INOKIM QUICK 4 Electric Scooter Light Module User Manual

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your MACURY Original Light Module, designed specifically as a DC Converter and LED Lamp Controller for the INOKIM QUICK 4 electric scooter. Please read this manual thoroughly before attempting any installation or use.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to your scooter:

• Disconnect Power: Always turn off the scooter and disconnect the battery before performing any installation or maintenance.
• Professional Installation Recommended: If you are not familiar with electric scooter wiring, it is highly recommended to seek professional assistance for installation.
• Handle with Care: Electronic components can be sensitive. Avoid dropping or subjecting the module to excessive force.
• Moisture Protection: Ensure the module is installed in a location protected from water and excessive moisture to prevent short circuits.
• Correct Polarity: Pay close attention to wire colors and connector types to ensure correct polarity during connection. Incorrect wiring can damage the module or scooter.

3. Package Contents

Your package should contain the following item:

• 1 x MACURY Light Module (DC Converter LED Lamp Controller) with integrated wiring harness.

4. Specifications

5. Installation Guide

This light module is a replacement part. Installation requires basic electrical knowledge and familiarity with your INOKIM QUICK 4 scooter's internal components. If you are unsure, please consult a qualified technician.

Required Tools (Not Included):

• Screwdriver set (appropriate for your scooter's fasteners)
• Wire cutters/strippers (if modifications are needed)
• Electrical tape or heat shrink tubing (for securing connections)
• Multimeter (for testing, optional but recommended)

Installation Steps:

1. Prepare the Scooter: Ensure the INOKIM QUICK 4 electric scooter is turned OFF and the battery is disconnected to prevent electrical shock or damage.
2. Access the Module Location: Locate the existing light module or the designated area for its installation on your scooter. This may require removing panels or covers. Refer to your scooter's original service manual for exact locations.
3. Disconnect Old Module (if replacing): Carefully disconnect all wiring from the old light module. Note the color coding and connector types for each wire. Taking photos before disconnecting can be helpful.
4. Connect New Module: Connect the wiring harness of the new MACURY Light Module to the corresponding connectors on your scooter. Ensure that each wire is connected to its correct counterpart (e.g., power to power, ground to ground, signal wires to signal wires). The module features various connectors (as shown in Figure 3) designed to match the scooter's existing wiring.
5. Secure the Module: Once all connections are made, secure the new light module in its designated location. Ensure it is stable and not exposed to excessive vibration or potential damage.
6. Test Functionality: Reconnect the scooter's battery and turn on the power. Test all light functions (headlight, taillight, brake light, turn signals if applicable) to ensure they are working correctly.
7. Reassemble Scooter: If all functions are verified, reattach any panels or covers removed during installation.

Important: The provided images show the module and its wiring harness. For detailed wiring diagrams specific to your INOKIM QUICK 4 model, please consult the official INOKIM service manual or a certified technician. Improper installation can lead to electrical malfunction or damage.

6. Operation

Once correctly installed, the MACURY Light Module functions as the DC converter and LED lamp controller for your INOKIM QUICK 4 electric scooter. Its operation is integrated with the scooter's existing control system:

• Automatic Conversion: The DC converter function automatically regulates the power supply to the lights.
• Light Control: The LED lamp controller manages the activation and deactivation of your scooter's LED lights (headlight, taillight, etc.) via the scooter's standard light switches or controls.
• No User Interaction: The module operates automatically in the background and does not require direct user interaction after installation.

7. Maintenance

The light module is designed for durability and requires minimal maintenance. However, regular checks can help ensure its longevity and proper function:

• Visual Inspection: Periodically inspect the module and its wiring for any signs of wear, corrosion, or damage.
• Connection Integrity: Ensure all electrical connections remain secure and free from looseness.
• Cleanliness: Keep the area around the module clean and free from dust, dirt, and debris. Use a dry, soft cloth for cleaning. Avoid using harsh chemicals or excessive moisture.
• Environmental Protection: Ensure the module remains protected from direct exposure to water, extreme temperatures, and harsh chemicals.

8. Troubleshooting

If you experience issues with your scooter's lights after installing the module, consider the following:

If you cannot resolve the issue using the troubleshooting steps above, please contact customer support.

9. User Tips

• Double-Check Connections: Many issues arise from loose or improperly seated connectors. Always ensure all plugs are firmly in place.
• Organize Wiring: After installation, use zip ties or electrical tape to neatly bundle and secure wires, preventing them from getting pinched or snagged.
• Regular Visual Checks: A quick visual inspection of your scooter's lights before each ride can help catch potential issues early.

10. Warranty and Support

For warranty information, technical support, or replacement parts, please contact the seller or MACURY customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Wuxi Aotu Electronic Co., Ltd.