ANDELI MCT-520DPL PRO

Contents

ANDELI MCT-520DPL PRO Multi-Function Welder Instruction Manual

Your comprehensive guide to operating and maintaining your ANDELI MCT-520DPL PRO welding machine.

1. Introduction

The ANDELI MCT-520DPL PRO is a versatile 5-in-1 multi-function inverter welding machine designed for a wide range of welding and cutting applications. It supports MIG, TIG, MMA, CUT, and COLD welding processes, including MIG Pulse for aluminum. This machine is suitable for welding aluminum, ordinary thin steel, iron, copper, mold repair, carbon steel, and stainless steel.

Key features include precise stepless adjustment, a digital display for easy control, advanced IGBT inverter technology, and a high-frequency TIG torch. Its compact design and robust construction make it ideal for various industrial and workshop environments.

Product Overview Video: Demonstrates the physical features and general operation of the MCT-520DPL PRO.

2. Safety Information

Always prioritize safety when operating welding and cutting equipment. Read and understand all safety warnings and instructions before use. Failure to do so may result in serious injury or death.

  • Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling fumes and gases.
  • Keep a fire extinguisher nearby and be aware of fire hazards.
  • Do not operate the machine in wet conditions or near flammable materials.
  • Ensure proper grounding of the equipment.
  • Disconnect power before performing any maintenance or changing accessories.

3. Setup and Installation

3.1 Unpacking and Inspection

Carefully unpack the welding machine and all accessories. Inspect for any damage that may have occurred during transit. The standard packing list includes:

  • 1 x MIG Torch
  • 1 x TIG Torch
  • 1 x MMA Torch
  • 1 x CUT Torch
ANDELI MCT-520DPL PRO Welder with accessories

Image: ANDELI MCT-520DPL PRO Welder with included MIG, TIG, MMA, and CUT torches.

3.2 Power Connection

Connect the machine to a 220V AC power supply with a frequency of 50/60Hz. Ensure the power outlet is properly grounded and can handle the machine's maximum load power capacity of 9.5KW.

3.3 Torch and Accessory Installation

The MCT-520DPL PRO supports various welding and cutting modes. Refer to the diagrams below for proper torch and accessory connections for each function.

Welding Torch Installation Diagrams for MIG/MAG, Flux MIG, MMA, TIG, Cold, and CUT

Diagrams: Step-by-step visual guide for connecting torches and ground clamps for MIG/MAG, Flux MIG, MMA, TIG, COLD, and CUT operations.

  • MIG/MAG: Connect the MIG torch and ground clamp as shown.
  • Flux MIG: Connect the Flux MIG torch and ground clamp.
  • MMA: Connect the electrode holder (MMA torch) and ground clamp.
  • TIG: Connect the TIG torch and ground clamp.
  • COLD: Connect the COLD torch and ground clamp.
  • CUT: Connect the CUT torch and ground clamp.

3.4 Wire Feeder Installation (for MIG/Flux MIG)

Open the side panel to access the wire feeder mechanism. Install the welding wire spool and thread the wire through the feeder rollers according to the instructions on the wire feeder unit. Ensure the wire tension is correctly adjusted.

Internal view of the wire feeder mechanism

Image: Internal view of the wire feeder mechanism, showing the spool holder and wire feed rollers.

3.5 Gas Connection (for MIG/TIG/CUT with gas)

For MIG (with gas), TIG, and CUT operations requiring shielding gas, connect the gas hose from your gas cylinder to the machine's gas inlet. Ensure all connections are secure and leak-free. Use appropriate gas for each process (e.g., CO2/mixed gas for MIG, Argon for TIG).

4. Operating Instructions

4.1 Control Panel Overview

The machine features an integrated digital display and intuitive controls for selecting modes and adjusting parameters.

Control Panel Introduction with numbered features

Image: Detailed view of the control panel, highlighting various indicators and adjustment knobs.

  1. Indicators: Wire Check, Gas Check, Storage Channel (0-9).
  2. Welding Mode Selection: MIG (CO2/MIX/Flux Welding), CUT (Plasma Cutting), TIG (TIG Welding), Cold (Cold Welding), MMA (Stick Welding), Pulse (Pulse TIG Welding).
  3. Gas/Feature Selection: CO2, MIX (Ar + CO2 Mixed), Flux (Flux Wire Welding), VRD (Voltage Reduction Device).
  4. Wire Size Selection: 0.6mm / 0.024" Welding Wire, 0.8mm / 0.030" Welding Wire, 0.9mm / 0.035" Welding Wire, 1.0mm / 0.040" Welding Wire, SP (Adjust Current/Voltage Separately).
  5. Trigger Mode: 2T (Manual Mode), 4T (Semi-automatic Mode).

4.2 Function-Specific Operation

Select the desired welding or cutting mode using the control panel. Adjust parameters such as current, voltage, wire speed, and gas flow according to the material thickness and type. The digital display provides precise feedback for adjustments.

  • MIG Function: Can weld 0.8-10mm carbon steel in MIG mode (CO2/MIX/Flux). For gas welding, use ordinary carbon steel wire. For gasless welding, use flux-cored wire. MIG Pulse function can weld 1-5mm aluminum plate.
  • MIG Welding in progress

    Image: Example of MIG welding application.

    Aluminum MIG Pulse Welding

    Image: Example of aluminum welding using MIG Pulse function.

  • TIG Function: Suitable for welding 0.8-8mm stainless steel, carbon steel, etc. (Note: The TIG function of this machine cannot weld aluminum).
  • TIG Welding in progress

    Image: Example of TIG welding application.

  • COLD Function: TIG supports cold welding function, suitable for welding thin plates of 0.4-3mm stainless steel, etc., minimizing distortion and discoloration.
  • Cold Welding application

    Image: Example of COLD welding application.

  • MMA Function: Suitable for continuous welding with 2.0-3.2mm electrodes.
  • MMA Welding in progress

    Image: Example of MMA welding application.

  • CUT Function: Contact plasma cutting, which can quickly cut steel plates within 8mm and has a maximum cutting capacity of 12mm.
  • Plasma Cutting in progress

    Image: Example of plasma cutting application.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to blow out internal components periodically, especially cooling vents.
  • Cable Inspection: Regularly inspect all cables, torches, and ground clamps for wear, cuts, or damage. Replace damaged components immediately.
  • Wire Feeder: Clean the wire feeder rollers and guide tubes to prevent wire feeding issues.
  • Consumables: Replace worn-out consumables (e.g., MIG tips, TIG electrodes, plasma nozzles) as needed.
  • Storage: Store the machine in a dry, clean environment when not in use.

6. Troubleshooting

This section provides general guidance for common issues. For complex problems, consult a qualified technician.

  • No Power: Check the power cord, circuit breaker, and ensure the machine is switched on.
  • Poor Arc/Weld Quality: Verify correct settings for current, voltage, wire speed (MIG), and gas flow. Check for proper grounding and clean work surface. Inspect consumables for wear.
  • Wire Feeding Issues (MIG): Check wire spool installation, wire tension, and ensure the wire is not tangled. Clean wire feeder rollers and liner.
  • Overheating: Ensure cooling vents are clear and the fan is operating. Allow the machine to cool down if the thermal protection indicator activates.

7. Specifications

Detailed technical specifications for the ANDELI MCT-520DPL PRO Multi-Function Welder:

MCT-520DPL PRO Detailed Specification Table

Table: Comprehensive technical specifications for MIG, MIG PULSE, Cold, TIG, MMA, and CUT functions.

AttributeValue
Material / Metal ProcessedCarbon steel, Stainless Steel, Aluminium alloy
Rated Input VoltageAC 220V-240V
Frequency50/60Hz
Max. Load Power Capacity9.5KW
Output PolarityDC TIG
Rated Duty Cycle @40°C (TIG)60%
Rated Output Voltage (TIG)70V
Efficiency80%~85%
Protection ClassIP21S
Insulation ClassH
CoolingFan
Weight (KG)14KG
Dimensions (MM)489x210x327
Applicable IndustriesBuilding Material Shops, Machinery Repair Shops, Manufacturing Plant, Construction works, Other
FeatureIntegrated Display

8. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the operating instructions and safety guidelines for best results.

9. Warranty and Support

The ANDELI MCT-520DPL PRO Multi-Function Welder comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, service, or warranty inquiries, please contact your retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the manufacturer's official website.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.