1. Overview
The LAUNCH CRP129 HD V2 is a professional diagnostic tool designed to work with OBD II/CAN, J1587, J1708, and J1939 compatible vehicles. This full-system diesel diagnostic scanner performs OE-level diagnosis and analysis on all available systems for over 52+ brands and 10,000+ models (American, Asian, European, 1984-2024). It is compatible with 24V diesel vehicles, including trucks, buses, RVs, trailers, excavators, pickups, and agricultural machinery.
OBD II was installed in some 1994 and 1995 model year gasoline vehicles. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label, usually located under the hood or by the radiator. If the vehicle is OBD II compliant, the label will designate 'OBD II Certified'. Government regulations mandate that all OBD II compliant vehicles must have a 'common' 16-pin Data Link Connector (DLC).
Video: An overview of the LAUNCH CRP129 HD V2 OBD2 Scanner's features and capabilities.
1.1 Supported Truck Brands
- AUTOSEARCH, For CUMMINS, For DAF, DS_For USAFORD, HD_For AISIN, HD_For ALLISON, HD_For ASHOK_For LEYLAND, HD_AUTOSEARCH, HD_For BENDIX_ABS, HD_ For BENZ, HD_For CASE, HD_For CATERPILLAR, HD_For CREDO, HD_DEMO, HD_For DETROIT, HD_For DEUTZ, HD_For DOOSAN, HD_For EATON, HD_ For ERF, HD_For FLEXICOIL, HD_For FREIGHTLINER, HD_For FUSO, HD_For HINO, HD_For HYUNDAI, HD_For INTERNATIONAL, HD_For IRISBUS, HD_For IRIZAR, HD_For ISUZU, HD_For IVECO, HD_For JCB, HD_For KENWORTH, HD_For MAN, HD_For MAXXFORCE, HD_For MILLER, HD_For MWM, HD_For NEOPLAN, HD_OBD, HD_For PACCAR, HD_For PETERBILT, HD_For RENAULT, HD_For SETRA, HD_For SITCAR, HD_For STERLING, HD_For STEYR, HD_For TATA, HD_For VOITH, HD_For VOLVO, HD_For VOLVO_CE, HD_For WABCO_ABS, HD_For WESTERN_STAR, HD_For ZF, For MACK, For PERKINS, For SCANIA, For UD
1.2 Supported Engine Brands
- For Caterpillar, For Cummins, For Detroit, For Isuzu, For Paccar, For Perkins, For Volvo, For Maxxforce, For Hino, For Doosan, For Fuso
2. Specifications
| Feature | Specification |
|---|---|
| Model Name | CRP129 HD |
| Brand Name | LAUNCH |
| Item Type | Engine Analyzer |
| Display Size | 3.97 inches (Others) |
| Display Resolution | 800x480 |
| Operating System | Android 8.1 |
| CPU | 1.3GHz 4-Core processor |
| RAM | 2GB |
| ROM (Storage Space) | 16GB (System shows 12GB) |
| Battery Capacity | 3.7V/3000mAh |
| Charging Power | 5V 1.5A (7W) |
| Communication Interface | OBD-II |
| OBDII Input Voltage Range | 24V |
| Wireless Support | Wifi (802.11b/g/n 2.4GHz) |
| Software Update | Yes (2 years free update) |
| Hardware Version | NEWEST |
| Software Version | NEWEST |
| External Testing Certification | CE |
| FCC ID | XUJCREHDV2 |
| Item Weight | 2.5kg (Total product weight: 2.63 KG) |
| Item Dimensions (L x W x H) | 41inch x 20inch x 35inch (Packaging size: 323x254x131mm) |
| Main Line Length | 120cm |
| Operating Temperature | 0 to 50°C (32 to 122 F°) |
| Storage Temperature | -20 to 70°C (-4 to 158 F°) |
| Origin | Mainland China |
| Material | Plastic |
3. Package Contents
The following items are typically included in the package. Please note that accessories may vary for different product models. Refer to your actual package for detailed contents.
- CRP129 HD Device x 1
- OBD 16 PIN Cable x 1
- For CAT 9-PIN connector x 1
- OBD 6-PIN connector x 1
- Type II OBD 9-PIN connector x 1
- Carrying Box x 1
- User Manual x 1
- Quick Start Guide x 1

Image: Contents of the LAUNCH CRP129 HD V2 package.
4. Setup
4.1 Charging the Device
The CRP129 HD V2 can be charged using two methods:
- Via Diagnostic Cable: Insert the diagnostic cable into the vehicle's DLC port.
- Via Data Cable: Plug one end of a data cable (not included) into the charging port of the tool, and the other end to a PC or a compatible power adapter.
When the tool is powered on, the screen will automatically light up.
Note:
- Attempting to charge the tool via the OBD diagnostic port will consume the vehicle's battery power. This method is not recommended for charging the tool except during OBD diagnosis operations.
- The device contains an internal Lithium Polymer battery. To reduce the risk of fire or burns, do not disassemble, crush, pierce, or dispose of the battery in fire or water. Never leave the device unattended during charging; it must be placed on a non-flammable surface.
4.2 Getting Started
For initial use, follow these steps to configure the system settings:
- Power On: Power on the tool. The screen will display a welcome page. Tap “Start” to proceed.
- Language Selection: Choose your desired system language, then tap “Next”.
- Time Zone Selection: Choose the correct time zone, then tap “Next” to enter the WLAN setup screen.
- WLAN Setup: Slide the switch to ON. The system will search for available wireless LANs.
- If the network is open, you can connect directly.
- If the network is encrypted, enter the security key (network password).
- Network Connection: After the network connection is established, tap “Next Step”. If you chose “Ignore” in WLAN setup, it will go to the date setting page. If connected to the Internet, the system will automatically obtain the correct network date and time.
- User Agreement: Carefully read all terms and conditions of the user agreement. Check the box before “Agree to all the above terms”, and tap “OK” to finish the sign-up process and navigate to the Job Menu.
5. Operation
5.1 Connecting to the Vehicle
- Turn the vehicle's ignition off.
- Locate the vehicle's Data Link Connector (DLC) port. (Refer to the vehicle's owner manual for DLC location).
- Plug the diagnostic cable into the DB-15 diagnostic connector on the tool, and then tighten the captive screws.
- Select the appropriate heavy-duty vehicle adapter for your vehicle's DLC type.
- For standard OBD II DLC, plug the diagnostic cable into the vehicle's DLC port, and then tighten the captive screws.
- For non-standard OBD II DLC, connect one end of the adapter to the diagnostic cable, and the other end to the vehicle's DLC port.
- Turn the ignition on. The engine can be off or running.
Caution:
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- The adapter is keyed and will only fit one way. If you have problems connecting the adapter to the DLC, rotate the connector 180° and try again.
5.2 Job Menu Overview
The main menu screen provides access to the following function modules:
- Diagnose: Configures the tool for professional diagnostic operations.
- HD OBD: Provides a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform other emission-related services.
- Upgrade: Updates vehicle diagnostic software and APK. Requires a stable network connection.
- Reset: Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement.
- Settings: Manages data and system settings, including Network setup, Workshop information, and Brightness.
5.3 System Diagnostics
This function is designed for diagnosing electronic control systems of specific vehicle models.

Image: Visual representation of the OE-Level All System Diagnostic capabilities, showing various vehicle systems.
5.3.1 Automatic System Scan
This function quickly accesses the vehicle's electronic control systems by decoding the VIN, eliminating the need for manual menu selection. After connection, turn the ignition key on, and the system enters auto-detect mode.
Note:
- Ensure "Automatic detection on connect" in "Settings" is set to ON.
- A stable network connection is recommended for successful VIN access.
Once the VIN information is successfully obtained, the system will scan vehicle systems and automatically enter the system selection screen.
5.3.2 Manual Diagnosis
If the tool cannot decode the VIN information, you can perform vehicle diagnosis manually by following menu-driven commands step-by-step.
Note:
- Ensure the corresponding vehicle manufacturer software is installed.
- The diagnostic menu may vary by vehicle make, model, and year.
5.4 OBD Diagnosis
5.4.1 HD OBD
This option diagnoses electronic control systems of heavy-duty vehicles supporting J1939 and J1708 protocols. After connecting the tool, select "HD OBD" to access options like "System Automatic Search" or "System Manual Selection" to proceed with diagnostics.
5.4.2 EOBD II
This function quickly checks for DTCs, isolates the cause of the MIL, checks monitor status for emissions certification, and verifies repairs. After connecting, the tool automatically identifies the communication protocol and displays the Monitor Status.
Key functions include:
- Read Codes: Identifies which section of the emission control system has malfunctioned.
- Erase Codes: Clears fault codes from the vehicle after repairs. Ensure the ignition key is ON and the engine is OFF before performing this operation.
- I/M Readiness: Checks if emissions-related systems are operating properly and ready for Inspection and Maintenance testing.
- Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU.
- View Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-board Monitor Test: Retrieves test results for emission-related powertrain components and systems not continuously monitored.
- EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
- Vehicle Info: Retrieves VIN, CID (Calibration ID), and CVN (Calibration Verification Number).

Image: Overview of smart diagnostic features for maximum efficiency.
5.5 Reset Functions (7 Service Functions)
The tool offers various reset, coding, and relearn functions to restore vehicle systems to functional status after repairs or replacements. Available functions may vary by vehicle manufacturer, year, and model. Regular updates are recommended to access the latest service functions.

Image: The 7 Pro-Level Popular Maintenance Services offered by the tool.
- DPF Regeneration: Removes Particulate Matters (PM) from the DPF filter using combustion oxidation methods. Necessary when the exhaust back pressure sensor, PM trap, fuel additive nozzle, or catalytic oxidizer is replaced, or when the DPF regeneration MIL is on and maintenance is performed, or the DPF regeneration control module is replaced.
- Oil Reset: Resets the oil service for the engine oil life system. Required if the service lamp is on (after troubleshooting) or if the engine oil or electric appliances monitoring oil life have been changed.
- Injector Coding: Writes or rewrites injector actual codes in the ECU to control or correct cylinder injection quantity. Necessary after ECU or injector replacement.
- Speed Limit Reset: Adjusts or cancels the maximum vehicle speed limit.
- Cylinder Cut-off, Compression Test: Identifies improperly working cylinders by cutting off individual cylinders while the engine is running.
- Clutch Learning: Relearns clutch values for normal operation. Required after programming TCU, replacing gearbox, or TCU.
- Urea Drive (DEF): Drives the urea pump to perform reverse pumping. Necessary after urea pump maintenance.

Image: Advanced DPF Regeneration capabilities for various heavy-duty truck engines.
6. Maintenance
6.1 Software & App Upgrade
This function allows you to update the diagnostic app and software. All software is updated periodically, and it is recommended to install the latest versions for optimal service and experience.
- Diagnostic software pre-installed on the tool comes with 2 years of free updates.
- Diagnostic software purchased in the “Mall” includes one year of free updates.
Note:
- A stable network connection is required for updates.
- To update, tap "Upgrade" on the Job menu, then "Update" to start downloading. Software packages will install automatically upon completion.
6.2 Renew Subscription
When the free update period expires, the diagnostic software for the current version will be locked. To unlock it, you need to renew the subscription.
- Tap "Upgrade" on the Job menu to enter the update center.
- Software with expired subscriptions will be displayed in gray. Select the desired software and tap “Renew”.
- Input the 24-digit PIN code from your Subscription Renewal Card (purchased separately) and tap “Submit” to complete the renewal.
6.3 Settings
The "Settings" menu allows you to customize various aspects of the tool's operation:
- Units of Measurement: Set preferred units (Metric or English).
- Automatic Detection on Connect: Enable/disable automatic VIN detection upon vehicle connection.
- Display/Brightness: Adjust standby time and screen brightness.
- Sound: Adjust volume and other sound settings.
- Network: Configure WLAN for updates and email.
- Time Zone: Set the system time zone.
- Language: Select the preferred language (supports multiple languages).
- Workshop Information: Add a personalized tag to diagnostic reports.
- Recovery: Reset the tool to default factory settings. (Warning: This may cause data loss.)
- Clean Up: Clear cache files and free up storage space. The tool will reboot automatically after cleanup.
- Screen Capture: Enable a floating screenshot icon to capture the current screen. Screenshots are saved under Settings -> Data -> Image.
6.4 Data Management
The tool provides comprehensive data management features:
- Diagnostic Record: Stores running parameters or waveform graphs recorded by the user.
- Diagnostic Report: Stores all diagnostic reports generated during vehicle diagnosis.
- DTC Library: Provides details for Diagnostic Trouble Codes (DTCs) to simplify the diagnostic process.
- DLC (Data Link Connector) Location: Helps locate the vehicle's DLC.
- Image: Allows viewing and managing all screenshots.
- Feedback: Enables sending diagnostic problems to technical support for analysis.
- Firmware Fix: Upgrades and fixes diagnostic firmware. Do not cut power or switch interfaces during this process.
- User Manual: The user manual is integrated into the tool for easy access.
7. Troubleshooting (FAQ)
Here are some frequently asked questions and their solutions:
7.1 System halts when reading data stream. What is the reason?
This may be caused by a slackened connector. Turn off the tool, firmly connect the connector, and switch it on again.
7.2 Screen of the tool flashes at engine ignition start.
This is caused by electromagnetic disturbing and is a normal phenomenon.
7.3 There is no response when communicating with the on-board computer.
Confirm the proper voltage of the power supply. Check if the throttle has been closed, the transmission is in neutral, and the water is at proper temperature.
7.4 What to do if the system fails to start system scanning?
Check the following possible reasons:
- Whether the tool is properly connected to the vehicle's DLC port.
- Whether the "Automatic detection on Connect" switch is OFF. If it is, slide it to ON.
7.5 Why are there so many fault codes?
Usually, this is caused by poor connection or fault circuit grounding.
7.6 How to upgrade the system?
- Switch the tool on and ensure a stable internet connection.
- Tap "Settings" on the Job Menu, select “About” -> “Version”, and tap "Detect the System Version" to enter the system upgrading page.
- Follow the on-screen instructions to finish the process. This may take several minutes depending on internet speed. After the upgrade is successfully finished, the tool will automatically restart and enter the Job menu.
8. User Tips
- Regularly update the software for the best performance, new features, and expanded vehicle compatibility.
- Always ensure a stable internet connection when performing software updates or using VIN decoding features.
- For specific diagnostic procedures or complex issues, always refer to the vehicle's official service manual.
- Utilize the built-in "Feedback" function to report any issues or seek technical assistance directly from LAUNCH.
- Keep the device clean and dry, free from oil, water, or grease, using a mild detergent on a clean cloth for cleaning.
9. Warranty & Support
9.1 Warranty Information
This warranty is expressly limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover any part that has been abused, altered, used for a purpose other than intended, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects will be made by LAUNCH according to established procedures. No agent, employee, or representative of LAUNCH has the authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
9.2 Customer Service
If you have any questions regarding the operation of the unit, please contact the seller or LAUNCH Tech USA:
- Website: www.launchtechusa.com
- Phone: 877-528-6249 ext: 4 (General), 877-528-6249 ext: 5 (Service & Repair)
- Fax: 562-463-1590
- Address: 1820 S. Milliken Ave. Ontario, CA 91761
- Hours: Monday - Friday, 5 am - 5 pm PST (General), 8 am - 5 pm PST (Service & Repair)
- Public Forum: http://launch.activeboard.com
Statement:
LAUNCH reserves the right to make any change to this manual without notice. While every effort has been made to ensure accuracy, defects are inevitable. For any questions, contact your local dealer or LAUNCH TECH CO., LTD. LAUNCH does not bear responsibility for misunderstandings arising from this manual.
For the full user manual in PDF format, please refer to the official document: User manual (PDF)