1. Introduction
The QYT KT-A16 is a high-performance handheld air band transceiver designed for aviation communication. Featuring a 6W output power, Superheterodyne Circuit, and a 1.77-inch TFT-LCD color screen, it offers reliable long-range communication and includes 10 NOAA weather forecast channels for the USA. This device supports both transmit (TX) and receive (RX) frequencies within the 108.00000-136.99975MHz range, making it an essential tool for pilots and aviation enthusiasts.
2. Package Contents
Please check the box for the following items:
- 1 × Radio Body (QYT KT-A16 Transceiver)
- 1 × Battery Pack (2000mAh)
- 1 × Antenna
- 1 × AC Adapter
- 1 × Desktop Charger
- 1 × Belt Clip
- 1 × Hand Strap
- 1 × English User Manual

3. Product Overview
Familiarize yourself with the various parts of your KT-A16 transceiver:

- Antenna
- Progress Knob
- Power/Volume Knob
- LCD Color Screen
- Microphone
- MENU Key
- UP Key
- Numeric Keypad
- EXIT Key
- DOWN Key
- Long Press Scan Key
- Long Press Keylock Switch
- External Speaker/MIC Connector
- Belt Clip
- Battery Pack
- VFO/MR Key/Emergency Key
- PTT Key (Push to Talk)
- Backlit Button
- ASQ Key (MONI)
4. Initial Setup
4.1. Battery Installation
- Ensure the radio is powered off.
- Align the battery pack with the battery compartment on the back of the radio.
- Slide the battery pack into place until it clicks securely.
4.2. Charging the Battery
Before initial use, fully charge the battery pack.
- Connect the AC adapter to the desktop charger.
- Plug the AC adapter into a power outlet.
- Place the radio with the battery installed into the desktop charger.
- The charging indicator on the charger will illuminate, typically red during charging and green when fully charged.

4.3. Attaching the Antenna
- Screw the antenna clockwise onto the connector on the top of the radio until it is finger-tight. Do not overtighten.
4.4. Attaching the Belt Clip
- Align the belt clip with the screw holes on the back of the radio.
- Secure it with the provided screws.
5. Operating Instructions
5.1. Power On/Off and Volume Control
- To power on, rotate the Power/Volume Knob (03) clockwise.
- To adjust the volume, continue rotating the Power/Volume Knob (03).
- To power off, rotate the Power/Volume Knob (03) counter-clockwise until it clicks.
5.2. Frequency and Channel Selection
The KT-A16 supports 200 memory channels and direct frequency input.

- Direct Frequency Input: Use the Numeric Keypad (08) to enter the desired frequency.
- Channel Mode: Press the VFO/MR Key (16) to switch between VFO (Frequency) mode and MR (Memory Channel) mode. In MR mode, use the UP/DOWN Keys (07/10) or the Progress Knob (02) to select a stored channel.
- Saving Channels: Refer to the full English manual for detailed instructions on saving frequencies to memory channels.
5.3. Transmitting (PTT)
To transmit, press and hold the PTT Key (17) on the side of the radio. Speak clearly into the Microphone (05). Release the PTT key to listen.
5.4. Scanning
The radio supports Time, Carrier, or Search scanning modes. Press the Long Press Scan Key (11) to initiate scanning. Refer to the full manual for mode selection and advanced scanning features.
5.5. NOAA Weather Channels
The KT-A16 includes 10 NOAA Weather forecast Channels for the USA. Access these channels to receive important weather alerts and information.
5.6. VOX Function
The Voice Operated Exchange (VOX) function allows for hands-free transmission. When VOX is enabled, the radio will automatically transmit when it detects your voice. Refer to the full manual for VOX activation and sensitivity adjustment.
6. Screen Display Instructions
The 1.77-inch TFT-LCD color screen provides essential operational information:

- Power Output Indicator Bar: Shows the current transmission power level.
- Battery Level Indicator: Displays the remaining battery charge.
- Current TX/RX Status: Indicates whether the radio is transmitting or receiving.
- Current Working Mode: Shows the active mode (e.g., AM).
- Main Frequency: The primary operating frequency.
- Secondary Frequency: A secondary frequency display.
- Battery Save Enabled: Indicates if battery save mode is active.
- Battery Voltage Indicator: Displays the current battery voltage (e.g., 8.1V).
- Noise Intensity: Shows the level of background noise.
- Signal Strength: Indicates the strength of the received signal.
- Model: Displays the radio model (KT-A16).
7. Technical Specifications
| Category | Parameter | Value |
|---|---|---|
| General | TX Frequency Range | 118.00000-136.99975MHz |
| RX Frequency Range | 108.00000-136.99975MHz | |
| WX Frequency Range | 161.650-163.275MHz | |
| Channel Spacing | 25kHz/8.33kHz | |
| Mode | 6k00A3E/5K60A3E 16K0G3E(WX) | |
| Number of Memory Channels | 200 | |
| Antenna Impedance | 50ohm | |
| Power Supply Requirement | 7.2V DC | |
| Operating Temperature Range | -10°C to +60°C (14°F to 140°F) | |
| Transmitter | Output Power | 6.0W (PEP), 1.8W (CW) |
| Modulation Limiting | 70-100% | |
| Audio Harmonic Distortion | Less than 10% (at 60% modulation) | |
| Hum and Noise Ratio | More than 35dB | |
| Spurious Emissions | More than 46dB | |
| Receiver | Receive System | Double conversion superheterodyne |
| Intermediate Frequencies | 1st 46.35MHz, 2nd 450kHz | |
| Sensitivity (COM/NAV/WX) | COM: < 0dBu (at 6dB S/N) NAV: < 3dBu (at 6dB S/N) WX: < -8dBu (at 12dB SINAD) | |
| Squelch Sensitivity (Threshold) | COM/NAV: < 0dBu | |
| Spurious Response Rejection Ratio | COM/NAV: > 60dB WX: > 30dB | |
| Physical | Dimensions (W×H×D) | 62mm × 128mm × 35mm |
| Weight | 239g (with 2000mAh Battery) | |
| Battery Capacity | 2000mAh |


8. Maintenance
8.1. Cleaning
Wipe the radio body with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the radio is powered off and dry before cleaning.
8.2. Battery Care
- Avoid overcharging or completely draining the battery.
- Store the battery in a cool, dry place when not in use for extended periods.
- If the battery performance degrades significantly, consider replacing it with an original QYT battery pack.
8.3. Storage
When storing the transceiver for long periods, remove the battery pack and store it separately. Keep the radio in a dry, dust-free environment away from extreme temperatures.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Low or dead battery; improperly installed battery | Charge the battery; ensure battery is correctly installed. |
| Cannot transmit or receive | Incorrect frequency/channel; antenna not connected; squelch too high | Verify frequency/channel; check antenna connection; adjust squelch level. |
| Poor audio quality | Weak signal; microphone/speaker obstruction; volume too low/high | Move to an area with better signal; check microphone/speaker; adjust volume. |
| Battery not charging | Charger/adapter faulty; poor contact with charging cradle | Check charger/adapter; ensure radio is properly seated in the cradle. |
10. User Tips
- Frequency Programming: If you need to write specific frequencies to the radio, contact the seller or manufacturer for the necessary software and instructions.
- External Headsets: For standard aviation headsets, a Push-to-Talk (PTT) adapter may be required to ensure compatibility and proper function.
11. Warranty and Support
The QYT KT-A16 comes with a ONE YEAR WARRANTY for the radio body, and THREE MONTHS for the battery, charger, and other accessories. This warranty covers manufacturing defects. For any issues or support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.