Usongshine TS5

Contents

TwoTrees TS5 Laser Engraving Machine User Manual

Model: TS5 | Brand: Usongshine

1. Introduction

The TwoTrees TS5 is a versatile 7W laser engraving and cutting machine designed for a wide range of materials, including metal, acrylic, and wood. Featuring APP and Wi-Fi control, it offers ease of use and precision for both hobbyists and professionals. This manual provides essential information for safe and effective operation of your TS5 engraver.

2. Safety Information

WARNING: Please read all safety instructions carefully before operating the machine.

  • Always wear laser safety glasses during use and avoid direct contact of the laser with your eyes and skin.
  • Do not engrave mirrored objects or metals with strong mirrored reflectivity, as this may cause injury to the operator or burn the laser.
  • Ensure the machine is placed on a stable, level surface.
  • Keep children and pets away from the operating area.
  • Operate in a well-ventilated area or use the exhaust system to remove fumes.

3. Setup

The TwoTrees TS5 comes 95% factory assembled, allowing for quick setup. Users typically only need to install the handle and laser module, which takes approximately 5 minutes.

  1. Unpacking: Carefully remove all components from the packaging.
  2. Handle Installation: Attach the handle to the designated slot on the machine.
  3. Laser Module Installation: Securely install the laser module into its position. Refer to the diagram below for visual guidance.
  4. Power Connection: Connect the power adapter to the machine and a suitable power outlet.
  5. Software Installation: Install the necessary software (e.g., LightBurn, GRBL) on your computer or mobile device for control.
Diagram showing the installation steps for the handle and laser module on the TwoTrees TS5 engraver.
Figure 3.1: Quick Assembly Steps for the TS5 Laser Engraver

4. Operating Instructions

4.1. Powering On and Connecting

  1. Press the power button on the machine. The indicator light will illuminate.
  2. Connect the engraver to your computer via USB or establish a Wi-Fi connection using the dedicated mobile application.
  3. Launch your engraving software (e.g., LightBurn, GRBL).
Video 4.1: Demonstration of TS5 Laser Engraver Setup and Operation

4.2. Using the Dual-Mode A-Axis Drive System

The TS5 features a versatile 4-in-1 rotary system for engraving cylindrical and irregular objects.

  • Chuck Mode: Equipped with two grippers and an internal support shaft. Ideal for various cup and ring-shaped workpieces.
  • Roller Mode: Utilizes a friction wheel assembly. Perfect for machining non-standard rotating parts such as wine bottles and curved musical instruments.
  • Ring Rotary: Specifically designed for engraving rings.
  • Sphere Rotary: For engraving spherical objects like baseballs.

To switch between modes, follow the instructions in your software and physically adjust the rotary attachments as needed. The system is designed for multiple clamping styles, upgradable and interchangeable.

Image showing the four different rotary modes: Chuck Rotary, Ring Rotary, Roller Rotary, and Sphere Rotary.
Figure 4.2: World's First 4-in-1 Rotary System
Image illustrating various clamping styles for different objects like wine glasses and mugs.
Figure 4.3: Multiple Clamping Styles

4.3. Engraving and Cutting

The 7W laser power is sophisticated for engraving and offers comprehensive cutting capabilities.

Diagram detailing engraving and cutting capabilities, listing materials like wood, acrylic, leather, cork, rock, glass, paper, and cutting thicknesses for wood (5mm) and acrylic (3mm).
Figure 4.4: Engraving and Cutting Capabilities

Laser Engraving Materials:

  • Wood
  • Acrylic
  • Leather
  • Cork
  • Rock
  • Glass
  • Paper

Note: The TS5 is a professional cup engraving machine, not recommended for engraving and cutting flat surfaces.

Laser Cutting Materials & Thicknesses:

  • Wood: Up to 5mm
  • Acrylic: Up to 3mm

Note: The TS5 is a professional cup engraving machine, not recommended for engraving and cutting flat surfaces.

4.4. Optimal Airflow System

The TS5 features an optimal airflow system with a high-speed fan and exhaust duct. This system ensures the cleanliness of the laser lens and efficiently directs fumes out, protecting the indoor air environment.

Diagram showing the internal fan and airflow path within the engraver, illustrating how fumes are extracted.
Figure 4.5: Optimal Airflow System

4.5. Enclosure Features

The fully enclosed structure provides a smoke and dust-free operating environment. It also features a magnetic closure design for easy access and disassembly.

Image showing the magnetic closure design of the engraver's enclosure, highlighting easy opening and access.
Figure 4.6: Magnetic Closure Design
Image showing the smoke and dust-free enclosure with an exhaust hose, ensuring a clean engraving environment.
Figure 4.7: Smoke and Dust Free Enclosure

5. Maintenance

  • Laser Lens Cleaning: Regularly inspect and clean the laser lens to ensure optimal performance and prevent residue buildup from engraving.
  • Airflow System: Periodically check the high-speed fan and exhaust duct for any obstructions or debris. Ensure proper ventilation to effectively remove fumes.
  • General Cleaning: Keep the interior and exterior of the machine clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • Rotary Attachments: Inspect rotary attachments for wear and tear. Lubricate moving parts if necessary, following manufacturer guidelines.

6. Troubleshooting

  • Machine Not Powering On: Check power connections and ensure the power button is fully pressed.
  • Laser Not Firing: Verify that the laser module is correctly installed and connected. Check software settings for laser power and enable status. Ensure safety interlocks (if any) are engaged.
  • Poor Engraving Quality:
    • Check focus of the laser.
    • Ensure the material is clean and properly secured.
    • Adjust engraving speed and power settings in the software.
    • Clean the laser lens.
  • Connection Issues (USB/Wi-Fi):
    • For USB, try a different port or cable. Reinstall drivers if necessary.
    • For Wi-Fi, ensure the machine is within range of your router and correctly configured in the app. Restart both the machine and your device.
  • Rotary System Malfunction: Ensure the chosen rotary attachment is correctly installed and calibrated in the software. Check for any physical obstructions.

7. Specifications

FeatureSpecification
Product Dimensions480 x 200 x 298 mm (19 x 7.9 x 11.75 inches)
Working Range249 x 123 x 123 mm
External Chuck Clamping DimensionsDiameter 26-140 mm
Internal Chuck Clamping DimensionsDiameter 15-110 mm
Adjustable Chuck Tilt-8° to +8°
Total Power60W
Laser Power7W
Wavelength450 ± 5 nm
Spot Size0.035 x 0.1 mm
ControllerGRBL
Smart DeviceYes (APP/Wi-Fi Control)
CNC or NotNormal

8. Warranty and Support

The warranty period for the TwoTrees TS5 Laser Engraving Machine is 12 months from the date of purchase.

8.1. Missing/Damaged/Defective Parts

  • Within 7 days of delivery: All parts will be replaced free of charge, including shipping.
  • After 7 days from delivery: All parts will be replaced free of charge. However, customers are responsible for shipping costs.

8.2. Parts Lost, Missing, Damaged, or Defective by the Courier Company

  1. Claims for lost or damaged goods must be reported to the carrier within their claim window. The customer must also notify us within 7 days of the delivery date.
  2. For all parts lost or damaged during transit, the customer must provide photos or videos and send us the information.
  3. Once the carrier dispute is resolved, please provide us with all communications with the carrier. The customer is responsible for keeping us informed of all communications with the carrier in a timely manner.
  4. For missing parts, customers should contact customer service.
  5. For damaged parts, customers should contact customer service and send photos or videos to us.

9. User Tips

  • Understanding Laser Power: The TS5 has a 7W laser. This refers to the optical output power, which is suitable for engraving a wide variety of materials and cutting thinner ones like 5mm wood or 3mm acrylic. Always match your material and desired effect to the appropriate power and speed settings in your software.
  • Material Testing: Before starting a large project, always perform small test engravings on scrap material to find the optimal power and speed settings for your specific material.
  • Ventilation is Key: Even with the optimal airflow system, ensure your workspace is well-ventilated to minimize exposure to fumes, especially when engraving materials like wood or acrylic.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.