Introduction
Thank you for choosing the YITAHOME LED Vanity Table. This stylish and functional vanity features a unique tempered glass tabletop, ample storage with 11 drawers, a large LED mirror with 3 color modes, and convenient built-in power outlets and USB ports. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity table.
Package Contents
The vanity table is packaged in two separate boxes. Please ensure you have received both packages before beginning assembly. Carefully unpack all components and verify against the parts list (typically included in the assembly guide within the packaging). If any parts are missing or damaged, please contact customer support.
Setup and Assembly
This vanity table requires assembly. Please follow the detailed assembly instructions provided in your product packaging. Ensure you have adequate space and the necessary tools (e.g., screwdriver, hammer) before starting. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
Key Assembly Considerations:
- Unpacking: Carefully remove all components from both boxes. Keep small parts in a tray to prevent loss.
- Part Identification: Refer to the parts list in your assembly guide to identify each component.
- Frame Assembly: Assemble the main vanity frame and drawer units first.
- Drawer Installation: Install the 11 drawers into their respective slots. Ensure smooth operation.
- Glass Tabletop: Carefully place the tempered glass tabletop. It is designed to allow visibility into the top drawer.
- Mirror Attachment: Securely attach the large LED mirror to the vanity table as per instructions.
- Stool Assembly: Assemble the accompanying stool.
- Power Connection: Once assembled, connect the vanity's power cord to a standard electrical outlet to power the LED mirror and built-in charging strip.
Operating Instructions
LED Mirror Operation:
- Power On/Off: Locate the touch switch on the mirror surface. Tap once to turn the LED lights on or off.
- Color Mode Adjustment: With the lights on, tap the touch switch repeatedly to cycle through the 3 available color lighting modes: cool white, natural, and warm yellow.
- Brightness Dimming: To adjust brightness, press and hold the touch switch. The light will gradually dim or brighten. Release when the desired brightness is achieved.
Built-in Charging Strip:
- The vanity is equipped with 2 standard plug sockets and 2 USB ports located on the side.
- Plug in your hair dryer, curling iron, phone charger, or other electronic devices directly into these ports for convenient access while getting ready.
Hair Dryer Rack:
- A dedicated rack is provided on the side of the vanity to conveniently store your hair dryer, keeping it within reach and organized.
Maintenance
- Cleaning Surfaces: Use a soft, damp cloth to wipe down the wooden/particle board surfaces. Avoid harsh chemicals that may damage the finish.
- Glass Tabletop and Mirror: Clean the tempered glass tabletop and mirror with a glass cleaner and a lint-free cloth to avoid streaks.
- Drawer Care: Periodically check drawer slides for smooth operation. If a drawer becomes stiff, a small amount of silicone lubricant can be applied to the slides.
- Electrical Components: Ensure all electrical connections are secure. Do not expose the power strip or mirror electronics to excessive moisture.
Troubleshooting
LED Mirror Lights Not Working:
- Check if the vanity is properly plugged into a working electrical outlet.
- Ensure the power switch on the mirror is being touched correctly.
- Verify that the power cord is securely connected to the vanity.
Built-in Power Outlets/USB Ports Not Functioning:
- Confirm the main power cord of the vanity is plugged in and receiving power.
- Test with a different device to rule out a faulty device.
- Avoid overloading the outlets; ensure the total wattage of connected devices does not exceed the vanity's specified limit (refer to product label if available).
Drawers Sticking or Not Closing Properly:
- Check for any obstructions inside the drawer or on the slides.
- Ensure the drawer slides are correctly aligned and installed.
- Verify that the vanity itself is on a level surface.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | YITAHOME |
| Style | Minimalist Modern |
| Material | Wooden (Particle Board) |
| Paint Technics | Spray Painting |
| Installation Method | Assembly |
| Number Of Drawers | 11 |
| With Mirror | Yes (LED with 3 color modes) |
| With Makeup Stool | Yes |
| Power Outlets | 2 Standard Sockets |
| USB Ports | 2 |
| Vanity Dimensions (Overall) | Approx. 53.5" W x 15.7" D x 54.7" H (136cm W x 40cm D x 139cm H) |
| Mirror Dimensions | Approx. 46" W x 24.4" H (117cm W x 62cm H) |
| Stool Dimensions | Approx. 15.7" W x 11.1" D x 15.1" H (40cm W x 28cm D x 38cm H) |
| Package Weight | Approx. 34.3 kg (75.6 lbs) |
Warranty and Support
For warranty information, technical support, or to report missing/damaged parts, please refer to the contact information provided in your product packaging or contact the seller directly. Keep your purchase receipt as proof of purchase.