUX Input

The transmitter features an AUX input port (3.5mm jack) allowing you to connect external audio sources (e.g., smartphone, MP3 player) to transmit music or pre-recorded messages to the receivers.

  • Plug your external audio device into the 'AUX' port on the transmitter.
  • The audio from the external device will be transmitted along with the microphone audio (if a microphone is also connected and active).

5.6. Automatic Power-Off

To conserve battery life, the system is designed to automatically shut down after 20 minutes if no signal is detected from the paired transmitter. This feature helps prevent accidental battery drain.

Diagram illustrating the automatic power-off feature after 20 minutes of no signal.
Figure 5.1: Automatic Power-Off Feature

6. Maintenance

6.1. Charging

  • Always use the original charging accessories provided with your system.
  • Avoid overcharging by disconnecting devices once fully charged, especially if not using a smart charging box.
  • Charge devices in a well-ventilated area.

6.2. Cleaning

  • Wipe the exterior of the transmitter and receiver with a soft, dry, lint-free cloth.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Keep the charging contacts clean and free of dust or debris.

6.3. Storage

  • Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
  • If storing for extended periods, ensure devices are partially charged (around 50%) to preserve battery health.
  • Use the provided charging case for organized and protected storage.

7. Troubleshooting

ProblemPossible CauseSolution
No sound from receiverReceiver volume too low; Earpiece not connected; Transmitter muted; Devices not paired; Out of range.Increase receiver volume; Ensure earpiece is fully plugged in; Unmute transmitter; Re-pair devices; Move closer to transmitter.
Poor audio quality/InterferenceObstructions between units; Other wireless devices nearby; Low battery.Reduce obstructions; Move away from other electronic devices; Charge devices fully.
Transmitter not transmittingTransmitter off; Microphone not connected or faulty; Low battery.Power on transmitter; Check microphone connection; Charge transmitter.
Devices not pairingIncorrect pairing procedure; Devices too far apart.Follow pairing instructions carefully; Ensure devices are close during pairing.
Short battery lifeIncomplete charging; Old battery.Ensure full charge (2-3 hours); Consider battery replacement if significantly degraded.

8. Specifications

FeatureSpecification
Brand NameRetekess
ModelT130U
CommunicationWireless
Set TypeTransmitter Sets
TransducerElectret Microphone
UseGuide System
StyleLavalier Microphone
OriginMainland China
CertificationCE, FCC
Signal-to-noise ratio-87dB
Operating temperature-10°C to 50°C
Working voltage3.7V
Frequency response range20Hz-4kHz
Channel spacing500K
Audio output/input connector3.5MM
AntennaExternal fixed antenna
Operating frequency rangeEuropean: 823-832/863-865MHz, America: 902-928MHz
Number of channelsEuropean: 20 ch, America: 50 ch
Transmitter Working hours10 hours
Receiver Working hours40 hours
Transmitting distanceUp to 200m / 656ft (unobstructed)
Charging time2-3 hours
Built-in BatteryYes
Transmitter Dimensions (H x W x D)107mm x 53mm x 16mm (4.21in x 2.09in x 0.63in)
Transmitter Weight71g (0.16lb)
Receiver Dimensions (H x W x D)73mm x 46mm x 14mm (2.87in x 1.81in x 0.55in)
Receiver Weight38g (0.08lb)
Dimensions and weight of the T130U transmitter and receiver, highlighting convenient carrying.
Figure 8.1: Dimensions and Weight
Comparison table of T130U, T130S, and T130 models, highlighting upgrades.
Figure 8.2: Model Comparison (T130U vs. T130S vs. T130)

9. User Tips

  • The T130U is praised for its lightweight design and good reception, making it comfortable for extended use.
  • Setup is straightforward and easy, even for new users.
  • The system supports both European (823-832/863-865MHz) and American (902-928MHz) frequencies, which can be switched as needed.
  • Its versatility makes it suitable for various applications, including theater stages, factory tours, and conferences.

10. Frequently Asked Questions (FAQ)

Q: How far can this device transmit data?

A: The maximum transmission distance between the transmitter and receiver is up to 200 meters / 656 feet in an unobstructed environment.

Q: How heavy is this product? Will it be tiring to wear for a long time?

A: The transmitter weighs 71g (0.16lb) and the receiver weighs 38g (0.08lb). They are designed to be lightweight and comfortable for long-term wear without causing fatigue.

Q: How is the battery life of this product?

A: The transmitter can operate continuously for 10 hours on a full charge, and the receiver can operate continuously for 40 hours.

11. Safety Information

  • Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
  • Avoid dropping or subjecting the device to strong impacts.
  • Keep the device away from water and other liquids. If it gets wet, power it off immediately and allow it to dry completely before use.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
  • Dispose of batteries and electronic components responsibly according to local regulations.
  • Use only manufacturer-approved accessories.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.