HGLRC SPECTER F722 Lite

Contents

HGLRC SPECTER F722 Lite Flight Controller User Manual

Model: SPECTER F722 Lite

Introduction

The HGLRC SPECTER F722 Lite is an advanced, ultra-lightweight flight controller designed for high-performance FPV drones. It features an integrated ELRS 2.4G receiver, a powerful STM32F722 MCU, and an ICM42688P gyroscope, providing exceptional control and responsiveness for both freestyle and racing applications. This manual provides essential information for setting up, operating, and maintaining your SPECTER F722 Lite flight controller.

Setup and Installation

Package Contents

Verify that all items are present in your package:

  • 1x SPECTER F722 Lite flight control
  • 1x 25mm 8Pin flight control cable
  • 1x 90mm 2.4G T-type antenna
  • 1x 40mm 2.4G T-type antenna
  • 4x M3*8 shock absorber
HGLRC SPECTER F722 Lite Flight Controller and included accessories
Figure 1: HGLRC SPECTER F722 Lite Flight Controller and included accessories. This image also contains the wiring diagram and specifications.

Mounting

The SPECTER F722 Lite features a compact design with 20x20mm mounting holes, compatible with M3 screws. Use the provided M3*8 shock absorbers to minimize vibrations and protect the flight controller during operation.

HGLRC SPECTER F722 Lite Flight Controller mounted in a drone frame
Figure 2: Example of the SPECTER F722 Lite Flight Controller mounted, showcasing its compact integration.

Wiring Diagram

Refer to the following diagram for proper wiring connections. The flight controller supports a wide voltage input (8.4V-25.2V, 2-6S LiPo) and provides 5V 2A BEC output.

Detailed wiring diagram for HGLRC SPECTER F722 Lite Flight Controller
Figure 3: Comprehensive wiring diagram for connecting the SPECTER F722 Lite to various drone components.

Key connections include:

  • VIN/GND: Main power input (8.4V-25.2V).
  • 5V/GND: Regulated 5V output for peripherals.
  • TX1/RX1: UART1 for external receiver or other serial devices.
  • TX2/RX2: UART2 for external receiver or other serial devices.
  • CAM/GND: Camera input.
  • VTX/GND: Video Transmitter connection.
  • ELRS BOOT: Button for ELRS firmware flashing.
  • FC BOOT: Button for Flight Controller firmware flashing.

Operation and Configuration

Firmware

The flight controller comes pre-flashed with firmware version HGLRCF722MINI_4.5.1. For updates or re-flashing, use the FC BOOT button and connect to your computer via USB. The integrated ELRS 2.4Ghz R2 receiver can be updated independently using the ELRS BOOT button.

Key Features

  • F722 Main Control: Utilizes an STM32F722 MCU for double-precision floating point acceleration, offering millisecond-level flight command processing and a 40% increase in response speed compared to F4 series flight controllers.
  • High-Frequency PID Refresh: Supports high-frequency PID refresh rates, ideal for violent freestyle and extreme racing scenarios.
  • Wide Voltage Compatibility: Operates on 8.4V-25.2V (2-6S LiPo) power, making it suitable for a range of drones from light 3-inch cinewhoops to 7-inch long-range setups.
  • Integrated ELRS 2.4G Receiver: Simplifies installation and reduces weight by including an onboard ELRS 2.4G receiver, while still allowing for external receiver connection via serial port.
  • 5V/BAT Voltage Output: Provides both 5V regulated output and direct battery voltage (BAT) output, ensuring compatibility with most analog and HD video transmitters (VTX).

Maintenance

To ensure the longevity and optimal performance of your HGLRC SPECTER F722 Lite flight controller, follow these maintenance guidelines:

  • Regular Inspection: Periodically check all solder joints and connections for any signs of corrosion, loose wires, or damage.
  • Cleaning: Keep the flight controller free from dust, dirt, and debris. Use a soft brush or compressed air for cleaning. Avoid using liquids directly on the board.
  • Environmental Protection: Protect the flight controller from moisture and extreme temperatures. Consider conformal coating for enhanced water resistance if operating in damp conditions.
  • Firmware Updates: Regularly check for official firmware updates from HGLRC or Betaflight/ELRS. Updates can improve performance, add features, and fix bugs.

Troubleshooting

If you encounter issues with your SPECTER F722 Lite, consider the following troubleshooting steps:

  • No Power: Double-check all power connections (VIN/GND) and ensure your battery is charged and properly connected. Verify the polarity.
  • No Signal from Receiver: Ensure the ELRS 2.4G receiver is properly bound to your transmitter. Check wiring if using an external receiver. Verify receiver settings in Betaflight.
  • Flight Instability: Check motor direction and propeller orientation. Ensure PID settings are appropriate for your drone setup. Calibrate the accelerometer in Betaflight.
  • OSD Issues: Verify OSD settings in Betaflight. Ensure video connections (CAM, VTX) are secure.
  • Connection to PC Fails: Try a different USB cable and port. Ensure necessary drivers are installed. Try holding the FC BOOT button while plugging in USB.
  • Overheating: Ensure adequate airflow around the flight controller. Check for short circuits or incorrect wiring.

For more advanced troubleshooting, consult online forums, community groups, or HGLRC's official support resources.

Specifications

FeatureDetail
FC NameHGLRC F722 Lite
FirmwareHGLRCF722MINI_4.5.1
MCUSTM32F722
GyroscopeICM42688P
Barometerdps310
Operating Voltage8.4V-25.2V (2-6S LiPo)
BEC Output5V 2A
Black Box16MB
Serial UARTS5
Built-in ReceiverELRS 2.4Ghz R2
OSDSupported
Mounting Holes20x20mm, M3
Size28x28mm
Weight4g

User Tips

  • Solder Quality: Ensure all solder joints are clean and strong to prevent intermittent connections or shorts, which can lead to unexpected behavior or damage.
  • Power Filtering: While the FC has a BEC, consider adding an additional low ESR capacitor to your main battery lead for cleaner power, especially if experiencing video noise.
  • Antenna Placement: For optimal ELRS range, ensure the T-type antenna is mounted away from carbon fiber and other electronics, ideally perpendicular to other antennas.
  • Betaflight Configuration: Take time to properly configure Betaflight settings, including PID tuning, rates, and OSD elements, to match your flying style and drone setup.
  • Backup Settings: Always save a CLI dump of your Betaflight configuration before making significant changes or firmware updates.

Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or HGLRC customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.